2 layers50 × 75 mm
2 layers55 × 75 mm
Aniweather
hackclub/asylum11- Size
- 55 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 27
- Pads
- 117
- Tracks, vias
- 219, 51
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241228)
- Created
- 16 Dec 2024
- Updated
- 26 Feb 2025
Overview
Aniweather is an open-source printed circuit board by hackclub, from the hackclub/asylum repository on GitHub, published under the MIT licence. It is a 2-layer board of 55 × 75 mm with 37 parts on 27 nets, routed with 219 tracks and 51 vias.
It is built around the TPS63001DRC. Its parts include 9 capacitors, 7 resistors, 4 ICs, 3 switches and 2 diodes.
Main components
1README
README.mdasylum
placeholder repo for Hack Club's asylum YSWS (zach plz make the real one)
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Tiny | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C3, C4, C9 |
| 4 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R7 |
| 3 | 10uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C6, C7, C8 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | D | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | LOGO | LOGO | G1, G2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW2, SW3 |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C5 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 2.2uH | asylum:NR3015T2R2M | L1 |
| 1 | Battery_Cell | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | BT1 |
| 1 | SW_DIP_x01 | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 1 | TPS63001 | Package_SON:Texas_DRC0010J_ThermalVias | U5 |
| 1 | ~ | asylum:ST7735 | U1 |
| 1 | ~ | asylum:WEMOS_C1_mini | U2 |
| 1 | ~ | asylum:TP4056 | U3 |
More from hackclub/asylum
7- 2 layers78 × 52 mm
- 2 layers95.2 × 39 mm
- 2 layers35.5 × 59 mm
- 2 layers37 × 41 mm
- 2 layers66.5 × 60.3 mm
- 2 layers58 × 34.5 mm
Similar boards
- 4 layers95 × 55.5 mm
EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
137 parts2kApache-2.0 - 2 layers54 × 11.6 mm
- 2 layers53.5 × 101.8 mm
Sony scopeman
lucysrausch/sony-scopeman
Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector display.
135 parts69 - 4 layers88 × 30 mm
- 2 layers82 × 42 mm
Open authenticator
Open-Authenticator/hardware-design
Hardware design files for open authenticator
86 parts42MIT - 4 layers83 × 83 mm
Blinkekatze
TobleMiner/blinkekatze
Blinkekatze, a replacement PCB to turn cat themed night-lights into interactive light displays
134 parts34 - 2 layers148.6 × 192.2 mm
Badge
NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software
169 parts31GPL-3.0 - 4 layers344 × 117.5 mm
Questions
How big is the Aniweather PCB?
It measures 55 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Aniweather use?
37 parts, built around the TPS63001DRC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Aniweather KiCad files?
From the hackclub/asylum repository on GitHub, at the commit this page was made from: the board is designs/weather_stations/aniweather/pcb/aniweather.kicad_pcb and its schematic designs/gameboy/gameboy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Aniweather design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).