Skip to the content
4 layers75 × 130 mmESP32GPSPCB, the printed circuit board in 3D

just adding it here temporarily to sync hackatime with it!

Size
75 × 130 mm
Copper layers
4
Thickness
1.6 mm
Parts
67
Nets
101
Pads
357
Tracks, vias
769, 203
Pours
9
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
8 Jun 2026
Updated
1 Jul 2026

Overview

ESP32GPSPCB is an open-source printed circuit board by uzzambutt, from the uzzambutt/ESP32_Offline_GPS_MAPS repository on GitHub. It is a 4-layer board of 75 × 130 mm with 67 parts on 101 nets, routed with 769 tracks and 203 vias.

It is built around the TPS63001DRC, AP2112K-3.3 and ICM-20948, with the MCP73871-2AAI/ML, NEO-M8N and TXS0104ED among its other parts. Its parts include 22 capacitors, 17 resistors, 9 ICs, 9 connectors and 5 diodes. It belongs with the ESP32 boards of this library.

Main components

7

README

ESP32GPSPCB/readme.md

just adding it here temporarily to sync hackatime with it!

Parts

67
QtyValueFootprintReferences
410uFCapacitor_SMD:C_0603_1608MetricC5, C6, C7, C12
41kResistor_SMD:R_0402_1005MetricR1, R3, R10, R11
30.1uFCapacitor_SMD:C_0402_1005MetricC18, C21, C22
3100nFCapacitor_SMD:C_0603_1608MetricC8, C16, C17
3Conn_01x04_SocketConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1, J4, J6
20.1uFCapacitor_SMD:C_0603_1608MetricC11, C14
210kResistor_SMD:R_0402_1005MetricR4, R9
21uFCapacitor_SMD:C_0603_1608MetricC19, C20
222uFCapacitor_SMD:C_0805_2012MetricC9, C10
24.7kResistor_SMD:R_0402_1005MetricR13, R14
24.7uFCapacitor_SMD:C_0805_2012MetricC1, C2
25.1kResistor_SMD:R_0402_1005MetricR6, R7
2LEDLED_SMD:LED_0805_2012MetricD4, D5
10.1uFCapacitor_SMD:C_0805_2012MetricC3
1100Resistor_SMD:R_0402_1005MetricR16
1100kResistor_SMD:R_0603_1608MetricR17
1100nF_DecoupCapacitor_SMD:C_0402_1005MetricC13
110KResistor_SMD:R_0402_1005MetricR15
110mΩResistor_SMD:R_0402_1005MetricR12
11KResistor_SMD:R_0402_1005MetricR2
12.2uHInductor_SMD:L_0402_1005MetricL2
122RResistor_SMD:R_0402_1005MetricR5
122uFCapacitor_SMD:C_0603_1608MetricC15
127uHInductor_SMD:L_0603_1608MetricL1
12KResistor_SMD:R_0402_1005MetricR8
1470nFCapacitor_SMD:C_0603_1608MetricC4
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U4
1AntennaConnector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_VerticalAE1
1Battery InputConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ9
1Boot OptionConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5
1CR2032Battery:BatteryHolder_Keystone_500BT1
1Conn_01x05_SocketConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ7
1Conn_01x14_SocketConnector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_VerticalJ3
1DDiode_SMD:D_0603_1608MetricD3
1ESP32-S3-WROOM-1-N16R16VARF_Module:ESP32-S3-WROOM-1U6
1FIXLED_SMD:LED_0805_2012MetricD2
1ICM-20948Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mmU7
1LEDLED_SMD:LED_0402_1005MetricD1
1Logic extra channelConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ8
1MAX17261xxTDPackage_DFN_QFN:TDFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mmU5
1MCP1700x-180xxTTPackage_TO_SOT_SMD:SOT-23U8
1MCP73871-2AAPackage_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mmU2
1NEO-M8NRF_GPS:ublox_NEOU1
1RSTButton_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2SW1
1TPS63001Package_SON:Texas_DRC0010J_ThermalViasU3
1TXS0104EDPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU9
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01AJ2

Similar boards

  • 2 layers120 × 100 mmCh bot, the printed circuit board in 3D

    Ch bot

    doabayomi/horizon-pcb

    PCB Design for the Horizon Controller Prototype (REV 1)

    271 parts
  • 2 layers100 × 80 mmAlarm clock, the printed circuit board in 3D

    Alarm clock

    Carabouille/Alarm_Clock_dawn_simulator

    A description of my Alarm clock with dawn simulator for the Fallout event organised By Hackclub

    75 parts
  • 4 layersDSProject, the printed circuit board in 3D

    DSProject

    StefVuck/DesignSpecialProject5

    84 parts
  • 4 layers55 × 110 mmPico drone pcb, the printed circuit board in 3D

    Pico drone pcb

    Torbjorn-Lund/pico_drone_pcb

    PCB for raspberry pi pico powered drone

    65 parts
  • 2 layers50.8 × 50.8 mmMain pcb v1, the printed circuit board in 3D

    Main pcb v1

    peterkrull/quad

    Firmware, hardware and documentation for my autonomous quad copter project

    37 parts210GPL-3.0
  • 2 layers100 × 50 mmKiwiigo, the printed circuit board in 3D

    Kiwiigo

    spdidle/kiwiigo

    kiwi on the go

    27 parts2

Questions

How big is the ESP32GPSPCB PCB?

It measures 75 × 130 mm and has 4 copper layers, 1.6 mm thick.

What parts does the ESP32GPSPCB use?

67 parts, built around the TPS63001DRC, AP2112K-3.3, ICM-20948 and MCP73871-2AAI/ML. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32GPSPCB KiCad files?

From the uzzambutt/ESP32_Offline_GPS_MAPS repository on GitHub, at the commit this page was made from: the board is ESP32GPSPCB/ESP32GPSPCB.kicad_pcb and its schematic ESP32GPSPCB/ESP32GPSPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32GPSPCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask uzzambutt before reusing the design.