Skip to the content

Boards using the TPS54360DDA

35 boards

Boards in 24 GitHub repositories, designed in KiCad, that use the TPS54360DDA by Texas Instruments (-40℃~+150℃@(TJ) 1 146uA 2.5MHz 3.5A 4.5V~60V 800mV~58.8V Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHS). See how each wires it, with its parts, size, README and files; the TPS54360DDA’s symbol, footprint and pinout are on its own page.

  • 2 layers58 × 45 mmVfd ps, the printed circuit board in 3D

    Vfd ps

    esynr3z/vfd-ps

    Power supply and filament driver for vacuum fluorescent display (VFD)

    51 parts15
  • 4 layers108 × 74 mmSTM32 Drone, the printed circuit board in 3D

    STM32 Drone

    bassammorsy/stm32-flight-controller

    Custom 4-layer STM32F405RGTx quadcopter flight controller PCB designed in KiCad. Betaflight compatible, 4S–6S LiPo input, SMT assembled by JLCPCB.

    104 parts3MIT
  • 4 layers100 × 100 mmPcb AMY, the printed circuit board in 3D

    Pcb AMY

    Rivercraft911/R-01_Raster_Laser_Projector

    Red, blue and green lasers combine through two dichroc mirrors and bounce off a spinning polygon mirror, which each mirror facet makes one scanline.

    159 parts1
  • 2 layers119.5 × 60 mmFuturesight, the printed circuit board in 3D

    Futuresight

    birbh/FutureSight_CAR

    ii. For macos/Linux users: Linux and Mac usually recognize the RNDIS interface automatically, but you need to check if the network interface is active. - Open Terminal: Run ip a (Linux) or ifconfig (Mac).

    40 parts
  • 4 layers230 × 135 mmVancontroller, the printed circuit board in 3D

    Vancontroller

    Camperlux/vancontroller

    VanController: ESP32-S3 12 V campervan controller board (6 fused relays, 6 PWM dimmers, CAN, RS485, GPS) - KiCad 10 design, manufacturing files and enclosure. Free for non-commercial use.

    259 parts
  • 2 layers101.3 × 62.2 mmIium sumo, the printed circuit board in 3D

    Iium sumo

    edsamv/iium_sumo_pcb

    58 parts
  • 4 layers100 × 100 mmSmc power, the printed circuit board in 3D

    Smc power

    efebasol/StepperMotorController

    Rev A — single-motor bench prototype power board. Feeds the driver board (48 V), the stepper motor brake (24 V) and the logic (5 V / 3V3).

    104 parts
  • 2 layers58 × 58 mmUps lead acid electgpl v1.0, the printed circuit board in 3D

    Ups lead acid electgpl v1.0

    electgpl/MiniUPS12VLead-Acid

    This project implements a mini uninterruptible power supply (UPS) designed for 12V Lead-Acid AGM/GEL batteries. It integrates a dedicated CN3767 lead-acid charger, a PMOS + Schottky bypass circuit, a TPS54360 buck…

    78 parts
  • 4 layers36 × 36 mmFc f405, the printed circuit board in 3D

    Fc f405

    fkontiebo/flight-controller

    Contrôleur de vol 4 layers basé sur STM32F405RGT6, conçu comme plateforme de navigation autonome avec bus CAN.

    97 partsMIT
  • 2 layers100 × 100.1 mmRobot design competition, the printed circuit board in 3D

    Robot design competition

    JCY2515/robot-design-competition

    Includes PCB design , schematic , photos and videos of robot running

    124 parts
  • 2 layers100 × 72.5 mmSETT Telemetri, the printed circuit board in 3D

    SETT Telemetri

    kaanfurkankaya/SETT-Telemetri-Karti

    SETT Formula telemetry PCB hardware design

    62 parts
  • 4 layers48 × 48 mmRobotic actuator TMC, the printed circuit board in 3D

    Robotic actuator TMC

    mefe00/NEMA17_Control_Card

    A driver board designed for direct mounting to the rear of NEMA17 motors and supporting PID control algorithms. Please read the README.md for features and applications. Development and work on new versions are ongoing.

    73 parts
  • 4 layers50.3 × 50 mmBuck converter, the printed circuit board in 3D

    Buck converter

    mkhan-eeng/buck-converter-5v3a

    First-principles design of a 12V to 5V 3A asynchronous buck converter (TI TPS54360); full calculations, Type II loop compensation, and 4-layer KiCad PCB.

    23 parts
  • 4 layers65 × 56 mmPI CNC, the printed circuit board in 3D

    PI CNC

    muccc/PI-CNC

    CNC Shield for Raspberry PI with Atmega 2560 GRBL

    27 parts
  • 4 layers50 × 50 mmLFX FC R2, the printed circuit board in 3D

    LFX FC R2

    nguyencanhanh/luckfox-rv1103-drone

    AI quadcopter on one RV1103 (Luckfox Pico Mini B): Linux + RISC-V MCU flight loop, SITL with 3D pilot view, KiCad flight-controller board

    142 partsMIT
  • 4 layers100 × 65 mmSTS1 GS TRX Switch, the printed circuit board in 3D

    STS1 GS TRX Switch

    SpaceTeam/STS1_GS_TRX_Switch

    Simple PCB for transmit/receive switching for our groundstation

    107 partsMIT
  • 2 layers100 × 80 mmSatnogs controller, the printed circuit board in 3D

    Satnogs controller

    tt-laboratories/satnogs-rotator-controller

    Repository includes all source files of PCB's for the SatNOGS rotator controller assembly.

    107 parts
  • 4 layers76.9 × 70.3 mmSTC mainboard, the printed circuit board in 3D

    STC mainboard

    wargod1029/PCB-design

    Brief - Dual brushed motor driver board using BTS7960b half bridge IC. Designed for large power motor (24V, 15A)

    175 parts
  • 4 layers100 × 90 mmControl board, the printed circuit board in 3D

    Control board

    EERNINUO/ArbWave30

    ArbWave30 – 30MHz 任意波形发生器 | FPGA + 高速DAC | SCPI 可控

    149 parts53GPL-3.0