
Bf-034
botanicfields/PCB-MBUS-AquesTalk-pico-LSI
MBUS Module of AquesTalk pico LSI for M5Stack

Power supply and filament driver for vacuum fluorescent display (VFD)
Vfd ps is an open-source printed circuit board by esynr3z, from the esynr3z/vfd-ps repository on GitHub. It is a 2-layer board of 58 × 45 mm with 51 parts on 22 nets, routed with 163 tracks and 19 vias.
It is built around the LM4871, TPS54360DDA and BZX84C4V7, with the MBRA340 among its other parts. Its parts include 15 capacitors, 12 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the lEDs and displays and power boards of this library.
Main parts of the VFD power supply: inverting buck-boost converter on TPS54360 (supposed to use with ICs like PT6311 and etc) and filament driver on LM4871.
Inverting converter:
Filament driver:
Schematic and pcb layout created in KiCad 6 Nightly Build (compatible with KiCad 5).

misc folder contains some calculation and simulation sheets for several IC to get negative voltages| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | TestPoint | esynr3z_TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | 22u | esynr3z_Capacitor:C_1210 | C1, C2, C3, C12 |
| 3 | 10k | esynr3z_Resistor:R_0805 | R8, R9, R12 |
| 3 | 4.7u | esynr3z_Capacitor:C_1210 | C6, C7, C8 |
| 3 | Conn_01x04 | esynr3z_Connector:PinHeader_1x04_P2.54mm_Vertical | J1, J2, J3 |
| 2 | 100 | esynr3z_Resistor:R_0805 | R7, R11 |
| 2 | 1u | esynr3z_Capacitor:C_1206 | C4, C15 |
| 2 | 2.2k | esynr3z_Resistor:R_0805 | R6, R10 |
| 2 | 22u | esynr3z_Capacitor:CP_Elec_6.3x7.7 | C11, C13 |
| 2 | 50 | esynr3z_Potentiometer:Bourns_3362P | RV2, RV3 |
| 2 | dnf | esynr3z_Resistor:R_0805 | R1, R3 |
| 1 | 1.8n | esynr3z_Capacitor:C_0805 | C10 |
| 1 | 100n | esynr3z_Capacitor:C_0805 | C5 |
| 1 | 10n | esynr3z_Capacitor:C_0805 | C14 |
| 1 | 220k | esynr3z_Resistor:R_0805 | R4 |
| 1 | 220n | esynr3z_Capacitor:C_0805 | C9 |
| 1 | 33u | esynr3z_Inductor:Sumida_CDRH127 | L1 |
| 1 | 36k | esynr3z_Resistor:R_0805 | R2 |
| 1 | 50k | esynr3z_Potentiometer:Bourns_3362P | RV1 |
| 1 | 6.8k | esynr3z_Resistor:R_0805 | R5 |
| 1 | BZX84C4V7 | esynr3z_SOT:SOT-23 | D2 |
| 1 | LM4871 | esynr3z_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LOGO | esynr3z_Symbol:iv18_draw | G*** |
| 1 | LOGO | esynr3z_Symbol:esynr3z_logo_4.5x8.4mm_Silk | G*** |
| 1 | MBRA340 | esynr3z_Diode:SMA | D1 |
| 1 | SolderJumper_2_Bridged | esynr3z_Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1 |
| 1 | TPS54360DDA | esynr3z_SO:TI_SO-PowerPAD-8_ThermalVias | U1 |
The 47 most common of 51 parts.

botanicfields/PCB-MBUS-AquesTalk-pico-LSI
MBUS Module of AquesTalk pico LSI for M5Stack



generationmake/ArduTrxShield
ArduTrx - Open Source Hamradio Transceiver for Arduino

lbauchwitz/ESP32_nano_uhf_radio
GPL Diagram, Kicad Sources and Gerber files for a super small 430 Mhz UHF Radio module

botanicfields/PCB-Grove-AquesTalk-pico-LSI
AquesTalk pico LSI into the Grove of M5


themainframe/5g-m2-usb3-interface-pcb
KiCad EDA Project for my 5G M.2 (NGFF) USB3 Interface board
It measures 58 × 45 mm and has 2 copper layers, 1.6 mm thick.
51 parts, built around the LM4871, TPS54360DDA, BZX84C4V7 and MBRA340. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the esynr3z/vfd-ps repository on GitHub, at the commit this page was made from: the board is vfd-ps.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask esynr3z before reusing the design.