
TPS54360DDA
Texas InstrumentsExtended
-40℃~+150℃@(TJ) 1 146uA 2.5MHz 3.5A 4.5V~60V 800mV~58.8V Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHS
- Part id
- ti/TPS54360DDA
- Category
- DC DC Converters
- Package
- SOIC-8-EP
- Pins
- 9
- In stock
- 55,196 at JLCPCB (C44377)
- Used on
- 35 open-source boards
Overview
The TPS54360DDA is a DC DC Converter made by Texas Instruments in a SOIC-8-EP package with 9 pins. -40℃~+150℃@(TJ) 1 146uA 2.5MHz 3.5A 4.5V~60V 800mV~58.8V Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (Regulator_Switching:TPS54360DDA, from KiCad's library) and its footprint (Package_SO:TI_SO-PowerPAD-8, from KiCad's library), ready for a KiCad board. 55,196 are in stock at JLCPCB (part C44377). 35 open-source boards in 24 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
13- Supply, least
- 4.5 V · VIN, minimum operating input voltage · p. 7
- Supply, most
- 60 V · VIN, maximum recommended operating · p. 5
- Supply, absolute maximum
- 65 V · VIN, absolute maximum · p. 5
- Junction, hottest
- 150 °C · maximum operating junction temperature · p. 5
- Takes working
- 146 µA · VIN, typical nonswitching quiescent current, FB = 0.9 V, TA = 25°C · p. 7
- Takes asleep
- 2.25 µA · VIN, typical shutdown current, EN = 0 V, 25°C · p. 7
- Gives
- 3.5 A · maximum continuous output current · p. 5
- Current limit
- 5.5 A · typical open-loop current limit, all VIN and temperatures · p. 7
- Feedback reference
- 800 mV · typical feedback voltage reference · p. 7
- Switches at
- 500 kHz · typical switching frequency, RT = 200 kΩ · p. 7
- Junction to air (DDA (HSOIC))
- 42 K/W · junction-to-ambient thermal resistance, standard board · p. 5
- Junction to board (DDA (HSOIC))
- 23.4 K/W · junction-to-board thermal resistance · p. 6
- Junction to case (DDA (HSOIC))
- 45.8 K/W · junction-to-case top thermal resistance · p. 5
What it is and has
6- Control
- Current mode control · p. 1
- High-side MOSFET
- 92 mΩ · p. 1
- Clock synchronization
- External clock · p. 1
- Undervoltage lockout
- Adjustable voltage and hysteresis · p. 1
- Soft start
- Internal · p. 1
- Current limit
- Cycle-by-cycle · p. 1
Specifications
58| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Input voltage VIN | over operating free-air temperature range | min -0.3 · max 65 V | 5 |
| Input voltage EN | over operating free-air temperature range | min -0.3 · max 8.4 V | 5 |
| Input voltage BOOT | over operating free-air temperature range | max 73 V | 5 |
| Input voltage FB | over operating free-air temperature range | min -0.3 · max 3 V | 5 |
| Input voltage COMP | over operating free-air temperature range | min -0.3 · max 3 V | 5 |
| Input voltage RT/CLK | over operating free-air temperature range | min -0.3 · max 3.6 V | 5 |
| Input voltage BOOT-SW | over operating free-air temperature range | max 8 V | 5 |
| Output voltage SW | over operating free-air temperature range | min -0.6 · max 65 V | 5 |
| Output voltage SW | 10-ns transient | min -2 · max 65 V | 5 |
| Operating junction temperature | min -40 · max 150 °C | 5 | |
| Storage temperature TSTG | min -65 · max 150 °C | 5 | |
| Human Body Model (HBM) ESD Stress Voltage (2) VESD | max 2000 V | 5 | |
| Charged Device Model (HBM) ESD Stress Voltage (3) VESD | max 500 V | 5 | |
| Supply input voltage (1) VIN | Minimum is VO + VDO; see Equation 1 | max 60 V | 5 |
| Output voltage VO | min 0.8 · max 58.8 V | 5 | |
| Output current IO | min 0 · max 3.5 A | 5 | |
| Junction temperature TJ | min -40 · max 150 °C | 5 | |
| Junction-to-ambient thermal resistance (standard board) θJA | DDA (HSOIC), 8 PINS | typ 42 °C/W | 5 |
| Junction-to-top characterization parameter ψJT | DDA (HSOIC), 8 PINS | typ 5.9 °C/W | 5 |
| Junction-to-board characterization parameter ψJB | DDA (HSOIC), 8 PINS | typ 23.4 °C/W | 5 |
| Junction-to-case(top) thermal resistance θJCtop | DDA (HSOIC), 8 PINS | typ 45.8 °C/W | 5 |
| Junction-to-case(bottom) thermal resistance θJCbot | DDA (HSOIC), 8 PINS | typ 3.6 °C/W | 5 |
| Junction-to-board thermal resistance θJB | DDA (HSOIC), 8 PINS | typ 23.4 °C/W | 6 |
| Operating input voltage | TJ = –40°C to 150°C | min 4.5 · max 60 V | 7 |
| Internal undervoltage lockout threshold | Rising | min 4.1 · typ 4.3 · max 4.48 V | 7 |
| Internal undervoltage lockout threshold hysteresis | typ 325 mV | 7 | |
| Shutdown supply current | EN = 0 V, 25°C, 4.5 V ≤ VIN ≤ 60 V | typ 2.25 · max 4.5 uA | 7 |
| Operating: nonswitching supply current | FB = 0.9 V, TA = 25°C | typ 146 · max 175 uA | 7 |
| Enable threshold voltage | No voltage hysteresis, rising and falling | min 1.1 · typ 1.2 · max 1.3 V | 7 |
| Input current | Enable threshold +50 mV | typ -4.6 uA | 7 |
| Input current | Enable threshold –50 mV | min -0.58 · typ -1.2 · max -1.8 uA | 7 |
| Hysteresis current | min -2.2 · typ -3.4 · max -4.5 uA | 7 | |
| Voltage reference | min 0.792 · typ 0.8 · max 0.808 V | 7 | |
| On-resistance | VIN = 12 V, BOOT-SW = 6 V | typ 92 · max 190 mΩ | 7 |
| Input current | ERROR AMPLIFIER | typ 50 nA | 7 |
| Error amplifier transconductance (gM) | –2 uA < ICOMP < 2 uA, VCOMP = 1 V | typ 350 uMhos | 7 |
| Error amplifier transconductance (gM) during soft-start | –2 uA < ICOMP < 2 uA, VCOMP = 1 V, VFB = 0.4 V | typ 77 uMhos | 7 |
| Error amplifier dc gain | VFB = 0.8 V | typ 10000 V/V | 7 |
| Min unity gain bandwidth | typ 2500 kHz | 7 | |
| Error amplifier source/sink | V(COMP) = 1 V, 100 mV overdrive; ±30 uA | typ 30 uA | 7 |
| COMP to SW current transconductance | typ 12 A/V | 7 | |
| Current limit threshold | All VIN and temperatures, Open Loop (1) | min 4.5 · typ 5.5 · max 6.8 A | 7 |
| Current limit threshold | All temperatures, VIN = 12 V, Open Loop (1) | min 4.5 · typ 5.5 · max 6.25 A | 7 |
| Current limit threshold | VIN = 12 V, TA = 25°C, Open Loop (1) | min 5.2 · typ 5.5 · max 5.85 A | 7 |
| Current limit threshold delay | typ 60 ns | 7 | |
| Thermal shutdown | typ 176 °C | 7 | |
| Thermal shutdown hysteresis | typ 12 °C | 7 | |
| Switching frequency range using RT mode fSW | min 100 · max 2500 kHz | 7 | |
| Switching frequency fSW | RT = 200 kΩ | min 450 · typ 500 · max 550 kHz | 7 |
| Switching frequency range using CLK mode fSW | min 160 · max 2300 kHz | 7 | |
| RT/CLK high threshold | typ 1.55 · max 2 V | 7 | |
| RT/CLK low threshold | min 0.5 · typ 1.2 V | 7 | |
| Soft-start time | fSW = 500 kHz, 10% to 90% | typ 2.1 ms | 8 |
| Soft-start time | fSW = 2.5 MHz, 10% to 90% | typ 0.42 ms | 8 |
| Minimum controllable on time | VIN = 12 V, TA = 25°C | typ 135 ns | 8 |
| Minimum CLK input pulse width | typ 15 ns | 8 | |
| RT/CLK falling edge to SW rising edge delay | Measured at 500 kHz with RT resistor in series | typ 55 ns | 8 |
| PLL lock in time | Measured at 500 kHz | typ 78 us | 8 |
Pins, by the datasheet
9- 1 BOOT
- Connect a bootstrap capacitor between BOOT and SW; the output switches off while insufficient bootstrap voltage is refreshed. · p. 4
- 2 VIN
- Input supply voltage with 4.5 V to 60 V operating range. · p. 4
- 3 EN
- Enable with internal pull-up; pull below 1.2 V to disable, float to enable, or use two resistors to adjust input undervoltage lockout. · p. 4
- 4 RT/CLK
- Connect a resistor to ground to set switching frequency or apply an external clock for PLL synchronization; returns to resistor programming when clock edges stop. · p. 4
- 5 FB
- Inverting input of the transconductance (gm) error amplifier. · p. 4
- 6 COMP
- Error amplifier output and PWM current comparator input; connect frequency compensation components. · p. 4
- 7 GND
- Ground. · p. 4
- 8 SW
- Source of the internal high-side power MOSFET and switching node of the converter. · p. 4
- 9 Thermal Pad
- Electrically connect the GND terminal to this exposed pad on the printed circuit board for proper operation. · p. 4
- 2 layers58 × 45 mm

- 4 layers108 × 74 mm

STM32 Drone
bassammorsy/stm32-flight-controller
Custom 4-layer STM32F405RGTx quadcopter flight controller PCB designed in KiCad. Betaflight compatible, 4S–6S LiPo input, SMT assembled by JLCPCB.
104 parts3MIT - 4 layers100 × 100 mm

Pcb AMY
Rivercraft911/R-01_Raster_Laser_Projector
Red, blue and green lasers combine through two dichroc mirrors and bounce off a spinning polygon mirror, which each mirror facet makes one scanline.
159 parts1 - 2 layers119.5 × 60 mm

Futuresight
birbh/FutureSight_CAR
ii. For macos/Linux users: Linux and Mac usually recognize the RNDIS interface automatically, but you need to check if the network interface is active. - Open Terminal: Run ip a (Linux) or ifconfig (Mac).
40 parts - 4 layers230 × 135 mm

Vancontroller
Camperlux/vancontroller
VanController: ESP32-S3 12 V campervan controller board (6 fused relays, 6 PWM dimmers, CAN, RS485, GPS) - KiCad 10 design, manufacturing files and enclosure. Free for non-commercial use.
259 parts - 2 layers128.6 × 91 mm

- 2 layers101.3 × 62.2 mm

- 4 layers100 × 100 mm

Smc power
efebasol/StepperMotorController
Rev A — single-motor bench prototype power board. Feeds the driver board (48 V), the stepper motor brake (24 V) and the logic (5 V / 3V3).
104 parts
Parts like it
3TPS54531DDAR
SOIC-8-EP-40℃~+85℃@(TA) 1 3.5V~28V 570kHz 5A 800mV~26.04V Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS54340DDAR
SOIC-8-EP-40℃~+150℃@(TJ) 1 146uA 2.5MHz 3.5A 4.5V~42V 800mV~41.1V Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS54340DDA
SOP-8-EP-40℃~+150℃@(TJ) 1 146uA 2.5MHz 3.5A 4.5V~42V 800mV~41.1V Adjustable Buck Buck Built-in No SOP-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the TPS54360DDA?
Yes. The symbol is Regulator_Switching:TPS54360DDA and the footprint Package_SO:TI_SO-PowerPAD-8, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS54360DDA?
SOIC-8-EP, with 9 pins. Its footprint is drawn on this page.
Where is the TPS54360DDA datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS54360DDA?
JLCPCB lists it as part C44377, with 55,196 in stock; the sellers' links on this page open their listings.
What can replace the TPS54360DDA?
Parts like it in the library: the TPS54531DDAR by Texas Instruments, the TPS54340DDAR by Texas Instruments and the TPS54340DDA by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the TPS54360DDA?
35 boards in 24 repositories on GitHub; the most starred are listed on this page, with their KiCad files.