

Iium sumo
- Size
- 101.3 × 62.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 50
- Pads
- 201
- Tracks, vias
- 300, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 31 May 2026
- Updated
- 31 May 2026
Overview
Iium sumo is an open-source printed circuit board by edsamv, from the edsamv/iium_sumo_pcb repository on GitHub. It is a 2-layer board of 101.3 × 62.2 mm with 58 parts on 50 nets, routed with 300 tracks and 6 vias.
It is built around the TPS54360DDA. Its parts include 15 capacitors, 9 resistors, 4 diodes, 3 ICs and 3 connectors.
Main components
1Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C5, C6, C7 |
| 4 | 47u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C8, C12, C13 |
| 3 | 3.9k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8, R9 |
| 3 | Conn_01x04 | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Vertical | 5V, J12, J14 |
| 3 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D6, D7, D8 |
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C16, C17 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
| 2 | SW_SPST | custom:push_button | SW1, SW2 |
| 1 | 0.01u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C14 |
| 1 | 0.1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 1500p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10 |
| 1 | 150k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 15uH | Inductor_SMD:L_Sunlord_SWPA6045S | L1 |
| 1 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15 |
| 1 | 43k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 47p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11 |
| 1 | 8.2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | Black Pill v2 | custom:Module_BlackPill_v2 | U4 |
| 1 | Conn_01x02_Pin | custom:Wire Solder Pad | J17 |
| 1 | Conn_01x02_Pin | custom:HANDSON_KF301-2P | J16 |
| 1 | Cytron MD | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | MD |
| 1 | Cytron Start Module | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | Cytron_SM |
| 1 | EXTRA1 | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | J15 |
| 1 | I2C_VL53_1 | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | VL53_1 |
| 1 | I2C_VL53_2 | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | VL53_2 |
| 1 | I2C_VL53_3 | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | VL53_3 |
| 1 | I2C_VL53_4 | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | VL53_4 |
| 1 | I2C_VL53_5 | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | VL53_5 |
| 1 | IR_1 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | IR1 |
| 1 | IR_2 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | IR2 |
| 1 | IR_3 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | IR3 |
| 1 | IR_4 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | IR4 |
| 1 | LM3940 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | LOGO | shooter_foot_library:mmu_logo | G*** |
| 1 | Schottky SS54 | Diode_SMD:D_SMB_Handsoldering | D1 |
| 1 | TPS54360DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U1 |
| 1 | UART1 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | UART1 |
| 1 | UART2 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | UART2 |
The 54 most common of 58 parts.
Similar boards
- 2 layers58 × 45 mm

- 4 layers108 × 74 mm

STM32 Drone
bassammorsy/stm32-flight-controller
Custom 4-layer STM32F405RGTx quadcopter flight controller PCB designed in KiCad. Betaflight compatible, 4S–6S LiPo input, SMT assembled by JLCPCB.
104 parts3MIT - 4 layers100 × 100 mm

Pcb AMY
Rivercraft911/R-01_Raster_Laser_Projector
Red, blue and green lasers combine through two dichroc mirrors and bounce off a spinning polygon mirror, which each mirror facet makes one scanline.
159 parts1 - 2 layers119.5 × 60 mm

Futuresight
birbh/FutureSight_CAR
ii. For macos/Linux users: Linux and Mac usually recognize the RNDIS interface automatically, but you need to check if the network interface is active. - Open Terminal: Run ip a (Linux) or ifconfig (Mac).
40 parts - 4 layers230 × 135 mm

Vancontroller
Camperlux/vancontroller
VanController: ESP32-S3 12 V campervan controller board (6 fused relays, 6 PWM dimmers, CAN, RS485, GPS) - KiCad 10 design, manufacturing files and enclosure. Free for non-commercial use.
259 parts - 2 layers128.6 × 91 mm

- 4 layers100 × 100 mm

Smc power
efebasol/StepperMotorController
Rev A — single-motor bench prototype power board. Feeds the driver board (48 V), the stepper motor brake (24 V) and the logic (5 V / 3V3).
104 parts - 2 layers58 × 58 mm

Ups lead acid electgpl v1.0
electgpl/MiniUPS12VLead-Acid
This project implements a mini uninterruptible power supply (UPS) designed for 12V Lead-Acid AGM/GEL batteries. It integrates a dedicated CN3767 lead-acid charger, a PMOS + Schottky bypass circuit, a TPS54360 buck…
78 parts
Questions
How big is the Iium sumo PCB?
It measures 101.3 × 62.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Iium sumo use?
58 parts, built around the TPS54360DDA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Iium sumo KiCad files?
From the edsamv/iium_sumo_pcb repository on GitHub, at the commit this page was made from: the board is iium_sumo_pcb-main/iium_sumo.kicad_pcb and its schematic iium_sumo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Iium sumo design in my own project?
Its repository states no licence, so its author keeps all rights: ask edsamv before reusing the design.