

Futuresight
ii. For macos/Linux users: Linux and Mac usually recognize the RNDIS interface automatically, but you need to check if the network interface is active. - Open Terminal: Run ip a (Linux) or ifconfig (Mac).
- Size
- 119.5 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 72
- Pads
- 160
- Tracks, vias
- 355, 41
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 18 Sep 2026
- Updated
- 2 Oct 2026
Overview
Futuresight is an open-source printed circuit board by birbh, from the birbh/FutureSight_CAR repository on GitHub. It is a 2-layer board of 119.5 × 60 mm with 40 parts on 72 nets, routed with 355 tracks and 41 vias.
It is built around the TPS54360DDA, AO3401A and MPU-6050, with the SMBJ24A among its other parts. Its parts include 3 connectors, 2 resistors, 2 diodes, 1 IC and 1 transistor.
Main components
4TPS54360DDA
SOIC-8-EP-40℃~+150℃@(TJ) 1 146uA 2.5MHz 3.5A 4.5V~60V 800mV~58.8V Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsMPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometersSMBJ24A
DO-214AA(SMB)-55℃~+150℃ 15.4A 24V 26.7V 38.9V 5uA 600W TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)
README
README.mdFutureSight_CAR:
FutureSight is an automotive dashcam built from scratch from Milk-V Duo S. It features hardware accelerated 1680p continuous loop recording with an 12c G-sensor for auto crash detection. Also I have prepared a custom 12 volt to 5 volt power converting board to handle the non sturdy vehicle(car) power.
What makes it unique??
Unlike the commercial dashcams that lock footage behind their own apps. This project gives a person complete access and ownership of hardware and software stack. It runs a raw python on RISC-V Linux env. The hardware stack si built for extreme durability, utilizing a TPS54360DDA bulk converter and a 5.5V 4.0F supercapacitor for safe shutdown and giving time to save files before car switches off. Also it is designed to manage heat efficiently by using the large heat sync in the back panel and go-pro style mounting hinge so that it can be rotated to any angle.
Why i made it?
Recently my father's car got into an accident and he paid the damaged repairing cost although it wasn't his fault. So from that day i thought it would be cool if we get a dashcam(a good one). But after seeing the dashcams online the good ones were so expensive. So i thought why not make my own dashcam in home. Also i thought driving a car in those busy and chaotic roads of Kathmandu would be easier and feel confident because everything you and other person do is fully recorded and also helps us to be in discipline cause we think that this all is being recorded and we are bound to laws.
How to use it?
-
Mount+wire: Attach the dashcam module(assembled) to your car windshield using gopro compatible mount provided in 3d files of repo. Then wire 2 pin screw terminal on pcb directly to 12V power source in your car sing a cigarette lighter adapter for car.
-
Starting dashcam: Turn on your car. Then the system boots automatically and providing power to Milk-v-duo S. Then a background service immediately starts recording a video in 3 min. chunks.
-
Storage management: When the microsd card fills up, the software automatically deletes oldest normal driving footage.
-
Smart impact protection: If the MPU-6050 accelerometer chip detects a sudden G-force spike(triggered by eg:: hard braking, collision, car slipping etc.) , then the current video is instantly locked into
/events/folder in sd card where it can't be overwritten. Otherwise if you press a button in the back of the dashcam it will be auto saved to/events/folder. Other normal recordings are saved to/normalfolder.
Assembly Instructions:
3d print enclosure:
All te 3d CAD files are provided in CAD folder of this repo. And especially 3d printable parts can be found on /CAD/3d print/ folder in this repo. Use a high tempetrature resistant filament profile like ABS or ASA. Don't use PLA or PETG as they are not so resistant to heat and can melt on car interior temp. as it easily reaches about 70-80 °C in summer season. Also all the mounts have been pre defined in the CAD so there is no need to worry for screw fitting.
PCB and soldering:
Fabricate the custom matte black Kicad Pcb. Solder the SMD components first paying special attention to all components. Also before pcb printing check the 12v-5v power lines are of 1-1.5 mm width. Then solder the all the required parts to their respective footprints and places. Also snap the Milk-v-Duo S to its respective place J1 And J2 same as shown in 3d CAD model. Please ensure all the pins are arranged with the pcb otherwise it will not function. Also note that the upper black thing is completely optional because they are just pin headers that are add in 3d model.
Mounting:
I have provided each and every screw slots in the 3d model so that each component easily fits into the enclosure. Also dont forget to connect the camera to the milk-v duo s connector cause without camera the system is nothing. To mount camera you must take the lid side and mount the screws into it s that camera stays fit in it.
Flashing firmware:
Flash the official MIlk-V OS image into your SDcard. Then connect them via onboard micro sd adapter and install the required dependencies(ffmpeg,python3,py3-smbus2). Create /mnt/sdcard/dashcam/normal/ and /mnt/sdcard/dashcam/events/ folder/directories inside the sd card. Drop the firmware files in the root folder and enable it as a startup service.
Getting the data:
For now you can extract your dashcam videos by unplugging the Sd-card from the dashcam and plugging it in the sd card reader in pc,mobile or any other mountable device. And also you can directly connect your milk v type c port into your pc and access your data. But in future i plan to make a native app for the dashcam and use the inbuilt wifi antenna thing to sync the data. Also i plan to make the app fully run locally in users’ devices, protecting the privacy of the user.
Milk-V Duo S setup(in detail):
Once your Pcb is soldered and milk-v duo-s is mounted, follow these steps to configure dashcam:::
- Flash the OS:
- Download the official Milk-V Duo S Linux image from milk v Github repo
- then flash the image to a micros card using tools like Rufus or balenaEtcher or any other image flashing software.
- insert the micro sd card into duo s and power it using the USB-C port(note: don't apply the car 12V power yet.)
- Install the required drivers:
i. For Windows users:
Windows often fails to recognize the board automatically. You need to tell it to treat the USB connection as a network card.
- Open Device Manager: Look under Other devices for an unknown device (often labeled Serial or RNDIS).
- Update Driver: Right-click it, select Update driver, and choose Browse my computer for drivers.
- Select from List: Click Let me pick from a list of available drivers on my computer.
- Choose Network Adapters: Select Network adapters from the list, choose Microsoft as the manufacturer, and select Remote NDIS Compatible Device (or USB RNDIS Adapter).
- Finish: Click Next and ignore any warning prompts.
ii. For macos/Linux users: Linux and Mac usually recognize the RNDIS interface automatically, but you need to check if the network interface is active. - Open Terminal: Run ip a (Linux) or ifconfig (Mac). - Look for a new interface: You should see a new network interface (usually named something like usb0 or enX).
- Setup SSH into the board:
- Connect the Milk-V Duo S into your computer after installing required drivers.It will mount as a virtual network adapter(RNDIS).
- Open your terminal and SSH into your default IP adress
192.168.42.1. -
bash ssh root@192.168.42.1 - the default password is typically
milkv
- Install dependencies: Depending on specific os image you flashed, use the system package manager to install reqd video and python packages:
-
bash apt-get update sudo apt install ffmpeg sudo apt install python3 python3-pip pip3 install smbus2
- Create the required storage directories:
-
bash mkdir -p/mnt/sdcard/dashcam/normal/ mkdir -p/mnt/sdcard/dashcam/events/
- Transfer the python script(firmware): From your computer use SCP(secure copy) protocol to transfer your finalized firmware firmware.py script into root folder of Milk-V Duo S:
scp firmware.py root@192.168.42.1:/root/- Create auto-start service when boot:
The dashcam must boot on its own when car turns on. So use systemd to make script aut run in the bg:
- Create the service file:
bash vi /etc/systemd/system/dashcam.service- Paste the exact configuration into the file:
bash [Unit] Description=Dashcam Auto recors svc After=systemd-modules-load.service [Service] Type=simple ExecStart=/usr/bin/python3 /root/firmware.py Restart=always RestartSec=3 [Install] WantedBy=multi-user.target
- Save the file and exit.
- Enable and test:
- Enable the service so it starts automatically on every boot.Also start manually to test it now:
bash systemctl enable dashcam.service systemctl start dashcam.service - Verify that the camera is recording and G-sensor is polling by checking the status:
bash systemctl status dashcam.service - Now at this point the usb-c cable can be disconnected and your dashcam is ready to be mounted inside the car Cigarette Lighter 12V port.... YAYYYYYY!!! les goooooooo!!
Future changes:
I have kept the ipex connector cable with wifi+bluetooth antenna in the pcb,BOM and CAD but that is completely optional for now as the app and the wifi setup hasnt been added in the firmware yet. In future it will be added. Also the app for the dashcam isnt functional yet and will be updated in future.
Assets:
CAD screenshots:
CAD link:
PCB screenshots:
Schematic:
-
Power Control:
-
Safe shut
-
Duos_interface:
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R_COMP1, R_GATE1, R_SENSE1, R_SENSE2 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 22µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C_OUT1, C_OUT2 |
| 2 | 4.7kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R_I2C1, R_I2C2 |
| 2 | 40V 3A | Diode_SMD:D_SMC_Handsoldering | D_BACKUP1, D_MAIN1 |
| 2 | Conn_02x13_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x13_P2.54mm_Vertical | J1, J2 |
| 1 | 0.1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C_BOOT1 |
| 1 | 0.1µF 10V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C_MPU1 |
| 1 | 10.2kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 10µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C_IN1 |
| 1 | 10Ω 1W | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R_CHARGE1 |
| 1 | 15µH | Inductor_SMD:L_Bourns-SRN8040_8x8.15mm | L1 |
| 1 | 162kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R_RT1 |
| 1 | 3.3nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C_COMP1 |
| 1 | 330Ω | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R_LED1 |
| 1 | 40V 3A | Diode_SMD:D_SMA_Handsoldering | D2 |
| 1 | 47µF | Capacitor_SMD:CP_Elec_6.3x5.8 | C_IN2 |
| 1 | 5.5V 4.0F | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C_SUPER1 |
| 1 | 53.6kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | LED_Small | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D_STAT1 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U_MPU1 |
| 1 | Polyfuse | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | SMBJ24A | SMBJ24A:DIOM4336X265N | D1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1 |
| 1 | TPS54360DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U1 |
Similar boards
- 4 layers100 × 90 mm

- 2 layers89.2 × 103.5 mm

Oas
hubertciebiada/open-ambient-sensor
OAS — Open Ambient Sensor: DIY multi-sensor indoor environmental monitor (CO2, PM, VOC/NOx, temperature/humidity, mmWave presence) on ESP32-C6 with ESPHome / Home Assistant integration
64 parts44GPL-3.0 - 4 layers130 × 105 mm

HomeDeck
Kilan777/HomeDeck
Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)
228 parts1 - 2 layers100 × 60 mm

Power
etiennechlt/electronic-chess
Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.
82 parts - 2 layers50 × 66 mm

- 2 layers151.3 × 122.6 mm

Remote v2
KIIT-Robotic-Society/Dharma_RoboFest4.0
Dharma Bot is a quadruped robotic dog featuring 12-DOF locomotion, real-time sensing, and a modular subsystem design.
135 parts4MIT - 4 layers62.2 × 54.6 mm

Flight ControllerV1.0
alihaanc/SKYKILLER-Development-Board
Drone and Rocket Development PCB board
59 parts2 - 2 layers40 × 40 mm

Esp32Drone
HexaBitsEdu/ESP32-MiniDrone
this project is a drone based on esp32 microcontroller and coreless DC motor
83 parts2
Questions
How big is the Futuresight PCB?
It measures 119.5 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Futuresight use?
40 parts, built around the TPS54360DDA, AO3401A, MPU-6050 and SMBJ24A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Futuresight KiCad files?
From the birbh/FutureSight_CAR repository on GitHub, at the commit this page was made from: the board is futuresight-pcb/futuresight.kicad_pcb and its schematic futuresight-pcb/duos_interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Futuresight design in my own project?
Its repository states no licence, so its author keeps all rights: ask birbh before reusing the design.