Skip to the content
123456789999

TPS54340DDA

Texas InstrumentsExtended

-40℃~+150℃@(TJ) 1 146uA 2.5MHz 3.5A 4.5V~42V 800mV~41.1V Adjustable Buck Buck Built-in No SOP-8-EP DC-DC Converters ROHS

Part id
ti/TPS54340DDA
Category
DC DC Converters
Package
SOP-8-EP
Pins
9
In stock
27 at JLCPCB (C544936)
Used on
6 open-source boards

Overview

The TPS54340DDA is a DC DC Converter made by Texas Instruments in a SOP-8-EP package with 9 pins. -40℃~+150℃@(TJ) 1 146uA 2.5MHz 3.5A 4.5V~42V 800mV~41.1V Adjustable Buck Buck Built-in No SOP-8-EP DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS54340DDA, from KiCad's library) and its footprint (Package_SO:TI_SO-PowerPAD-8, from KiCad's library), ready for a KiCad board. 27 are in stock at JLCPCB (part C544936). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

1BOOT2VIN3EN4RT/CLK5FB6COMP7GND8SW9GNDPAD
Regulator_Switching:TPS54340DDAFrom KiCad's library

Footprint

123456789999
Package_SO:TI_SO-PowerPAD-8From KiCad's library

Pinout

9
The pins of the TPS54340DDA
PinNameType
1BOOTInput
2VINPower in
3ENInput
4RT/CLKInput
5FBInput
6COMPPassive
7GNDPower in
8SWOutput
9GNDPADPower in

Open-source boards using it

6
  • 2 layers99.5 × 90.5 mmMRR ESPA, the printed circuit board in 3D

    MRR ESPA

    maplerainresearch/MRR_ESPA

    A basic 3D printer control board based on ESP32

    130 parts59
  • 4 layers65 × 56 mmHedgehog, the printed circuit board in 3D

    Hedgehog

    PRIArobotics/Hedgehog_PCB

    144 parts2AGPL-3.0
  • 2 layers26 × 15.9 mmTPS54340 Buck Regulator, the printed circuit board in 3D

    TPS54340 Buck Regulator

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    20 parts1.2k
  • 2 layers99.5 × 90.5 mmMRR ESPA, the printed circuit board in 3D

    MRR ESPA

    maplerainresearch/MRR_ESPA

    A basic 3D printer control board based on ESP32

    129 parts59
  • 2 layers99.5 × 99.5 mmMRR ESPE, the printed circuit board in 3D

    MRR ESPE

    maplerainresearch/MRR_ESPE

    MRR ESPE 3D printer control board

    139 parts39
  • 10 layers125.7 × 140.3 mmMainboardTEST, the printed circuit board in 3D

    MainboardTEST

    annegautham/IEEE_TechnicalProgram_2026

    191 parts2

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the TPS54340DDA?

Yes. The symbol is Regulator_Switching:TPS54340DDA and the footprint Package_SO:TI_SO-PowerPAD-8, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS54340DDA?

SOP-8-EP, with 9 pins. Its footprint is drawn on this page.

Where is the TPS54340DDA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS54340DDA?

JLCPCB lists it as part C544936, with 27 in stock; the sellers' links on this page open their listings.

What can replace the TPS54340DDA?

Parts like it in the library: the TPS54360DDA by Texas Instruments, the TPS54531DDAR by Texas Instruments and the TPS54340DDAR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS54340DDA?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.