

Robot design competition
Includes PCB design , schematic , photos and videos of robot running
- Size
- 100 × 100.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 124
- Nets
- 97
- Pads
- 387
- Tracks, vias
- 687, 58
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Feb 2026
- Updated
- 26 Feb 2026
Overview
Robot design competition is an open-source printed circuit board by JCY2515, from the JCY2515/robot-design-competition repository on GitHub. It is a 2-layer board of 100 × 100.1 mm with 124 parts on 97 nets, routed with 687 tracks and 58 vias.
It is built around the TPS54360DDA, TJA1050 and LM1117-3.3V, with the CJ2310 and SS54 among its other parts. Its parts include 36 resistors, 26 capacitors, 8 diodes, 8 transistors and 5 ICs. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
5TPS54360DDA
SOIC-8-EP-40℃~+150℃@(TJ) 1 146uA 2.5MHz 3.5A 4.5V~60V 800mV~58.8V Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTJA1050
SOIC-8SOIC-8 New Arrivals ROHSPhilips SemiconsUncategorisedLM1117-3.3V
SOT-89SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedCJ2310
SOT-23-3-40℃~+150℃ 1 N-channel 125mΩ@4.5V 19.5pF 247pF 350mW 3A 500mV 60V 6nC@10V SOT-23 MOSFETs ROHSJiangsu Changjing Electronics Technology (CJ)MOSFETsSS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdrobot-design-competition
Includes PCB design , schematic , photos and videos of robot running
Parts
124| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | Conn_01x04 | HKUST_RDC2025_Footprint_Lib:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | CAN1, CAN1_1, CAN2, CAN2_1, PA0_1, PB1PA1, PB8_1, PB10_1, PB14_1, PC0_1, PC2_1, PC6_1, PC8_1, PC10PA1, PC11_1, PC14_1 +2 |
| 11 | 100nF | HKUST_RDC2025_Footprint_Lib:C_0603_1608Metric | C5, C6, C8, C9, C10, C11, C12, C13, C14, C15, C22 |
| 10 | 10k | HKUST_RDC2025_Footprint_Lib:R_0603_1608Metric | R1, R2, R5, R6, R7, R10, R11, R13, R21, R23 |
| 8 | 120R | HKUST_RDC2025_Footprint_Lib:R_0603_1608Metric | R3, R4, R8, R9, R12, R14, R22, R24 |
| 8 | CJ2310 | HKUST_RDC2025_Footprint_Lib:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | Pneumatic | HKUST_RDC2025_Footprint_Lib:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | Pneumatic1, Pneumatic2, Pneumatic3, Pneumatic4, Pneumatic5, Pneumatic6, Pneumatic7, Pneumatic8 |
| 5 | 1.5k | HKUST_RDC2025_Footprint_Lib:R_0603_1608Metric | R30, R31, R32, R33, R35 |
| 5 | 2.2uF | HKUST_RDC2025_Footprint_Lib:C_0603_1608Metric | C1, C4, C7, C18, C19 |
| 4 | 0R | HKUST_RDC2025_Footprint_Lib:R_0603_1608Metric | R15, R20, R26, R29 |
| 4 | 39pF | HKUST_RDC2025_Footprint_Lib:C_0603_1608Metric | C16, C17, C23, C24 |
| 4 | 56R | HKUST_RDC2025_Footprint_Lib:R_0603_1608Metric | R16, R17, R18, R19 |
| 4 | MountingHole | HKUST_RDC2025_Footprint_Lib:MountingHole_3.2mm_M3 | H1, H2, H4, H5 |
| 2 | 10uF | HKUST_RDC2025_Footprint_Lib:C_0603_1608Metric | C20, C21 |
| 2 | 20pF | HKUST_RDC2025_Footprint_Lib:C_0603_1608Metric | C2, C3 |
| 2 | TFT | HKUST_RDC2025_Footprint_Lib:MountingHole_2.7mm_M2.5 | H3, H6 |
| 2 | TJA1050 | HKUST_RDC2025_Footprint_Lib:SOIC-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 1 | 10.2K | HKUST_RDC2025_Footprint_Lib:R_0603_1608Metric | R28 |
| 1 | 12V | HKUST_RDC2025_Footprint_Lib:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | 162k | HKUST_RDC2025_Footprint_Lib:R_0603_1608Metric | R25 |
| 1 | 1k | HKUST_RDC2025_Footprint_Lib:R_0603_1608Metric | R34 |
| 1 | 1mF | HKUST_RDC2025_Footprint_Lib:CP_Radial_D8.0mm_P12.00mm | C25 |
| 1 | 22uH | HKUST_RDC2025_Footprint_Lib:L_7.3x7.3_H3.5 | L1 |
| 1 | 24V | HKUST_RDC2025_Footprint_Lib:AMASS_XT60-M_1x02_P7.20mm_Vertical | J2 |
| 1 | 2k | HKUST_RDC2025_Footprint_Lib:R_0603_1608Metric | R36 |
| 1 | 3.3V | HKUST_RDC2025_Footprint_Lib:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | 50V 100uF | HKUST_RDC2025_Footprint_Lib:CP_Radial_D8.0mm_P12.00mm | C26 |
| 1 | 53.6k | HKUST_RDC2025_Footprint_Lib:R_0603_1608Metric | R27 |
| 1 | 5V | HKUST_RDC2025_Footprint_Lib:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | 8MHz | HKUST_RDC2025_Footprint_Lib:Crystal_HC49-4H_Vertical | Y1 |
| 1 | But1 | HKUST_RDC2025_Footprint_Lib:SW_Push | SW1 |
| 1 | But2 | HKUST_RDC2025_Footprint_Lib:SW_Push | SW2 |
| 1 | Fuse_Small | HKUST_RDC2025_Footprint_Lib:Fuse_Blade_ATO_directSolder | F1 |
| 1 | LED1 | HKUST_RDC2025_Footprint_Lib:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | LED2 | HKUST_RDC2025_Footprint_Lib:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6 |
| 1 | LED3 | HKUST_RDC2025_Footprint_Lib:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7 |
| 1 | LED4 | HKUST_RDC2025_Footprint_Lib:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8 |
| 1 | LM1117-3.3V | HKUST_RDC2025_Footprint_Lib:SOT-223 | U4 |
| 1 | RST | HKUST_RDC2025_Footprint_Lib:SW_Push | RST1 |
| 1 | SS54 | HKUST_RDC2025_Footprint_Lib:D_SMA | D1 |
| 1 | STM32F405RGTx | HKUST_RDC2025_Footprint_Lib:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SWD | HKUST_RDC2025_Footprint_Lib:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | SWD1 |
| 1 | TFT | HKUST_RDC2025_Footprint_Lib:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | TPS54360DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U5 |
Similar boards
- 2 layers67.9 × 98 mm

- 4 layers76.9 × 70.3 mm

STC mainboard
wargod1029/PCB-design
Brief - Dual brushed motor driver board using BTS7960b half bridge IC. Designed for large power motor (24V, 15A)
175 parts - 4 layers230 × 135 mm

Vancontroller
Camperlux/vancontroller
VanController: ESP32-S3 12 V campervan controller board (6 fused relays, 6 PWM dimmers, CAN, RS485, GPS) - KiCad 10 design, manufacturing files and enclosure. Free for non-commercial use.
259 parts - 2 layers58 × 58 mm

Ups lead acid electgpl v1.0
electgpl/MiniUPS12VLead-Acid
This project implements a mini uninterruptible power supply (UPS) designed for 12V Lead-Acid AGM/GEL batteries. It integrates a dedicated CN3767 lead-acid charger, a PMOS + Schottky bypass circuit, a TPS54360 buck…
78 parts - 2 layers85 × 85 mm

- 2 layers176.3 × 117.2 mm

Soldered Inkplate 7
SolderedElectronics/Soldered-Inkplate-7-hardware-design
Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-7 designed by Soldered Electronics.
269 parts - 2 layers131.4 × 105.5 mm

Soldered Inkplate 6COLOR
SolderedElectronics/Soldered-Inkplate-6-COLOR-hardware-design
Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-6-COLOR designed by Soldered Electronics.
265 parts3 - 2 layers55 × 15 mm

Questions
How big is the Robot design competition PCB?
It measures 100 × 100.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Robot design competition use?
124 parts, built around the TPS54360DDA, TJA1050, LM1117-3.3V and CJ2310. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Robot design competition KiCad files?
From the JCY2515/robot-design-competition repository on GitHub, at the commit this page was made from: the board is hardware/PCB.kicad_pcb and its schematic hardware/schmatics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Robot design competition design in my own project?
Its repository states no licence, so its author keeps all rights: ask JCY2515 before reusing the design.