4 layers39 × 39 mm
OneInchEye
will127534/OneInchEye
A One Inch CMOS sensor (IMX283) camera board designed for Raspberry Pi
94 parts355MIT
Boards using the TMP117AIDRVR
41 boardsBoards in 28 GitHub repositories, designed in KiCad, that use the TMP117AIDRVR by Texas Instruments (-55℃~+150℃ 1.7V~5.5V 15.5ms 16bit 3.1uA Factory temperature calibration、Temperature threshold monitoring、Low-power standby、On-chip non-volatile parameter storage、On-chip digital filtering/averaging I2C、SMBus ±0.1℃ WDFN-6-EP(2x2) Temperature Sensors ROHS). See how each wires it, with its parts, size, README and files; the TMP117AIDRVR’s symbol, footprint and pinout are on its own page.
- 4 layers121 × 87.9 mm
- 4 layers39 × 39 mm
ShutterEye
will127534/ShutterEye
A simple camera board using SC910GS 1" 4K@30fps global shutter sensor
157 parts26MIT - 4 layers60 × 40 mm
Ftx
SETIatHCRO/Front-Page
Documentation related to the Allen Telescope Array at the Hat Creek Radio Observatory Wiki Link Below
153 parts5 - 4 layers44.5 × 50.6 mm
- 2 layers56 × 6.2 mm
- 2 layers228.9 × 5.5 mm
TMP117 section 5cm
BerkeleyLab/DxP-sensor-probes
Hardware design for the DxP (Distributed sensor Profiling) sensor probe.
38 parts1 - 4 layers62.9 × 42.5 mm
PCB Design PFE
khawlahhouki/fatigue-detection-edge-ai
Real-time physical fatigue detection using Edge AI on STM32H7 with FreeRTOS, biosignal acquisition (PPG, EMG, IMU) and TFLite INT8 inference
64 parts1 - 6 layers211 × 192.7 mm
- 2 layers28 × 11 mm
Temperature Sensor I2C
ABlairJamieson/Temperature_Sensor_I2C
Small TMP117 temperature-sensor board for the custom Radxa CM5 camera carrier. The intended use is remote temperature monitoring, including the camera FPGA area.
10 parts - 2 layers85.7 × 65.9 mm
- 4 layers46.5 × 67.8 mm
Loggerhw v5.0
BerkeleyLab/DxP-data-logger
Hardware design for the DxP (Distributed sensor Profiling) data logger that connects to a DxP sensor probe.
62 parts - 2 layers28 × 18 mm
Final project
Casasaviruz/Wearable-biosensor-PCB
A battery powered double sided PCB sensor meant to monitor the heart rate, breathing, temperature and sleep and active cycles of lab mice, made as small and non invasive as possible, data is transmitted through Bluetooth
37 parts - 2 layers45 × 45 mm
Watch
DINDIN2007/Blystwatch
This is a demo board to showcase development with both the BlystL15 (based on the nrf54L15) and the IOComposer AI from I-Syst.inc.
47 parts - 4 layers60 × 40 mm
- 4 layers50 × 16 mm
Pmeter
Guiimartinho/bike-powermeter
Medidor de potência para bicicleta, aberto do extensômetro ao pod: torque por ponte de classe transdutor no braço do pedivela, BLE Cycling Power e ANT+ Bicycle Power. Firmware Zephyr, placa e case gerados por programa.
59 parts - 4 layers140 × 120 mm
PianoMatrice
manvalan/MuonScope
Piano di rivelazione MuonScope con 16 fotodiodi VBPW34S in matrice 4×4 a passo 10 mm, per il bus MIKILAB REV5.1.
490 parts - 2 layers48.3 × 48.3 mm
- 2 layers174 × 88 mm
SiPM Characterisation RevD Mount10
prat4002/PCB-for-SiPM-characterisation
Silicon photomultipliers (SiPMs) require a stable reverse-bias voltage and a low-noise signal interface for meaningful characterization.
65 parts - 4 layers40 × 38 mm
Compact Bluetooth Wearable clean
xmyoot/compact-bluetooth-wearable
Compact 4-layer circular Bluetooth Low Energy wearable device
50 parts - 4 layers31.4 × 31 mm
Esp32c6 ble sensor
xmyoot/esp32c6-ble-sensor-coin-cell
Ultra-compact 4-layer circular BLE sensor pod with ESP32-C6, CR2032 coin-cell power and environmental sensors
71 parts - 2 layers66.8 × 6 mm
NadiSense ring v2 revB
yeswantsakthi-hub/NadiSense
NadiSense smart ring for overnight pulse-based screening. Vishwakarma Awards 2026-27 (VK26-AU-FD-0015): CAD, FEA, KiCad schematic, power budget.
49 parts - 4 layers64.6 × 44 mm
CM4Card
will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4
58 parts96MIT - 4 layers18.6 × 43.1 mm
