4 layers60 × 90 mm
2 layers48.3 × 48.3 mm
Projet IOT Olanda
marie13131313/PCB- Size
- 48.3 × 48.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 61
- Pads
- 129
- Tracks, vias
- 198, 26
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Oct 2023
- Updated
- 25 Oct 2023
Overview
Projet IOT Olanda is an open-source printed circuit board by marie13131313, from the marie13131313/PCB repository on GitHub. It is a 2-layer board of 48.3 × 48.3 mm with 24 parts on 61 nets, routed with 198 tracks and 26 vias.
It is built around the ESP32-S3-WROOM-1-N8R8, TMP117AIDRVR and USB4110-GF-A. Its parts include 11 capacitors, 7 resistors, 4 ICs, 1 diode and 1 connector. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
Main components
3
ESP32-S3-WROOM-1-N8R8
SMD,25.5x18mm-104.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3R8 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
TMP117AIDRVR
WDFN-6-EP(2x2)-55℃~+150℃ 1.7V~5.5V 15.5ms 16bit 3.1uA Factory temperature calibration、Temperature threshold monitoring、Low-power standby、On-chip non-volatile parameter storage、On-chip digital filtering/averaging I2C、SMBus ±0.1℃ WDFN-6-EP(2x2) Temperature Sensors ROHSTexas InstrumentsTemperature Sensors
USB4110-GF-A
SMD-40℃~+85℃ 1 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdPCB
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C7, C8 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2, C6 |
| 2 | 5k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric | C9, C11 |
| 2 | R | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 4k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | AP7365-39YG-13 | Library:AP736539YG13 | IC2 |
| 1 | ESP32-S3-WROOM-1-N8R8 | Library:ESP32S3WROOM1N8R8 | IC1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | MCP73831T-2DCI_MC | Library:SON50P300X200X100-9N-D | IC4 |
| 1 | TMP117AIDRVR | Library:SON65P200X200X80-7N | IC3 |
| 1 | USB4110-GF-A | Library:USB4110GFA | J1 |
Similar boards
- 4 layers39 × 39 mm
OneInchEye
will127534/OneInchEye
A One Inch CMOS sensor (IMX283) camera board designed for Raspberry Pi
94 parts355MIT - 4 layers121 × 87.9 mm
- 4 layers39 × 39 mm
ShutterEye
will127534/ShutterEye
A simple camera board using SC910GS 1" 4K@30fps global shutter sensor
157 parts26MIT - 4 layers60 × 40 mm
Ftx
SETIatHCRO/Front-Page
Documentation related to the Allen Telescope Array at the Hat Creek Radio Observatory Wiki Link Below
153 parts5 - 4 layers44.5 × 50.6 mm
- 2 layers56 × 6.2 mm
- 2 layers228.9 × 5.5 mm
TMP117 section 5cm
BerkeleyLab/DxP-sensor-probes
Hardware design for the DxP (Distributed sensor Profiling) sensor probe.
38 parts1
Questions
How big is the Projet IOT Olanda PCB?
It measures 48.3 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Projet IOT Olanda use?
24 parts, built around the ESP32-S3-WROOM-1-N8R8, TMP117AIDRVR and USB4110-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Projet IOT Olanda KiCad files?
From the marie13131313/PCB repository on GitHub, at the commit this page was made from: the board is Projet_IOT_Olanda.kicad_pcb and its schematic Projet_IOT_Olanda.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Projet IOT Olanda design in my own project?
Its repository states no licence, so its author keeps all rights: ask marie13131313 before reusing the design.