4 layers431.5 × 125.5 mm
Clavier
lsartory/Clavier
An FPGA-based mechanical keyboard with an integrated USB hub and communication interfaces
344 parts212
Boards using the TLV62569DBVR-TP
63 boardsBoards in 52 GitHub repositories, designed in KiCad, that use the TLV62569DBVR-TP by TECH PUBLIC (1 1.5MHz 2.7V~5.5V 2A 40uA Adjustable Buck Built-in No SOT-23-5 DC-DC Converters ROHS). See how each wires it, with its parts, size, README and files; the TLV62569DBVR-TP’s symbol, footprint and pinout are on its own page.
- 2 layers35 × 45 mm
Aether
EnriqueNeyra/aether
All-in-one home air quality monitor measuring Temp, Humidity, CO2, VOCs, Particulate Matter, and NOx. Powered by ESP32-C3 running esphome, and built with Home Assistant integration
57 parts129 - 6 layers112 × 98 mm
- 6 layers100 × 120 mm
Astra piNas
jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
176 parts30 - 6 layers39.5 × 39.5 mm
P4eregrine
anticitizn/p4eregrine
All-in-one ESP32 P4-based drone ESC, flight controller, and video processor
359 parts21 - 4 layers100 × 80 mm
- 4 layers60 × 51 mm
- 6 layers113 × 99 mm
- 2 layers57.5 × 72 mm
ESP32-Based Sensor PCB
blazjerman/ESP32-Based-Sensor-PCB
For updates or additional library formats, visit SnapEDA.
77 parts4MIT - 4 layers50 × 70 mm
- 4 layers71.7 × 62.4 mm
- 4 layers35 × 99.9 mm
Snips controller
thePunderWoman/SnipsControllers
The controllers built to work with Amidala
95 parts3GPL-2.0 - 4 layers97.6 × 74.8 mm
Project byte hamr
robertrico/project_byte_hamr
Open source expansion platform for Apple IIe prototyping and development
93 parts2 - 4 layers110 × 80 mm
Esp32p4 extreme
Andreuxxx1977/esp32-p4
An open-hardware, actively cooled ESP32-P4 board for heavy multimedia work: a 2-lane MIPI camera, a 2-lane MIPI display, USB 2.0 High-Speed, 10/100 Ethernet, UHS-I microSD, 32 MB flash and 32 MB PSRAM.
234 parts1CERN-OHL-P-2.0 - 4 layers55.7 × 72.2 mm
- 2 layers72 × 121 mm
Teebeutel
entropia/Teebeutel-Hardware
Teebeutel (eng. Teabag) is an electronic, Entropia themed con-badge for the GPN20, featuring an ESP32 microprocessor running micropython.
201 parts1 - 6 layers101.8 × 80.5 mm
- 4 layers45 × 34.8 mm
- 4 layers100 × 64 mm
S6la8
OutBlade/s6la8
Open-source 8-channel logic analyzer: FX2LP + Spartan-6, with a sigrok driver. Design in progress, not yet built or tested.
155 parts1 - 4 layers99.1 × 88.9 mm
- 4 layers100 × 70 mm
SEM
Serhio4522/SEM_hitachi-
Digitization of a Hitachi scanning electron microscope (SEM) — hardware design, FPGA firmware, and analog frontend schematics.
288 parts1 - 2 layers71 × 41 mm
Dc supply
Alexgichamba/lipo-based-power-supply
Battery charger and battery protection PCB with 5V and 3V3 output rails for 1S LiPo battery
45 partsMIT - 2 layers85 × 45 mm
- 4 layers50 × 40 mm
TokenKey RT
anand2532/TokenKey-RT
The whole KiCad project for the TokenKey RT board lives here: TokenKey-RT.kicadpro, TokenKey-RT.kicadsch (plus sub-sheets), the 4-layer TokenKey-RT.kicadpcb and TokenKey-RT.kicaddru.
103 parts