

Teebeutel
Teebeutel (eng. Teabag) is an electronic, Entropia themed con-badge for the GPN20, featuring an ESP32 microprocessor running micropython. You can tinker with its various sensors, build your own custom expansions, render beautiful animations on the 128x128px oled or simply enjoy it as the colourful badge it is.
- Size
- 72 × 121 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 201
- Nets
- 165
- Pads
- 643
- Tracks, vias
- 1,559, 198
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Dec 2021
- Updated
- 7 Mar 2022
Overview
Teebeutel is an open-source printed circuit board by entropia, from the entropia/Teebeutel-Hardware repository on GitHub. It is a 2-layer board of 72 × 121 mm with 201 parts on 165 nets, routed with 1,559 tracks and 198 vias.
It is built around the CH340C, PPSI262 and SDB628, with the SGP30, TLV62569DBVR-TP and SRV05-4 among its other parts. Its parts include 50 capacitors, 42 resistors, 20 diodes, 12 ICs and 9 transistors. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
12CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersPPSI262
LGA-20(3x7)SPI、I2C LGA-20(3x7) Heart Rate Sensors ROHSPartronHeart Rate SensorSDB628
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 28V 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHSSHOUDINGDC-DC ConvertersSGP30
Gas sensor for indoor air quality applications. Datasheet: https://www.sensirion.com/file/datasheet_sgp30/SensirionUncategorisedTLV62569DBVR-TP
SOT-23-51 1.5MHz 2.7V~5.5V 2A 40uA Adjustable Buck Built-in No SOT-23-5 DC-DC Converters ROHSTECH PUBLICDC-DC ConvertersSRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)LIS2DE12
LGA-12(2x2)-40℃~+85℃ 1.71V~3.6V 500nA 8bit Accelerometer SPI、I2C X,Y,Z ±16g LGA-12(2x2) Accelerometers ROHSSTMicroelectronicsAccelerometersPCA9539PW
TSSOP-24-40℃~+85℃ 16 1uA 2.3V~5.5V 4 400kHz I2C、SMBus Interrupt Output Reset function、Cascading and address extension TSSOP-24 I/O Expanders ROHSNXP SemiconductorsI/O ExpandersWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedAO3400
SOT-23-55℃~+150℃ 1 N-channel 1.05nF 1.4V 1.5W 28mΩ@10V 30V 5.8A 77pF N-Channel SOT-23 MOSFETs ROHSGOODWORKMOSFETs1N4148WL
SOD-123F-55℃~+150℃ 1.5V@300mA 100V 1uA@75V 300mA 400mW 4A 8ns Standalone SOD-123F Switching Diodes ROHS晶导微电子Switching DiodesK1-1506SN-01
SMD,10x10mmSMD,10x10mm Multi-Directional Switches ROHSHRO ElectronicsMulti-Directional Switches
README
README.mdTeebeutel
An (experimental) ESP32-dev-board in the shape of the Entropia logo.
Head over to the wiki for more information.

Parts
201| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 100nF | Capacitor_SMD:C_0603_1608Metric | C22, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36, C37 +13 |
| 16 | 10µF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16 |
| 15 | 100kΩ 1% | Resistor_SMD:R_0603_1608Metric | R28, R29, R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40, R41, R42 |
| 12 | WS2812B | Teebeutel_Special_Parts:WS2812B-4020 | D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15 |
| 9 | 2.2kΩ | Resistor_SMD:R_0603_1608Metric | R19, R20, R21, R22, R23, R24, R25, R26, R27 |
| 9 | AO3400 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 |
| 6 | 56Ω | Resistor_SMD:R_0603_1608Metric | R13, R14, R15, R16, R17, R18 |
| 5 | 1N4148WL | Diode_SMD:D_SOD-123F | D16, D17, D18, D19, D20 |
| 5 | 4.7µF | Capacitor_SMD:C_0603_1608Metric | C17, C18, C19, C20, C21 |
| 4 | 470Ω | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12 |
| 3 | 30kΩ 1% | Resistor_SMD:R_0603_1608Metric | R6, R7, R8 |
| 2 | 453kΩ 1% | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | Polyfuse | Fuse:Fuse_0805_2012Metric | F1, F2 |
| 2 | RJ45_Shielded | Connector_RJ:RJ45_Amphenol_RJHSE538X | J3, J4 |
| 2 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U13, U14 |
| 1 | 1µH | Inductor_SMD:L_1210_3225Metric | L2 |
| 1 | 4.7µH | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 510kΩ | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 560kΩ | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 620kΩ 1% | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | ADC Battery (1/4 Battery voltage) | TestPoint:TestPoint_Pad_D1.0mm | TP24 |
| 1 | Battery | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U7 |
| 1 | Charging status | TestPoint:TestPoint_Pad_D1.0mm | TP23 |
| 1 | Conn_01x06_Female | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical_SMD_Pin1Left | J6 |
| 1 | Conn_01x06_Female | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical_SMD_Pin1Right | J5 |
| 1 | Conn_01x10_Female | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical_SMD_Pin1Left | J9 |
| 1 | Conn_01x10_Female | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical_SMD_Pin1Right | J10 |
| 1 | Conn_01x30_Female | Connector_FFC-FPC:TE_3-1734839-0_1x30-1MP_P0.5mm_Horizontal | J1 |
| 1 | DTR 3.3V | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | ESP32 EN | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | ESP32 IO0 | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | ESP32-WROOM-32E(16MB) | RF_Module:ESP32-WROOM-32 | U8 |
| 1 | EXP-INT | TestPoint:TestPoint_Pad_D1.0mm | TP17 |
| 1 | EXP-~RST | TestPoint:TestPoint_Pad_D1.0mm | TP18 |
| 1 | IR-RX | TestPoint:TestPoint_Pad_D1.0mm | TP19 |
| 1 | IR-TX | TestPoint:TestPoint_Pad_D1.0mm | TP20 |
| 1 | I²C SCL 1.8V | TestPoint:TestPoint_Pad_D1.0mm | TP16 |
| 1 | I²C SDA 1.8V | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | K1-1506SN-01 | Teebeutel_Special_Parts:K1-1506SN-01 | SW2 |
| 1 | LED-GREEN | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | LED-IR | Teebeutel_Special_Parts:LKIR30102C | D1 |
| 1 | LED-RED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | LIS2DE12 | Package_LGA:LGA-12_2x2mm_P0.5mm | U9 |
| 1 | LOGO | Teebeutel_Graphics:flapflap | G*** |
| 1 | LOGO | Teebeutel_Graphics:angle-double-up | G*** |
| 1 | LOGO | Teebeutel_Graphics:book-open-variant | G*** |
| 1 | LOGO | Teebeutel_Graphics:Teebeutel-eV-noCU | G*** |
| 1 | LOGO | Teebeutel_Graphics:wind | G*** |
| 1 | LOGO | Teebeutel_Graphics:name-tag | G*** |
| 1 | LOGO | Teebeutel_Graphics:battery-charging-low | G*** |
| 1 | LOGO | Teebeutel_Graphics:battery-charging-high | G*** |
| 1 | LOGO | Teebeutel_Graphics:rotate-orbit | G*** |
| 1 | LOGO | Teebeutel_Graphics:qr-code | G*** |
| 1 | LOGO | Teebeutel_Graphics:fairydust | G*** |
| 1 | LOGO | Teebeutel_Graphics:alert-octagon | G*** |
| 1 | LOGO | Teebeutel_Graphics:wifi | G*** |
| 1 | LOGO | Teebeutel_Graphics:heartbeat | G*** |
| 1 | LOGO | Teebeutel_Graphics:exchange-alt | G*** |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U11 |
| 1 | Micro_SD_Card | Teebeutel_Special_Parts:TF15X15 | J7 |
| 1 | Motor_DC | Teebeutel_Special_Parts:LNLON-S3070P | M1 |
| 1 | OLED CS | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | OLED DC | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | OLED MOSI | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | OLED RESET | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | OLED SCK | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | OLED VPP (13V) | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | PCA9539PW | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U1 |
| 1 | PPSI262 | Teebeutel_Special_Parts:PPSI262 | U4 |
| 1 | RM-V8xxC_TR1 | Teebeutel_Special_Parts:IRM-V8xxC-TR1 | U3 |
| 1 | RTS 3.3V | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | SD-Card CS | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | SD-Card MISO | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | SD-Card MOSI | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | SD-Card SCK | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | SDB628 | Package_TO_SOT_SMD:SOT-23-6 | U10 |
| 1 | SGP30 | Teebeutel_Special_Parts:SGP30 | U5 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | TLV62569DBVR | Package_TO_SOT_SMD:SOT-23-5 | U12 |
The 186 most common of 201 parts.
Similar boards
- 2 layers77 × 77 mm

- 6 layers268 × 230 mm

Rf board
PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.
357 parts2CERN-OHL-S-2.0 - 2 layers98 × 98 mm

- 4 layers49.8 × 25.5 mm

Corevus toolboard
calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers
84 parts25 - 2 layers40 × 98 mm

- 2 layers23.5 × 5 mm

Metsta
losneoo/esp32-wsn-telemetry-node
Low-power ESP32 environmental telemetry node. Includes custom KiCad hardware schematics, ESP-NOW protocol broadcasting, custom I2C drivers, and deep sleep power management.
25 parts - 2 layers55 × 100 mm

- 4 layers43.1 × 37.7 mm

Machine Controller
FinnKrass/MX-Break-In-Machine
64 Slot Break In Machine for MX Style Switches
84 parts15CERN-OHL-S-2.0
Questions
How big is the Teebeutel PCB?
It measures 72 × 121 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Teebeutel use?
201 parts, built around the CH340C, PPSI262, SDB628 and SGP30. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Teebeutel KiCad files?
From the entropia/Teebeutel-Hardware repository on GitHub, at the commit this page was made from: the board is Teebeutel.kicad_pcb and its schematic Teebeutel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Teebeutel design in my own project?
Its repository states no licence, so its author keeps all rights: ask entropia before reusing the design.