Skip to the content

Boards using the RFX2401C

28 boards

Boards in 26 GitHub repositories, designed in KiCad, that use the RFX2401C by Skyworks Solutions (-10dB -12dB -15dB -40℃~+85℃ -8dB -8dBm 2.4GHz~2.5GHz 22dBm 2V~3.6V ZigBee 集成低噪声放大器、集成射频开关、集成功率放大器、集成射频滤波器、集成功率检测器 QFN-16-EP(3x3) RF Front End Circuits ROHS). See how each wires it, with its parts, size, README and files; the RFX2401C’s symbol, footprint and pinout are on its own page.

  • 6 layers64.2 × 17.3 mmOpenRX panel rev2.2, the printed circuit board in 3D

    OpenRX panel rev2.2

    OpenDrone-hw/OpenRX

    OpenRX open-source ExpressLRS receiver family hub; board sources live in four dedicated hardware repositories.

    254 parts489CERN-OHL-S-2.0
  • 4 layers37.7 × 37.7 mmDual radio pcb, the printed circuit board in 3D

    Dual radio pcb

    AnyLeaf/elrs-hardware

    This repo contains open source hardware information for AnyLeaf ELRS receivers

    68 parts66MIT
  • 6 layers17 × 15.7 mmOpenRX Gemini, the printed circuit board in 3D

    OpenRX Gemini

    OpenDrone-hw/OpenRX-Gemini

    Open-source dual-radio, dual-band ExpressLRS receiver for Gemini and Xrossband.

    86 parts11CERN-OHL-S-2.0
  • 6 layers39.5 × 39.5 mmTD1 2.4G, the printed circuit board in 3D

    TD1 2.4G

    Paschalis/UAV-TelemetryLink

    Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.

    63 parts11MIT
  • 8 layers38 × 38 mmKolibri v0.5, the printed circuit board in 3D

    Kolibri v0.5

    bastian2001/Kolibri-FC-Hardware

    Hardware for the Kolibri Flight Controller. 30mm/20mm FC with RP2350 + ELRS onboard

    221 parts8GPL-3.0
  • 6 layers10 × 17.3 mmOpenRX Mono, the printed circuit board in 3D

    OpenRX Mono

    OpenDrone-hw/OpenRX-Mono

    Open-source dual-band ExpressLRS receiver with one LR1121 radio and one U.FL antenna.

    62 parts6CERN-OHL-S-2.0
  • 2 layers43 × 43 mmEsp8266-cc2530, the printed circuit board in 3D

    Esp8266-cc2530

    willg/esp8266-cc2530

    RFX2401C Mode Truth Table: | TXEN | RXEN | Mode | | --- | --- | --- | | 1 | X | TX Active | 0 | 1 | RX Active | 0 | 0 | Chip shutdown

    36 parts6
  • 6 layers63.5 × 50.8 mmNavigation Board, the printed circuit board in 3D

    Navigation Board

    LouisVizard/NavBoard

    A full navigation solution featuring MCU, GNSS receiver, RF transceiver, and 9-DOF IMU

    136 parts2
  • 4 layers80.2 × 80.2 mmRoboy crazyfly, the printed circuit board in 3D

    Roboy crazyfly

    Roboy/roboy_crazyfly

    roboys version of crazyfly 2

    108 parts2BSD-3-Clause
  • 4 layers100 × 95.1 mmMain PCB v2, the printed circuit board in 3D

    Main PCB v2

    ICRS/SSL-2024

    188 parts1Apache-2.0
  • 4 layers60 × 100 mmPCB Drone With FPGA, the printed circuit board in 3D

    PCB Drone With FPGA

    mfkiwl/PCB-Drone-With-FPGA

    PCB design for the Drone, FPGA on board

    97 parts1
  • 4 layers37.5 × 36 mmTD M10S LSM, the printed circuit board in 3D

    TD M10S LSM

    Paschalis/fc-plus-sensor-module

    FC Plus is a modular add-on board for UAV flight controllers, providing advanced telemetry, GPS, object avoidance (ToF, Sonar, IR), and LED indicators for status feedback.

    85 parts1GPL-3.0
  • 8 layers35 × 35 mmOpenAIO, the printed circuit board in 3D

    OpenAIO

    tetraethylmethane/NIDAR-RescueSwarm

    Three autonomous drones that search a flood zone, find survivors, geotag them, and drop medical kits — with no network, no pilot, and one operator who only presses start.

    285 parts1
  • 4 layers55 × 40 mmAmon Link, the printed circuit board in 3D

    Amon Link

    TilenTinta/Amon_Link

    An open-source electronic designed for RF communication between a PC-based Ground Control system and the Amon drone

    106 parts1MIT
  • 4 layers19 × 34 mmNRF24PA, the printed circuit board in 3D

    NRF24PA

    bemelab/nrf24L01-modules

    nRF24L01+ tabanlı RF modül tasarımları. Her proje kendi klasöründe, kendi README'si ve tasarım notlarıyla durur.

    39 parts
  • 2 layers40 × 20 mmNRF24module, the printed circuit board in 3D

    NRF24module

    Eldalote/nRF24L01P-PA-LNA-Module

    PCB Design for nRF24L01P PA LNA module

    32 parts
  • 2 layers30.2 × 39.8 mmRP2350B Flight controller, the printed circuit board in 3D

    RP2350B Flight controller

    Madjogger1202/RP2350B-Flight-controller

    Ultra-compact flight controller for mini quadcopters, based on RP2350B MCU.

    149 parts
  • 4 layers50 × 50 mmTrx, the printed circuit board in 3D

    Trx

    MTalon63/mobile-ground-station

    74 parts
  • 4 layers25.8 × 20.7 mmSx1280-breakout, the printed circuit board in 3D

    Sx1280-breakout

    MTalon63/sx1280-breakout

    SX1280 LoRa module breakout module to test stuff, as they are only available from chinese sellers

    30 parts
  • 4 layers67 × 23.5 mmTelemetry Receiver, the printed circuit board in 3D

    Telemetry Receiver

    PUT-Motorsport/PUTM_EV_TELEMETRY_RECEIVER_2022

    56 partsApache-2.0
  • 4 layers50 × 30 mmNRF24, the printed circuit board in 3D

    NRF24

    sneakylizard123-4/nRF24

    A small 2.4GHz module based on the nRF24L01P+, with an SMA jack for an external antenna, an on-board RFX2401C PA/LNA for extra range, and a breadboard friendly SPI header. Runs from 3.3V or 5V off an on-board LDO.

    40 partsCERN-OHL-P-2.0
  • 4 layers38 × 38 mmELRS Link, the printed circuit board in 3D

    ELRS Link

    SuperMK15/ELRS_Link_PCB

    Custom 2.4 GHz ExpressLRS link board featuring an ESP32-C3, SX1281 LoRa transceiver, and dedicated RF front-end with external antenna connectivity.

    50 parts
  • 2 layers85.8 × 53.4 mmWtracker, the printed circuit board in 3D

    Wtracker

    supisbe12/Wtrack

    A PCB that tracks it's location using both bluetooth and gps system

    37 parts
  • 2 layersOpenRX Duak, the printed circuit board in 3D

    OpenRX Duak

    yasir-shahzad/OpenRX

    Open-source ExpressLRS 4.0 receiver family. Part of the OpenDrone ecosystem.

    45 parts