
OpenRX Gemini
OpenDrone-hw/OpenRX-Gemini
Open-source dual-radio, dual-band ExpressLRS receiver for Gemini and Xrossband.

Open-source dual-band ExpressLRS receiver with one LR1121 radio and one U.FL antenna.
OpenRX Mono is an open-source printed circuit board by OpenDrone-hw, from the OpenDrone-hw/OpenRX-Mono repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 6-layer board of 10 × 17.3 mm with 62 parts on 62 nets, routed with 341 tracks and 125 vias.
It is built around the ESP32-C3FH4, LR1121IMLTRT and RFX2401C, with the SKY13373-460LF, 2450FM07D0034T and 0900PC16J0042001E among its other parts. Its parts include 31 capacitors, 8 resistors, 5 ICs, 5 inductors and 1 diode. It belongs with the radio and wireless boards and the ESP32 and RISC-V boards of this library.
Open-source dual-band ExpressLRS receiver for FPV aircraft. OpenRX Mono uses an ESP32-C3 and one LR1121 with a 2.4 GHz PA/LNA, sub-GHz matching network and a shared U.FL antenna interface.
| Band | 2.4 GHz and sub-GHz |
| Radio | LR1121 |
| Antenna | U.FL |
| Telemetry power | Up to 22 dBm (158 mW) |
| Protocol | CRSF |
| MCU | ESP32-C3 |
| Input | 5 V pad |
| Firmware | ExpressLRS |
| Flashing | Betaflight passthrough or Wi-Fi |
| Dimensions | 10.0 x 17.3 mm |
| PCB | 6-layer, 1.0 mm |
Technical write-up, part list and layout constraints: AGENTS.md.
What pairs with what, and what is available: opendrone.be.
See CONTRIBUTING.md.
Hardware licensed under CERN-OHL-S-2.0, see LICENSE.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0201_0603Metric | C5, C6, C9, C12, C13, C14, C16 |
| 7 | 1uF | Capacitor_SMD:C_0201_0603Metric | C4, C10, C17, C25, C27, C28, C31 |
| 4 | 10k | Resistor_SMD:R_0201_0603Metric | R2, R3, R4, R5 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C8, C11, C18 |
| 3 | 47p | Capacitor_SMD:C_0201_0603Metric | C2, C23, C24 |
| 2 | 1.2pF | Capacitor_SMD:C_0201_0603Metric | C29, C30 |
| 2 | 100k | Resistor_SMD:R_0201_0603Metric | R7, R8 |
| 2 | 15pF | Capacitor_SMD:C_0201_0603Metric | C1, C3 |
| 1 | 0900PC16J0042001E | OpenRX-Shared:FILTER-SMD_10P-L2.0-W1.6-BL | T1 |
| 1 | 10nF | Capacitor_SMD:C_0201_0603Metric | C26 |
| 1 | 10pF | Capacitor_SMD:C_0201_0603Metric | C7 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 1n | Capacitor_SMD:C_0201_0603Metric | C22 |
| 1 | 2.0nH | Inductor_SMD:L_0201_0603Metric | L3 |
| 1 | 2.2nF | Capacitor_SMD:C_0201_0603Metric | C19 |
| 1 | 2.5nH | Inductor_SMD:L_0201_0603Metric | L4 |
| 1 | 200 | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | 220 | Resistor_SMD:R_0201_0603Metric | R6 |
| 1 | 220pF | Capacitor_SMD:C_0201_0603Metric | C21 |
| 1 | 2450AT18A100E | OpenRX-Shared:ANT-SMD_L3.2-W1.6 | AE1 |
| 1 | 2450FM07D0034T | OpenRX-Shared:FILTER-SMD_4P-L1.0-W0.5-L | FL1 |
| 1 | 24nH | Inductor_SMD:L_0201_0603Metric | L2 |
| 1 | 470nF | Capacitor_SMD:C_0201_0603Metric | C20 |
| 1 | 47nH | Inductor_SMD:L_0402_1005Metric | L5 |
| 1 | 47pF | Capacitor_SMD:C_0201_0603Metric | C15 |
| 1 | 5V | OpenRX-Shared:SolderPad_1.2x2.0mm | TP3 |
| 1 | BOOT | OpenRX-Shared:SolderPad_1.2x2.0mm | TP5 |
| 1 | CJ17-400001010B20 | OpenRX-Shared:CRYSTAL-SMD_4P-L1.6-W1.2-BL | X1 |
| 1 | Conn_Coaxial_Small | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J1 |
| 1 | ESP32-C3 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm | U1 |
| 1 | GND | OpenRX-Shared:SolderPad_1.2x2.0mm | TP4 |
| 1 | LOGO | OpenRX-Shared:expresslrs_logo | G*** |
| 1 | LR1121IMLTRT | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm | U3 |
| 1 | OW7EL89CENUYO3YLC-32M | OpenRX-Shared:OSC-SMD_4P-L2.0-W1.6-BL_TXC_7Z | OSC1 |
| 1 | RFX2401C | OpenRX-Shared:QFN-16_L3.0-W3.0-P0.50-BL-EP1.7 | U4 |
| 1 | RX | OpenRX-Shared:SolderPad_1.2x2.0mm | TP1 |
| 1 | SKY13373-460LF | OpenRX-Shared:QFN-12_EP_2x2_Pitch0.5mm | U5 |
| 1 | TLV75533PDQNR | OpenRX-Shared:X2SON-4_L1.0-W1.0-P0.65-TL-EP | U2 |
| 1 | TX | OpenRX-Shared:SolderPad_1.2x2.0mm | TP2 |
| 1 | XL-1010RGBC-WS2812B | OpenRX-Shared:LED-SMD_4P-L1.0-W1.0-TL_XL-1010RGBC-WS2812B | D1 |

OpenDrone-hw/OpenRX-Gemini
Open-source dual-radio, dual-band ExpressLRS receiver for Gemini and Xrossband.

tetraethylmethane/NIDAR-RescueSwarm
Three autonomous drones that search a flood zone, find survivors, geotag them, and drop medical kits — with no network, no pilot, and one operator who only presses start.

OpenDrone-hw/OpenRX
OpenRX open-source ExpressLRS receiver family hub; board sources live in four dedicated hardware repositories.

yasir-shahzad/OpenRX
Open-source ExpressLRS 4.0 receiver family. Part of the OpenDrone ecosystem.

OpenDrone-hw/OpenRX-Lite
Open-source 2.4 GHz ExpressLRS receiver with an on-board ceramic antenna.

OpenDrone-hw/OpenAIO
Open-source AIO for 2-6S toothpick quads: flight controller, 4-in-1 AM32 ESC and ExpressLRS receiver, 25.5x25.5 mm.

aprskalo1/nano24-elrs-receiver
nano24: compact 2.4 GHz ExpressLRS receiver prototype with ESP32-C3, SX1281, CRSF and a printed Wi-Fi antenna. KiCad sources, BOM, Gerbers and validation notes.

AnyLeaf/elrs-hardware
This repo contains open source hardware information for AnyLeaf ELRS receivers
It measures 10 × 17.3 mm and has 6 copper layers, 1 mm thick.
62 parts, built around the ESP32-C3FH4, LR1121IMLTRT, RFX2401C and SKY13373-460LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OpenDrone-hw/OpenRX-Mono repository on GitHub, at the commit this page was made from: the board is hardware/OpenRX-Mono.kicad_pcb and its schematic hardware/OpenRX-Mono.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).