

NRF24module
PCB Design for nRF24L01P PA LNA module
- Size
- 40 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 24
- Pads
- 107
- Tracks, vias
- 134, 246
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Aug 2020
- Updated
- 18 Dec 2020
Overview
NRF24module is an open-source printed circuit board by Eldalote, from the Eldalote/nRF24L01P-PA-LNA-Module repository on GitHub. It is a 2-layer board of 40 × 20 mm with 32 parts on 24 nets, routed with 134 tracks and 246 vias.
It is built around the RFX2401C and NRF24L01P-R. Its parts include 17 capacitors, 5 inductors, 4 resistors, 2 ICs and 2 connectors.
Main components
2RFX2401C
QFN-16-EP(3x3)-10dB -12dB -15dB -40℃~+85℃ -8dB -8dBm 2.4GHz~2.5GHz 22dBm 2V~3.6V ZigBee 集成低噪声放大器、集成射频开关、集成功率放大器、集成射频滤波器、集成功率检测器 QFN-16-EP(3x3) RF Front End Circuits ROHSSkyworks SolutionsRF Front End CircuitsNRF24L01P-R
QFN-20-EP(4x4)-40℃~+85℃ -82dBm 0dBm 1.9V~3.6V 11.3mA 13.5mA 2.4GHz 2.4GHz~2.525GHz 2Mbps ISM Power-on reset function、Supports RSSI function、CRC check function、Automatic response function、Automatic retransmission function SPI transceiver QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
README
README.mdnRF24L01P-PA-LNA-Module DO NOT USE
DO NOT USE THIS DESIGN! When doing further projects with the nRF24L01p and PA LNA module, I came to the conclusion that I made some significant design errors in this design. The current version of the design might function, maybe, but I know for sure that there are some errors. For a better design look at my Drone project. Both the drone PCB and the remote PCB have this module integrated on the PCB.
PCB Design for nRF24L01P PA LNA module
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1pF | Capacitor_SMD:C_0402_1005Metric | C12, C13, C14, C15 |
| 3 | 2.7nH | Inductor_SMD:L_0402_1005Metric | L2, L4, L5 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C9, C17 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 1 | 0.3pF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 1.0pF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 1.5pF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 2.2nF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 220pF | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 22K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 2K | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 3.9nH | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 33nF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 4.7pF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 8.2nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J2 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | LOGO1 |
| 1 | RFX2401C | SamacSys_Parts:QFN50P300X300X60-17N-D | U2 |
| 1 | SMA-RP | Connector_Coaxial:SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | J1 |
| 1 | nRF24L01P | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
Similar boards
- 4 layers60 × 100 mm

- 4 layers19 × 34 mm

NRF24PA
bemelab/nrf24L01-modules
nRF24L01+ tabanlı RF modül tasarımları. Her proje kendi klasöründe, kendi README'si ve tasarım notlarıyla durur.
39 parts - 2 layers30.2 × 39.8 mm

RP2350B Flight controller
Madjogger1202/RP2350B-Flight-controller
Ultra-compact flight controller for mini quadcopters, based on RP2350B MCU.
149 parts - 4 layers50 × 30 mm

NRF24
sneakylizard123-4/nRF24
A small 2.4GHz module based on the nRF24L01P+, with an SMA jack for an external antenna, an on-board RFX2401C PA/LNA for extra range, and a breadboard friendly SPI header. Runs from 3.3V or 5V off an on-board LDO.
40 partsCERN-OHL-P-2.0 - 6 layers64.2 × 17.3 mm

OpenRX panel rev2.2
OpenDrone-hw/OpenRX
OpenRX open-source ExpressLRS receiver family hub; board sources live in four dedicated hardware repositories.
254 parts489CERN-OHL-S-2.0 - 4 layers37.7 × 37.7 mm

Dual radio pcb
AnyLeaf/elrs-hardware
This repo contains open source hardware information for AnyLeaf ELRS receivers
68 parts66MIT - 6 layers17 × 15.7 mm

OpenRX Gemini
OpenDrone-hw/OpenRX-Gemini
Open-source dual-radio, dual-band ExpressLRS receiver for Gemini and Xrossband.
86 parts11CERN-OHL-S-2.0 - 6 layers39.5 × 39.5 mm

TD1 2.4G
Paschalis/UAV-TelemetryLink
Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.
63 parts11MIT
Questions
How big is the NRF24module PCB?
It measures 40 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NRF24module use?
32 parts, built around the RFX2401C and NRF24L01P-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NRF24module KiCad files?
From the Eldalote/nRF24L01P-PA-LNA-Module repository on GitHub, at the commit this page was made from: the board is nRF24module/nRF24module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NRF24module design in my own project?
Its repository states no licence, so its author keeps all rights: ask Eldalote before reusing the design.