Skip to the content
2 layers30.2 × 39.8 mmRP2350B Flight controller, the printed circuit board in 3D

Ultra-compact flight controller for mini quadcopters, based on RP2350B MCU.

Size
30.2 × 39.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
149
Nets
116
Pads
610
Tracks, vias
637, 493
Pours
15
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Sep 2025
Updated
7 Sep 2025

Overview

RP2350B Flight controller is an open-source printed circuit board by Madjogger1202, from the Madjogger1202/RP2350B-Flight-controller repository on GitHub. It is a 2-layer board of 30.2 × 39.8 mm with 149 parts on 116 nets, routed with 637 tracks and 493 vias.

It is built around the RP2350B, RFX2401C and NRF24L01P-R, with the USBLC6-2SC6, B5819W and FS3400 among its other parts. Its parts include 54 capacitors, 31 resistors, 8 diodes, 7 inductors and 4 transistors. It belongs with the robots and motor control boards and the RP2350 boards of this library.

Main components

12

README

Readme.md

RP2350B-Flight-controller

Ultra-compact flight controller for mini quadcopters, based on RP2350B MCU.
Board size: 30.5 × 39.8 mm, yet includes IMU, radio module, motor drivers, and full USB power support.

alt text


Key Features

  • MCU: RP2350B (dual-core, PIO, USB device)
  • IMU: LSM6DS3 (accelerometer + gyroscope, SPI connection)
  • Radio module: NRF24L01 + RFX2401C PA/LNA amplifier
  • Motors: 4× brushed DC motors (up to 5 A per channel, short peak)
  • USB-powered flight possible (low-current motors, enough supply over USB)
  • Additional expansion pins (GPIO3–16 + SWD) for sensors, debugging, or add-ons

Pin Mapping

IMU (LSM6DS3) — SPI2

RP2350B GPIOSignalNotes
GPIO19SPI2_MISOSensor data out
GPIO22SPI2_MOSISensor data in
GPIO23SPI2_SCKSPI clock
GPIO20IMU_INT1Interrupt 1
GPIO21IMU_INT2Interrupt 2

Radio Module (NRF24L01 + RFX2401C)

RP2350B GPIOSignalNotes
GPIO28SPI_MOSIShared SPI bus
GPIO36SPI_MISOShared SPI bus
GPIO37SPI_SCKShared SPI bus
GPIO30NRF_CSChip select
GPIO31NRF_CEEnable
GPIO32NRF_IRQInterrupt

Motors

RP2350B GPIOOutputNotes
GPIO45Motor_1Brushed motor driver
GPIO46Motor_2Brushed motor driver
GPIO47Motor_3Brushed motor driver
GPIO48Motor_4Brushed motor driver
GPIO49Motor_currentCurrent sense
GPIO52Motor_voltageBattery/rail voltage sense

LEDs

RP2350B GPIOSignalNotes
GPIO17LED1Status LED
GPIO18LED2Status LED

Debug / Expansion

  • SWD interface exposed for programming/debugging
  • GPIO3–16 free for custom extensions (I²C, UART, SPI, PWM, ADC etc.)

Power

  • Powered from USB or external battery
  • USB can sustain hover/low-thrust operation with small coreless motors
  • Onboard regulation for MCU, IMU, radio, and motor supply

alt text

Use Case

  • Designed for tiny brushed quadcopters and robotics experiments
  • Combines motion sensing, wireless control, and motor drivers in one small board
  • Fits into custom drone frames without extra breakout boards

Quick Start

  1. Connect via USB-C for firmware flashing and testing.
  2. Flash firmware (e.g. custom flight stack on RP2350B).
  3. Connect brushed motors to outputs GPIO45–48.
  4. Pair radio link via NRF24L01 (with RFX2401C amp).
  5. Power from USB for tests, or from LiPo for flight.

Notes

  • Motor channels rated for 5 A peak per motor (coreless brushed).
  • Ensure airflow for heat dissipation at higher loads.
  • Expansion pins allow integration of GPS, barometer, or additional sensors.

alt text

Parts

149
QtyValueFootprintReferences
244.7uFCapacitor_SMD:C_0201_0603MetricC15, C18, C22, C24, C25, C26, C27, C29, C35, C36, C37, C38, C40, C41, C42, C43 +8
16TestPointTestPoint:TestPoint_Pad_D1.0mmTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP15, TP16
101KPCM_Resistor_SMD_AKL:R_0201_0603MetricR2, R3, R4, R6, R7, R8, R9, R11, R13, R14
10TestPointTestPoint:TestPoint_Pad_D1.5mmTP17, TP18, TP19, TP20, TP21, TP22, TP23, TP24, TP25, TP26
7100nFCapacitor_SMD:C_0201_0603MetricC4, C20, C30, C31, C33, C34, C44
710KPCM_Resistor_SMD_AKL:R_0201_0603MetricR12, R18, R19, R27, R28, R29, R30
51.5pFCapacitor_SMD:C_0201_0603MetricC10, C16, C19, C21, C23
522uFCapacitor_SMD:C_0402_1005MetricC47, C51, C52, C53, C54
5LOGOLOGOG***, G***, G***, G***, G***
4220RPCM_Resistor_SMD_AKL:R_0201_0603MetricR23, R24, R25, R26
422pFCapacitor_SMD:C_0201_0603MetricC1, C2, C32, C39
4B5819WDiode_SMD:D_SOD-123D5, D6, D7, D8
4FS3400Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4
3LED 0402LED_SMD:LED_0402_1005MetricD1, D2, D3
210nFCapacitor_SMD:C_0201_0603MetricC9, C28
216MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1, Y2
21MPCM_Resistor_SMD_AKL:R_0201_0603MetricR1, R15
22.4nHInductor_SMD:L_0201_0603MetricL4, L5
227RPCM_Resistor_SMD_AKL:R_0201_0603MetricR16, R17
25.1KPCM_Resistor_SMD_AKL:R_0201_0603MetricR21, R22
2KMR221GLFSButton_Switch_SMD:SW_SPST_PTS810SW1, SW2
10.3pFCapacitor_SMD:C_0201_0603MetricC14
10RPCM_Resistor_SMD_AKL:R_0805_2012MetricR31
11nFCapacitor_SMD:C_0201_0603MetricC12
11pFCapacitor_SMD:C_0201_0603MetricC13
12.2nFCapacitor_SMD:C_0201_0603MetricC8
12.7nHInductor_SMD:L_0201_0603MetricL3
120KPCM_Resistor_SMD_AKL:R_0201_0603MetricR10
1220pFCapacitor_SMD:C_0201_0603MetricC17
122KPCM_Resistor_SMD_AKL:R_0201_0603MetricR5
12mRPCM_Resistor_SMD_AKL:R_1206_3216MetricR20
13.9nHInductor_SMD:L_0201_0603MetricL2
133nFCapacitor_SMD:C_0201_0603MetricC3
14.7pFCapacitor_SMD:C_0201_0603MetricC11
18.2nHInductor_SMD:L_0201_0603MetricL1
1BCT2057ELT33BCT2057ELTAJ:BCT2057ELTAJDD5
1Conn_CoaxialConnector_Coaxial:U.FL_Molex_MCRF_73412-0110_VerticalX1
1FHW0603UF3R3JSTInductor_SMD:L_0603_1608MetricL7
1INA180A2Package_TO_SOT_SMD:SOT-23-5U2
1LSM6DS3Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yDD2
1RFX2401CRFX2401C:RFX2401CDA1
1RP2350BRP2350B:QFN40P1000X1000X90-81N-DDD4
1SS54FPCM_Diode_SMD_AKL:D_SMAFLD4
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U1
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalX2
1VHF160808H33NJTInductor_SMD:L_0603_1608MetricL6
1W25Q16JVUXIQ_TRW25Q16JVUXIQ:W25Q16JVUXIQDD3
1nRF24L01PPackage_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mmDD1

Similar boards

  • 2 layers71 × 63 mmPowerSection, the printed circuit board in 3D

    PowerSection

    brettski74/Modular-Solder-Reflow

    Modular designs for a DIY solder reflow hotplate, controller, power supply and more.

    39 parts6
  • 4 layers78 × 86 mmSJ-201-R10, the printed circuit board in 3D

    SJ-201-R10

    MycroftAI/hardware-mycroft-mark-II

    Mycroft's Mark II Rpi mechanical, electrical and industrial designs

    185 parts113
  • 6 layers75 × 78.4 mmPoe backplate, the printed circuit board in 3D

    Poe backplate

    dotstartech/wall-panel

    Wall mounted 4 inch touch display panel with CM4 inside

    125 parts445
  • 2 layers48.6 × 119.8 mmSkjold hovedkort, the printed circuit board in 3D

    Skjold hovedkort

    SebastianKristo/pult-forsterker

    Ett kort (180 × 100 mm, 2 lag) som erstatter alle modulene, og som i tillegg har USB-delingsswitch, to AUX-innganger som digitaliseres (så alt kan mikses), «smart relé» for strømmen til forsterkerdelen…

    119 partsMIT
  • 4 layers60 × 100 mmPCB Drone With FPGA, the printed circuit board in 3D

    PCB Drone With FPGA

    mfkiwl/PCB-Drone-With-FPGA

    PCB design for the Drone, FPGA on board

    97 parts1
  • 4 layers19 × 34 mmNRF24PA, the printed circuit board in 3D

    NRF24PA

    bemelab/nrf24L01-modules

    nRF24L01+ tabanlı RF modül tasarımları. Her proje kendi klasöründe, kendi README'si ve tasarım notlarıyla durur.

    39 parts
  • 2 layers40 × 20 mmNRF24module, the printed circuit board in 3D

    NRF24module

    Eldalote/nRF24L01P-PA-LNA-Module

    PCB Design for nRF24L01P PA LNA module

    32 parts

Questions

How big is the RP2350B Flight controller PCB?

It measures 30.2 × 39.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RP2350B Flight controller use?

149 parts, built around the RP2350B, RFX2401C, NRF24L01P-R and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RP2350B Flight controller KiCad files?

From the Madjogger1202/RP2350B-Flight-controller repository on GitHub, at the commit this page was made from: the board is RP2350B-Flight-controller.kicad_pcb and its schematic RP2350B-Flight-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RP2350B Flight controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask Madjogger1202 before reusing the design.