
Dual radio pcb
AnyLeaf/elrs-hardware
This repo contains open source hardware information for AnyLeaf ELRS receivers

Custom 2.4 GHz ExpressLRS link board featuring an ESP32-C3, SX1281 LoRa transceiver, and dedicated RF front-end with external antenna connectivity.
ELRS Link is an open-source printed circuit board by SuperMK15, from the SuperMK15/ELRS_Link_PCB repository on GitHub. It is a 4-layer board of 38 × 38 mm with 50 parts on 62 nets, routed with 405 tracks and 112 vias.
It is built around the ESP32-C3-MINI-1, RFX2401C and 2450FM07D0034T, with the TLV75533PDBVR-MS and WS2812B among its other parts. Its parts include 17 capacitors, 10 resistors, 6 connectors, 4 ICs and 3 diodes. It belongs with the radio and wireless boards and the ESP32 and RISC-V boards of this library.
Custom 2.4 GHz ExpressLRS link board built around an ESP32-C3 and SX1281 LoRa transceiver, with an RFX2401C RF front-end and external antenna connection.

Designed in KiCad 10. Includes the complete schematic, PCB layout, custom footprints/symbols, and manufacturing files.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R4, R5, R6, R8, R9 |
| 4 | 1.5pF | Capacitor_SMD:C_0402_1005Metric | C14, C15, C16, C17 |
| 4 | Conn_01x01 | TestPoint:TestPoint_Pad_2.5x2.5mm | J2, J3, J4, J5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C8, C13 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C12 |
| 2 | 2.4nH | Inductor_SMD:L_0402_1005Metric | L2, L3 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 0.3pF | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 1.2k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 15uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 220pF | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 2450FM07D0034T | 2450FM07D0034T:FILTER-SMD_4P-L1.0-W0.5-L | FL1 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 470nF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 52MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | Conn_01x04_MountingPin | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J1 |
| 1 | Conn_Coaxial | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J6 |
| 1 | ELRS_LOGO | Silkscreen_Graphics:ELRS_LOGO | G1 |
| 1 | ESP32-C3-MINI-1 | PCM_Espressif:ESP32-C3-MINI-1 | U1 |
| 1 | RFX2401C | RFX2401C:RFX2401C_SKY | U3 |
| 1 | SX1281 | SX1280IMLTRT:QFN24_4X4_SEM | U4 |
| 1 | TLV75533PDBVR | TLV75533PDBVR:DBV0005A_L | U2 |
| 1 | WS2812B | WS2812B-MINI-X2:LED-SMD_4P-L3.5-W3.5-TL_WS2812B-1 | LED1 |

AnyLeaf/elrs-hardware
This repo contains open source hardware information for AnyLeaf ELRS receivers

Paschalis/fc-plus-sensor-module
FC Plus is a modular add-on board for UAV flight controllers, providing advanced telemetry, GPS, object avoidance (ToF, Sonar, IR), and LED indicators for status feedback.

OpenDrone-hw/OpenRX-Gemini
Open-source dual-radio, dual-band ExpressLRS receiver for Gemini and Xrossband.

Paschalis/UAV-TelemetryLink
Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.

bastian2001/Kolibri-FC-Hardware
Hardware for the Kolibri Flight Controller. 30mm/20mm FC with RP2350 + ELRS onboard

OpenDrone-hw/OpenRX-Mono
Open-source dual-band ExpressLRS receiver with one LR1121 radio and one U.FL antenna.

tetraethylmethane/NIDAR-RescueSwarm
Three autonomous drones that search a flood zone, find survivors, geotag them, and drop medical kits — with no network, no pilot, and one operator who only presses start.

LouisVizard/NavBoard
A full navigation solution featuring MCU, GNSS receiver, RF transceiver, and 9-DOF IMU
It measures 38 × 38 mm and has 4 copper layers, 1.61 mm thick.
50 parts, built around the ESP32-C3-MINI-1, RFX2401C, 2450FM07D0034T and TLV75533PDBVR-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SuperMK15/ELRS_Link_PCB repository on GitHub, at the commit this page was made from: the board is ELRS_Link.kicad_pcb and its schematic ELRS_Link.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SuperMK15 before reusing the design.