Skip to the content

Boards using the PCA9555PW

54 boards

Boards in 41 GitHub repositories, designed in KiCad, that use the PCA9555PW by NXP Semiconductors (-40℃~+85℃ 1.1uA 16 2.3V~5.5V 3mA 400kHz 8 I2C、SMBus Interrupt Output Reset function、Cascade and address expansion TSSOP-24 I/O Expanders ROHS). See how each wires it, with its parts, size, README and files; the PCA9555PW’s symbol, footprint and pinout are on its own page.

  • 2 layers243.2 × 106 mm3W6, the printed circuit board in 3D

    3W6

    weteor/3W6

    a small compact 3x5+3 split ortho keyboard

    113 parts488
  • 2 layers199.5 × 100.5 mmSPC EVDR, the printed circuit board in 3D

    SPC EVDR

    weteor/SPC_EVDR

    38 key otholinear keyboard with offset spacebar(s)

    93 parts59CERN-OHL-P-2.0
  • 2 layers100 × 50 mmXiamocon, the printed circuit board in 3D

    Xiamocon

    shapoco/xiamocon

    Game Console-Shaped Motherboard for XIAO RP2350/ESP32S3

    111 parts39
  • 2 layers100 × 50 mmShapones xiao rp2350, the printed circuit board in 3D

    Shapones xiao rp2350

    shapoco/shapones

    an NES emulator for programming study.

    75 parts37
  • 4 layers61.8 × 79.6 mmShipwrecked pcb, the printed circuit board in 3D

    Shipwrecked pcb

    mpkendall/shipwrecked-pcb

    Shipwrecked PCB Badges

    153 parts17Unlicense
  • 2 layers128 × 103.8 mmPhase, the printed circuit board in 3D

    Phase

    mjpauly/phase

    42-key split keyboard inspired by Corne, Kyria, and Ferris

    70 parts15
  • 2 layers100 × 97.5 mmMC5000 Board, the printed circuit board in 3D

    MC5000 Board

    RickP/MC5000_DevKit

    An hardware puzzle that teaches the basics of programming.

    131 parts6GPL-3.0
  • 2 layers90 × 100 mmHost shell, the printed circuit board in 3D

    Host shell

    shapoco/wildcardboy

    Handheld Game Console with Replaceable MCU

    241 parts5
  • 4 layers345 × 213.3 mmBoom-1-Top, the printed circuit board in 3D

    Boom-1-Top

    jdotw/OpInst-Bass-1

    Three-voice analog synth with a digital control surface using CEM3340, AS3320 and similar discrete analog components.

    1,029 parts4
  • 2 layers40 × 27.1 mmMcu, the printed circuit board in 3D

    Mcu

    weteor/orthocade_mcu_board

    MCU daughterboard for the DigDug, BrkOut and Frogger keyboards

    11 parts4CERN-OHL-P-2.0
  • 2 layers237 × 139.1 mmMothbox 5.0.6, the printed circuit board in 3D

    Mothbox 5.0.6

    Digital-Naturalism-Laboratories/Mothbox_Electronics

    This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…

    185 parts3MIT
  • 2 layers306.5 × 96.9 mmOkeeb, the printed circuit board in 3D

    Okeeb

    OklahomaOpenSourceHardware/Oklahoma-Open-Hardware-Mechanical-Keyboard

    Oklahoma themed open source hardware licensed keyboard from the Oklahoma community

    202 parts2GPL-3.0
  • 4 layers98.5 × 193.5 mmSchematics, the printed circuit board in 3D

    Schematics

    apistol78/retrodack

    RetroDäck, handheld game console

    120 parts1MPL-2.0
  • 2 layers230 × 160 mmAntcontroller, the printed circuit board in 3D

    Antcontroller

    cr1tbit/antcontroller

    402 parts1
  • 2 layers88 × 115 mmBadge, the printed circuit board in 3D

    Badge

    endsummercamp/badge

    Per l'anno 2024 anche l'End Summer Camp si vuole dotare di un badge interattivo e programmabile, in linea con gli eventi simili internazionali.

    131 parts1CERN-OHL-P-2.0
  • 2 layers94.8 × 64 mmKunai16, the printed circuit board in 3D

    Kunai16

    eswai/Kunai16

    16mm pitch split keyboard (Cherry MX)

    45 parts1
  • 2 layers175.6 × 104 mmInterchange pcb right, the printed circuit board in 3D

    Interchange pcb right

    headblockhead/slab-pcb

    The circuitboard and schematics for the Slab Keyboard system.

    178 parts1CERN-OHL-S-2.0
  • 2 layers121 × 54 mmKeyboard, the printed circuit board in 3D

    Keyboard

    OleStrohm/keyboard

    A custom made keyboard with Rust firmware.

    34 parts1
  • 4 layers103 × 107 mmCentral control, the printed circuit board in 3D

    Central control

    adarwoo/KiCad

    All KiCad projects

    153 parts
  • 2 layers95 × 82 mmOrc, the printed circuit board in 3D

    Orc

    aramder/orc

    Open replacement controller board for surplus Motorola PMUN1046A relay boxes: ESP32-C3, CANopen control, 10 x 15 A channels. Independent project, not affiliated with Motorola Solutions.

    85 parts
  • 4 layers84 × 52 mmSideline cam hub, the printed circuit board in 3D

    Sideline cam hub

    dawsboss/Sports-Camera-Analytics-

    Input a video of your game and out pops the all player positioning data you want. for I put into Minutes

    102 parts
  • 4 layers114.3 × 86.4 mmLinear window controller, the printed circuit board in 3D

    Linear window controller

    eflukx/Linear-motor-window-controller

    Linear quad/octa motor slide Window controller, featuring absolute position feedback control, motor current monitoring using a ESP32-S3 hi performance controller

    201 parts
  • 2 layers94.8 × 64 mmKunai16C, the printed circuit board in 3D

    Kunai16C

    eswai/Kunai16C

    16mm pitch split keyboard (Kailh Choc switch)

    45 parts