

Oklahoma themed open source hardware licensed keyboard from the Oklahoma community
- Size
- 306.5 × 96.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 202
- Nets
- 237
- Pads
- 1,133
- Tracks, vias
- 155, 57
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Nov 2018
- Updated
- 12 Feb 2023
Overview
Okeeb is an open-source printed circuit board by OklahomaOpenSourceHardware, from the OklahomaOpenSourceHardware/Oklahoma-Open-Hardware-Mechanical-Keyboard repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 306.5 × 96.9 mm with 202 parts on 237 nets, routed with 155 tracks and 57 vias.
It is built around the ATTINY828-AU, ESP32-S3-WROOM-1-N8 and TLV62569DBV, with the PCA9555PW, SN65220DBV and SK6805E-J among its other parts. Its parts include 81 diodes, 63 switches, 15 capacitors, 15 resistors and 8 ICs. It belongs with the ESP32 and AVR (ATmega, ATtiny) boards of this library.
Main components
7ATTINY828-AU
TQFP-32(7x7)-40℃~+85℃ 1.7V~5.5V 10bit 20MHz 256Byte 28 512Byte 8 Bit 8KB AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesTLV62569DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.5MHz 2.5V~5.5V 2A 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersPCA9555PW
TSSOP-24-40℃~+85℃ 1.1uA 16 2.3V~5.5V 3mA 400kHz 8 I2C、SMBus Interrupt Output Reset function、Cascade and address expansion TSSOP-24 I/O Expanders ROHSNXP SemiconductorsI/O ExpandersSN65220DBV
SOT-23-6-40℃~+85℃ 1 1uA 35pF 6V 7V 7V IEC 61000-4-2 TVS SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)SK6805E-J
SMD,5.4x5mm-40℃~+85℃ 0.5mA 1.6mm 100mcd~200mcd 100ns 120° 1kHz 2000V 3.7V~5.5V 385mcd~697.5mcd 460nm~470nm 5.4mm 50ns 520nm~535nm 5mm 620nm~625nm 800Kbit/s 80mcd~160mcd 80ns Built-in power-on reset circuit Semi-transparent lens SMD,5.4x5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdOklahoma-Open-Hardware-Mechanical-Keyboard
Oklahoma themed open source hardware licensed keyboard from the Oklahoma community
Layout
http://www.keyboard-layout-editor.com/#/gists/58d102278691380e818329089bf505ac
Parts
202| Qty | Value | Footprint | References |
|---|---|---|---|
| 64 | SK6805 | LED_SMD:LED_SK6805_PLCC4_2.4x2.7mm_P1.3mm | D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +48 |
| 63 | KEYSW | keyswitches:Kailh_socket_MX_p1ref | K1, K2, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23 +47 |
| 16 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D66, D67, D68, D69, D70, D71, D72, D73, D74, D75, D76, D77, D78, D79, D80, D81 |
| 8 | R_Network08_US | Resistor_THT:R_Array_SIP9 | RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8 |
| 5 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6, C7, C9, C11 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 4 | PCA9555PW | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U3, U4, U5, U6 |
| 3 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C3, C12, C16 |
| 3 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R10, R13 |
| 3 | w_2 stabilizer | Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_2.00u | DRA1, DRA2, DRA3 |
| 2 | 15K | Resistor_SMD:R_0402_1005Metric | R11, R12 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R15, R16 |
| 2 | 499R | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R14, R17 |
| 2 | NP | Resistor_SMD:R_0402_1005Metric | R4, R9 |
| 2 | w_3 stabilizer | Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_3.00u | DRA4, DRA5 |
| 1 | 0.01u | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 150K | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 2.2uH | Inductor_SMD:L_Taiyo-Yuden_MD-4040 | L1 |
| 1 | 3.3v_TVS | Diode_SMD:D_SOD-323 | D1 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 6.8p | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 680k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | ATtiny828-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U8 |
| 1 | ESP32-S3-WROOM-1 | footprints:ESP32-S3-WROOM-1 | U1 |
| 1 | SN65220 | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | TLV62569DBV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J4 |
Similar boards
- 4 layers94 × 140 mm

- 2 layers88 × 115 mm

Badge
endsummercamp/badge
Per l'anno 2024 anche l'End Summer Camp si vuole dotare di un badge interattivo e programmabile, in linea con gli eventi simili internazionali.
131 parts1CERN-OHL-P-2.0 - 2 layers188.7 × 147.5 mm

Temp sensor panel
juniper-garden/twig_temp_humidity_sensor
Hardware files for the temperature and humidity sensor
961 partsGPL-3.0 - 2 layers

Techlahoma Badge 2024
OklahomaOpenSourceHardware/OKC-OSH-2024-Badge
2024 badge for Oklahoma PCB Tech Conferences
68 parts3 - 2 layers

SelfWatteringFlowerpot
stefano-papadopolo/Selfwatering-Flower-Pots
18650 battery powered self watering flower pots with low battery alarm, low water level alarm, solar charging, moisture sensors and water pumps. Controlled by ATTiny828
30 parts - 2 layers70 × 97.7 mm

- 4 layers25.9 × 35.6 mm

- 2 layers206 × 175.5 mm

Questions
How big is the Okeeb PCB?
It measures 306.5 × 96.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Okeeb use?
202 parts, built around the ATTINY828-AU, ESP32-S3-WROOM-1-N8, TLV62569DBV and PCA9555PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Okeeb KiCad files?
From the OklahomaOpenSourceHardware/Oklahoma-Open-Hardware-Mechanical-Keyboard repository on GitHub, at the commit this page was made from: the board is okeeb.kicad_pcb and its schematic okeeb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Okeeb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).