4 layers20.6 × 42.5 mm
4 layers94 × 140 mm
A handheld version of the PlasticScanner
- Size
- 94 × 140 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 131
- Nets
- 76
- Pads
- 403
- Tracks, vias
- 515, 112
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Oct 2022
- Updated
- 27 May 2024
Overview
Power is an open-source printed circuit board by LokiMetaSmith, from the LokiMetaSmith/handheld-scanner repository on GitHub. It is a 4-layer board of 94 × 140 mm with 131 parts on 76 nets, routed with 515 tracks and 112 vias.
It is built around the ESP32-S3-WROOM-1-N8, AS7341-DLGT and NAU7802SGI, with the TLV62569DBV, SN65220DBV and BAS516 among its other parts. Its parts include 42 resistors, 26 capacitors, 18 diodes, 10 ICs and 5 transistors. It belongs with the ESP32 boards of this library.
Main components
9
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AS7341-DLGT
OLGA-8(2x3.1)-30℃~+70℃ 1.7V~2V 1mm 210uA 2mm 3.1mm Color Recognition I2C OLGA-8(2x3.1) Ambient Light Sensors ROHSAdvanced Monolithic SystemsAmbient Light Sensors
NAU7802SGI
SOP-16-40℃~+85℃ 2 2.1mA 2.7V~5.5V 24 4.9152MHz 80Hz Auto calibration、Built-in temperature sensor、Multiplexers、Power-on reset External External、Built-in I2C Sigma-Delta Support Yes SOP-16 Analog to Digital Converters (ADC) ROHSNuvoton TechAnalog To Digital Converters (ADC)
TLV62569DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.5MHz 2.5V~5.5V 2A 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
SN65220DBV
SOT-23-6-40℃~+85℃ 1 1uA 35pF 6V 7V 7V IEC 61000-4-2 TVS SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
BAS516
SOD-523Switching Diodeshongjiacheng
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
BSS138DW-7-F-ES
SOT-363-55℃~+150℃ 1.5Ω@10V、1.6Ω@4.5V 1V 2 N-Channel 2.2pF 25pF 410mA 417mW 60V 650pC@4.5V 9.7pF N-Channel SOT-363 MOSFETs ROHSElecSuperMOSFETsEAHC2835WD6
28351411 New Arrivals ROHSEverlight ElectronicsUncategorised
README
README.mdA handheld plastic identification tool
A handheld version of the PlasticScanner as a part of a master thesis at DTU
Warning This is under development and should not be reproduced before a release is published or if you want do develop it yourself.
Our mission
We believe that plastic sorting and recycling can be improved. Our handheld Plastic Scanner enhances the process by immediately identifying various plastic types. It can be used in both residential and large waste management settings.
The handheld Plastic Scanner
A compact handheld Plastic Scanner that contains a small breakout board with ADC, amplifier, LED controller and a color sensor, that can be effortlessly interfaced using the Qwiic/StemmaQT I2C connectors.
Changes from the original Plastic Scanner
The board has the following changes from the original:
- The ADC ADS1256 we interfaced SPI is exchanged for the NAU7802 ADC that we interface via I2C
- AS7341 I2C color sensor added
- 5v changed to 3.3v to comply with Qwiic/stemmaQT guidelines
Notes
- Holes are M2 holes (iso 7380)
Parts
131| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R7, R7, R8, R11, R12, R19 |
| 5 | BAS516 | Diode_SMD:D_SOD-523 | D1, D2, D3, D4, D6 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C10, C13, C20 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C11, C16, C18 |
| 4 | 150 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R26, R29, R30 |
| 4 | 240k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R9, R10 |
| 4 | 301 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R13, R14 |
| 4 | 51pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C12, C21 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R8, R18 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C15, C19 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R18, R24 |
| 2 | 0090-3111-185 | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D12 |
| 2 | 100pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C23 |
| 2 | 15K | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 240 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27, R28 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R12, R13 |
| 2 | 47nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C22 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2, Q4 |
| 2 | BC818 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3 |
| 2 | CON_JST_PH_2PIN_MTPH2 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | X1, X2 |
| 2 | G*** | kibuzzard-63988507 | kibuzzard-63988507, kibuzzard-63988507 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | H1, H2 |
| 2 | OPA2376xxD | OPA2376AID:SOIC127P599X175-8N | U1, U4 |
| 2 | STEMMA_I2C_QT | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | CONN1, CONN2 |
| 1 | 0.01u | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 1050nm | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D6 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 130 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32 |
| 1 | 1300nm | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D7 |
| 1 | 1460nm | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D8 |
| 1 | 150K | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 1550nm | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D9 |
| 1 | 1650nm | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D10 |
| 1 | 1720nm | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D11 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 2.2uH | Inductor_SMD:L_Taiyo-Yuden_MD-4040 | L1 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 1 | 2u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 3.3v_TVS | Diode_SMD:D_SOD-323 | D5 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 4.9152 MHz | Oscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | X1 |
| 1 | 40 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31 |
| 1 | 5.1k | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 56 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25 |
| 1 | 6.8p | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 680k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 855nm | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D4 |
| 1 | 940nm | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D5 |
| 1 | AP7312-1833W6-7 | AP7312-1833W6-7:AP7312-1833W6-7 | U7 |
| 1 | AS7341-DLGT | AS7341-DLGT:PSON80P310X200X110-8N | U6 |
| 1 | BSS138DW-7-F | BSS138DW-7-F-A:Diodes_Inc._-_BSS138DW-7-F-A | Q1 |
| 1 | Battery | Battery:BatteryHolder_Keystone_2460_1xAA | BT1 |
| 1 | Conn_01x02_Male | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | Conn_01x08_MountingPin | Connector_JST:JST_PH_S8B-PH-SM4-TB_1x08-1MP_P2.00mm_Horizontal | J1 |
| 1 | EAHC2835WD6 | Everlight-EAHC2835WD6:Everlight-EAHC2835WD6-MFG | D3 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1 | U1 |
| 1 | G*** | kibuzzard-639881D9 | kibuzzard-639881D9 |
| 1 | G*** | PlasticScannerLibrary:kibuzzard-6346913B | kibuzzard-6346913B |
| 1 | G*** | kibuzzard-6398DD41 | kibuzzard-6398DD41 |
| 1 | I2C | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3 |
| 1 | I2C ThroughHole | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | Interface | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1 |
| 1 | MCP73811T-420I-OT | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | NAU7802SGI | Nuvoton-NAU7802SGI:Nuvoton-NAU7802SGI | U2 |
| 1 | OSHW-Logo2_9.8x8mm_SilkScreen | Symbol:OSHW-Logo2_9.8x8mm_SilkScreen | OSH logo |
| 1 | OSHW-Logo_11.4x12mm_SilkScreen | Symbol:OSHW-Logo_11.4x12mm_SilkScreen | LOGO1 |
| 1 | POWER LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | PlasticScannerLogo | Symbol:PlasticScannerLogo | PlasticScannerLogo |
| 1 | PlasticScannerLogo | PlasticScannerLibrary:PlasticScannerLogo | LOGO2 |
| 1 | SN65220 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP2 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | JP1 |
| 1 | TLC59208FIPWR | TLC59208FIPWR:SOP65P640X120-16N | U5 |
| 1 | TLV62569DBV | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Test_1.8V | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
The 128 most common of 131 parts.
More from LokiMetaSmith/handheld-scanner
1Similar boards
- 4 layers20.6 × 42.5 mm
RoundScanner
Global-Health-Engineering/plastic-scanner
Especially for small-scale recycling facilities and projects with limited financial resources, commercial plastic scanners are extremly expensive.
79 parts3GPL-3.0 - 2 layers48.2 × 24.9 mm
Temp sensor
juniper-garden/twig_temp_humidity_sensor
Hardware files for the temperature and humidity sensor
56 partsGPL-3.0 - 2 layers306.5 × 96.9 mm
Okeeb
OklahomaOpenSourceHardware/Oklahoma-Open-Hardware-Mechanical-Keyboard
Oklahoma themed open source hardware licensed keyboard from the Oklahoma community
202 parts2GPL-3.0 - 2 layers25.4 × 17.8 mm
- 2 layers
Techlahoma Badge 2024
OklahomaOpenSourceHardware/OKC-OSH-2024-Badge
2024 badge for Oklahoma PCB Tech Conferences
68 parts3 - 4 layers177 × 118 mm
E ink picture frame
bkuhn4/e-ink-picture-frame
To make it easy for you to get started with GitLab, here's a list of recommended next steps.
110 parts - 2 layers50 × 201.2 mm
Aqi monitor
wngxp/aqi-monitor
A custom indoor air-quality monitor with particulate, carbon-dioxide, temperature, humidity, and pressure sensing; a round color display; a nine-pixel status gauge; and an optional connected backend and mobile app.
99 parts - 2 layers60 × 77.7 mm
Questions
How big is the Power PCB?
It measures 94 × 140 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Power use?
131 parts, built around the ESP32-S3-WROOM-1-N8, AS7341-DLGT, NAU7802SGI and TLV62569DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power KiCad files?
From the LokiMetaSmith/handheld-scanner repository on GitHub, at the commit this page was made from: the board is Hardware/Power/Power.kicad_pcb and its schematic Hardware/Controller/ControllerBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power design in my own project?
Its repository states no licence, so its author keeps all rights: ask LokiMetaSmith before reusing the design.