Skip to the content
12345678

AS7341-DLGT

Advanced Monolithic SystemsExtended

-30℃~+70℃ 1.7V~2V 1mm 210uA 2mm 3.1mm Color Recognition I2C OLGA-8(2x3.1) Ambient Light Sensors ROHS

Part id
ams/AS7341-DLGT
Category
Ambient Light Sensors
Package
OLGA-8(2x3.1)
Pins
8
In stock
295 at JLCPCB (C2655145)
Used on
5 open-source boards

Overview

The AS7341-DLGT is an ambient Light Sensor made by Advanced Monolithic Systems in a OLGA-8(2x3.1) package with 8 pins. -30℃~+70℃ 1.7V~2V 1mm 210uA 2mm 3.1mm Color Recognition I2C OLGA-8(2x3.1) Ambient Light Sensors ROHS.

PCBKit's library has its KiCad symbol (pimoroni-ics:AS7341, from Eagle libraries) and its footprint (pimoroni-ics:OLGA8, from Eagle libraries), ready for a KiCad board. 295 are in stock at JLCPCB (part C2655145). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1VDD3GND5PGND8SDA2SCL7INT4LDR6GPIO
pimoroni-ics:AS7341From Eagle libraries

Footprint

12345678
pimoroni-ics:OLGA8From Eagle libraries

Pinout

8
The pins of the AS7341-DLGT
PinNameType
1VDDUnspecified
2SCLUnspecified
3GNDUnspecified
4LDRUnspecified
5PGNDUnspecified
6GPIOUnspecified
7INTUnspecified
8SDAUnspecified

Open-source boards using it

5
  • 4 layers94 × 140 mmPower, the printed circuit board in 3D

    Power

    LokiMetaSmith/handheld-scanner

    A handheld version of the PlasticScanner

    131 parts5
  • 4 layers20.6 × 42.5 mmRoundScanner, the printed circuit board in 3D

    RoundScanner

    Global-Health-Engineering/plastic-scanner

    Especially for small-scale recycling facilities and projects with limited financial resources, commercial plastic scanners are extremly expensive.

    79 parts3GPL-3.0
  • 2 layers60 × 77.7 mmHard EnvSens, the printed circuit board in 3D

    Hard EnvSens

    IgorFJensen/Hard-EnvSens

    106 parts
  • 4 layers25 × 40 mmMiniParMain, the printed circuit board in 3D

    MiniParMain

    Jan-IngenHousz-Institute/miniPar

    Repository firmware for the ambit PAR meter version

    36 partsMIT
  • 2 layers48.2 × 24.9 mmTemp sensor, the printed circuit board in 3D

    Temp sensor

    juniper-garden/twig_temp_humidity_sensor

    Hardware files for the temperature and humidity sensor

    56 partsGPL-3.0

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the AS7341-DLGT?

Yes. The symbol is pimoroni-ics:AS7341 and the footprint pimoroni-ics:OLGA8, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AS7341-DLGT?

OLGA-8(2x3.1), with 8 pins. Its footprint is drawn on this page.

Where is the AS7341-DLGT datasheet?

Advanced Monolithic Systems publishes it: the Datasheet link on this page opens it.

Where can I order the AS7341-DLGT?

JLCPCB lists it as part C2655145, with 295 in stock; the sellers' links on this page open their listings.

What can replace the AS7341-DLGT?

Parts like it in the library: the AS7341-DLGM by Advanced Monolithic Systems and the AS7341-DLGM by OSRAM Opto Semicon. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AS7341-DLGT?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.