Skip to the content
2 layers60 × 77.7 mmHard EnvSens, the printed circuit board in 3D
Size
60 × 77.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
106
Nets
77
Pads
339
Tracks, vias
926, 465
Pours
21
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 Nov 2025
Updated
9 Oct 2026

Overview

Hard EnvSens is an open-source printed circuit board by IgorFJensen, from the IgorFJensen/Hard-EnvSens repository on GitHub. It is a 2-layer board of 60 × 77.7 mm with 106 parts on 77 nets, routed with 926 tracks and 465 vias.

It is built around the ESP32-C6-WROOM-1-N8, AS7341-DLGT and DPS368, with the SGP41-D-R4, SHT40-AD1B-R2 and VEML7700-TR among its other parts. Its parts include 38 capacitors, 23 resistors, 12 ICs, 7 connectors and 6 diodes. It belongs with the ESP32 and RISC-V boards of this library.

Main components

12

Parts

106
QtyValueFootprintReferences
9100nFCapacitor_SMD:C_0603_1608MetricC2, C12, C16, C18, C19, C23, C30, C31, C32
9TestPointTestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm1V8, 3V3, 3V3Sensor1, 5vBoost1, 5vUSB1, Battery1, GND1, RX1, TX1
810uFCapacitor_SMD:C_0603_1608MetricC1, C4, C5, C13, C22, C28, C29, C36*1
622uFCapacitor_SMD:C_0603_1608MetricC8, C9, C10, C25, C26, C27
510kResistor_SMD:R_0603_1608MetricR1, R2, R8, R14, R32*1
51uFCapacitor_SMD:C_0603_1608MetricC3, C7, C14, C15, C33
30.1uFCapacitor_SMD:C_0603_1608MetricC20, C34, C40
30RResistor_SMD:R_0603_1608MetricR17, R18, R30*1
3CMS30I30ADiode_SMD:D_SMAD5, D6, D7
3SW_Pushlibs:Botao KH-6X6X5H-STMSW1, SW2, SW3
210nFCapacitor_SMD:C_0603_1608MetricC17, C38
212kResistor_SMD:R_0603_1608MetricR6, R19
21kResistor_SMD:R_0603_1608MetricR13, R21
24.7kResistor_SMD:R_0603_1608MetricR4, R5
24.7uFCapacitor_SMD:C_0603_1608MetricC6, C24
25.11kResistor_SMD:R_0603_1608MetricR11, R12
2Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4, J7*1
2LEDLED_SMD:LED_0603_1608MetricD3, D4
2SS8050Package_TO_SOT_SMD:SOT-23Q1, Q2
10.01uFCapacitor_SMD:C_0603_1608MetricC21
10.5RResistor_SMD:R_0603_1608MetricR16
1100KResistor_SMD:R_0603_1608MetricR7
1100kResistor_SMD:R_0603_1608MetricR20*1
1100uFCapacitor_SMD:C_Elec_6.3x7.7C39
110RResistor_SMD:R_0603_1608MetricR9
11nFCapacitor_SMD:C_0603_1608MetricC35
11uHInductor_SMD:L_TechFuse_SL0630L1
12RResistor_SMD:R_0603_1608MetricR15
14.7RResistor_SMD:R_0603_1608MetricR3
14kResistor_SMD:R_0603_1608MetricR31*1
1AS7341-DLGTPackage_LGA:AMS_OLGA-8_2x3.1mm_P0.8mmU8
1BMI160Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mmU10
1Conn_01x02_PinConnector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalJ6
1Conn_01x04_SocketConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ2
1Conn_02x02_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ3
1Conn_02x02_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_VerticalJ5
1DPS368libs:LGA8S145X65P2X4_200X250X110-VU5
1ESP32-C6-WROOM-1libs:XCVR_ESP32-C6-WROOM-1-N8U2
1ICS-43434Sensor_Audio:InvenSense_ICS-43434-6_3.5x2.65mmMK1
1IP5306libs:SOP127P600X165-9NU3
1LOGOImages:labtelG***
1LOGOImages:2solveG***
1LOGOImages:hanzeG***
1LOGOImages:fapesG***
1SGP41-D-R4libs:XDCR_SGP41-D-R4U6
1SHT40-AD1B-R2libs:SHT4XU7
1SP0503BAHTPackage_TO_SOT_SMD:SOT-143D2
1SPX3819M5-L-3-3Package_TO_SOT_SMD:SOT-23-5U13
1TP4056-42-ESOP8Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalViasU12*1
1TPS22918TDBVRQ1libs:SOT95P280X145-6NU11
1TPS79318DBVTG4libs:SOT95P280X145-5NU9
1TYPE-C-31-M-12libs:HRO_TYPE-C-31-M-12J1
1VEML7700-TRlibs:XDCR_VEML7700-TRU4

Similar boards

  • 4 layers65 × 56 mmSensor HAT, the printed circuit board in 3D

    Sensor HAT

    Eniemooo/Sensor-HAT

    Open-hardware indoor air sensor (CO2, VOC/NOx, T/RH, light, sound): HAT for Raspberry Pi or standalone with Seeed XIAO + ESPHome. KiCad 10.

    112 parts
  • 4 layersCanSat, the printed circuit board in 3D

    CanSat

    budabalint/T.E.E.M.O

    113 parts
  • 2 layers145 × 90 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    8 parts
  • 2 layers19.5 × 31.5 mmSGP41 OLEDsm, the printed circuit board in 3D

    SGP41 OLEDsm

    RonHeg/SGP41_OLED_SuperMini

    Air Temperature Humidity NOx VOC Pressure sensor PCB

    24 partsMIT
  • 4 layers94 × 140 mmPower, the printed circuit board in 3D

    Power

    LokiMetaSmith/handheld-scanner

    A handheld version of the PlasticScanner

    131 parts5
  • 4 layers20.6 × 42.5 mmRoundScanner, the printed circuit board in 3D

    RoundScanner

    Global-Health-Engineering/plastic-scanner

    Especially for small-scale recycling facilities and projects with limited financial resources, commercial plastic scanners are extremly expensive.

    79 parts3GPL-3.0
  • 4 layers25 × 40 mmMiniParMain, the printed circuit board in 3D

    MiniParMain

    Jan-IngenHousz-Institute/miniPar

    Repository firmware for the ambit PAR meter version

    36 partsMIT
  • 2 layers48.2 × 24.9 mmTemp sensor, the printed circuit board in 3D

    Temp sensor

    juniper-garden/twig_temp_humidity_sensor

    Hardware files for the temperature and humidity sensor

    56 partsGPL-3.0

Questions

How big is the Hard EnvSens PCB?

It measures 60 × 77.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Hard EnvSens use?

106 parts, built around the ESP32-C6-WROOM-1-N8, AS7341-DLGT, DPS368 and SGP41-D-R4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hard EnvSens KiCad files?

From the IgorFJensen/Hard-EnvSens repository on GitHub, at the commit this page was made from: the board is _backup_libs_antigas/Hard-EnvSens.kicad_pcb and its schematic Hard-EnvSens.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hard EnvSens design in my own project?

Its repository states no licence, so its author keeps all rights: ask IgorFJensen before reusing the design.