DFN-6(2.4x2.4)

SGP41-D-R4

Sensirion

DFN-6(2.4x2.4) VOC Sensors ROHS

Extended

Datasheetsensirion/SGP41-D-R4

Category: VOC Sensors
Package: DFN-6(2.4x2.4)
Pins: 7

Overview

The SGP41-D-R4 is a VOC Sensor made by Sensirion in a DFN-6(2.4x2.4) package with 7 pins. DFN-6(2.4x2.4) VOC Sensors ROHS.

PCBKit's library has its KiCad symbol (corpus:SGP41-D-R4_5b7e95f3, from open boards on GitHub), ready for a KiCad board. 2,284 are in stock at JLCPCB (part C3659325). 38 open-source boards in 33 repositories on GitHub use it.

Symbol

corpus:SGP41-D-R4_5b7e95f3From open boards on GitHub

Footprint

The library has no footprint for this part yet.

From the datasheet

Supply, least: 1.7 V · VDD, VDDH, recommended operating minimum · p. 5
Supply, most: 3.6 V · VDD, VDDH, recommended operating maximum · p. 5
Supply, absolute maximum: 3.6 V · VDD, absolute maximum · p. 7
Works from: -10 °C · Recommended operating temperature minimum · p. 6
Works up to: 50 °C · Recommended operating temperature maximum · p. 6
Takes working: 3 mA · Typical VOC+NOx measurement current at VDD, VDDH = 3.3 V · p. 5
Takes asleep: 34 µA · Typical idle current at 3.3 V · p. 5

What it is and has

Sensor technology: MOx gas sensor for air quality applications · p. 1
Measurements: VOC and NOx · p. 1
Interface: I2C with digital output signals · p. 1
Package: 6-pin DFN, 2.44 x 2.44 x 0.85 mm3 · p. 1
Packaging: Tape and reel, reflow solderable · p. 1
Compliance: RoHS, REACH, Halogen-free, WEEE · p. 8

Around it

cap 1 F: between VDDH and VSS; Recommended hotplate supply decoupling; required decoupling depends on the supply network. · p. 7
res 10 k: between SDA and VDD; Example pull-up value; size according to bus capacitance and communication frequency. · p. 7

Specifications

Parameter	Conditions	As printed	Page
Supply voltage, hotplate supply voltage9 VDD, VDDH	VDD and VDDH connected to the same power supply	min 1.7 · typ 3.3 · max 3.6 V	5
Idle current IDD	25 °C, 3.3 V; after power-up, heater-off command, or soft reset	typ 34 · max 105 A	5
Supply current during conditioning mode10	25 °C; continuously operated at VDD, VDDH = 1.8 V; average current	typ 6.5 · max 7.2 mA	5
Supply current during conditioning mode10	25 °C; continuously operated at VDD, VDDH = 3.3 V; average current	typ 4.2 · max 4.6 mA	5
Supply current during VOC+NOx measurement mode10	25 °C; continuously operated at VDD, VDDH = 1.8 V; average current	typ 4.3 · max 4.8 mA	5
Supply current during VOC+NOx measurement mode10	25 °C; continuously operated at VDD, VDDH = 3.3 V; average current	typ 3 · max 3.4 mA	5
Power-up time tPU	After hard reset, VDD ≥ VPOR	typ 0.4 · max 0.6 ms	5
Soft reset time tSR	After soft reset	typ 0.4 · max 0.6 ms	5
SCL clock frequency fSCL		max 400 kHz	5
Relative humidity	Operating conditions	min 0 · max 90 % RH	6
Temperature	Operating conditions	min -10 · max 50 °C	6
Humidity	Operating conditions of humidity compensation; dew points −13 °C and +31 °C at the respective limits; maximum is the smaller of 30 g m−3 and 90 % RH	min 1.5 · max 30 g m−3 (°C dew point)	6
Humidity	Operating conditions of humidity compensation; maximum is the smaller of 30 g m−3 and 90 % RH	max 90 % RH	6
Temperature	Operating conditions of humidity compensation	min -10 · max 50 °C	6
Relative humidity	Storage conditions	min 0 · max 80 % RH	6
Temperature	Storage conditions	min 5 · max 30 °C	6
Supply voltage VDD VDD		min -0.3 · max 3.6 V	7
Supply voltage VDDH VDDH		min -0.3 · max 3.6 V	7
Short-term storage temperature range11	Temporary conditions during, e.g., transport	min -40 · max 70 °C	7
Operating temperature range		min -20 · max 55 °C	7
Short-term storage humidity range12	Non-condensing	min 0 · max 80 %	7
Operating humidity range	Non-condensing	min 0 · max 90 %	7
ESD HBM		max 2 kV	7
ESD CDM		max 500 V	7
Latch up, JESD78 Class II, 125 °C	JESD78 Class II, 125 °C	max 100 mA	7

Pins, by the datasheet

1 VDD: Supply voltage. · p. 7
2 VSS: Ground. · p. 7
3 SDA: Serial data, bidirectional. · p. 7
4 n/a: Connect to ground; no electrical function. · p. 7
5 VDDH: Supply voltage, hotplate. · p. 7
6 SCL: Serial clock, bidirectional. · p. 7

Parameters

Current - Supply: 3mA
Operating Temperature: -10℃~+50℃
Standby Current: 34uA
Voltage - Supply: 1.7V~3.6V
Voltage - Supply(Absolute Max): 3.6V

Order codes

SGP41-D-R4LCSC C3659325

Pinout

The pins of the SGP41-D-R4
Pin	Name	Type
1	VDD	Unspecified
2	VSS	Unspecified
3	SDA	Unspecified
4	n/a	Unspecified
5	VDDH	Unspecified
6	SCL	Unspecified
7	EP	Unspecified

Open-source boards using it

All 38

4 layers100 × 75 mm
OpenAirScope
emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
282 parts26MIT
4 layers75 × 56.4 mm
Esp32-c6-wroom1 board
pushtiujeniya/esp32-c6-environmental-logger
This repository contains an Environmental Sensor Station and Data Logger powered by the ESP32-C6-WROOM-1 microcontroller.
59 parts4
2 layers40 × 98 mm
Airquality
LukasLendvorsky/airquallity-esphome
WIFI airquality sensor with ESP32
59 parts3GPL-3.0
2 layers40 × 27 mm
Sensor board voc temp
adamvirovecz/sensor-board-voc-temp
VOC, Humidity and Temperature Sensor Board
39 parts1MIT
4 layers62.9 × 88.3 mm
Airgradient go main
Open-Air-Foundation/pcb-go
AirGradient GO is a handheld air quality monitor. It measures particulate matter (Sensirion SPS30), CO₂ (Senseair S12), VOC/NOx (SGP41), temperature and humidity (SHT4x), and barometric pressure (DPS368), with an…
194 parts1CC-BY-SA-4.0
2 layers75 × 75 mm
Air quality pcb
aleemacc/air_quality_sensor
PCB design for a custom air quality measuring device
30 parts
6 layers60 × 100 mm
Senseboard
CPSLO-AI-Campus-Fire-Detection/senseboard
PCB for sensor stack and compute for fire detection system
109 partsAGPL-3.0
2 layers7.2 × 41.9 mm
Sensor puck
david072/sensor_puck

60 parts