4 layers75 × 56.4 mm
Esp32-c6-wroom1 board
pushtiujeniya/esp32-c6-environmental-logger
This repository contains an Environmental Sensor Station and Data Logger powered by the ESP32-C6-WROOM-1 microcontroller.
59 parts4
2 layers7.2 × 41.9 mm
Sensor puck
david072/sensor_puck- Size
- 7.2 × 41.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 61
- Pads
- 282
- Tracks, vias
- 491, 67
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Nov 2024
- Updated
- 8 Apr 2025
Overview
Sensor puck is an open-source printed circuit board by david072, from the david072/sensor_puck repository on GitHub. It is a 2-layer board of 7.2 × 41.9 mm with 60 parts on 61 nets, routed with 491 tracks and 67 vias.
It is built around the ESP32-S3-MINI-1U-N8, LIS2MDL and SGP41-D-R4, with the RT9013-30B and SCD41-D-R2 among its other parts. Its parts include 17 capacitors, 15 resistors, 7 ICs, 4 connectors and 2 switches. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
Main components
5
ESP32-S3-MINI-1U-N8
VFQFN-56-EP-40℃~+105℃ -98.4dBm 1.8V~3.6V、3V~3.6V 2.4GHz 21dBm 340mA 88mA Bluetooth5.0 ESP32-S3 UART、SDIO、SPI、I2C、I2S、JTAG、USB VFQFN-56-EP WiFi Modules ROHSEspressif SystemsWiFi Modules
LIS2MDL
LGA-12(2x2)-40℃~+85℃ 1.71V~3.6V 16bit 200uA I2C、SPI ±5mT ±5mT LGA-12(2x2) 3D Magnetic Sensors ROHSSTMicroelectronics3D Magnetic SensorsSGP41-D-R4
DFN-6(2.4x2.4)DFN-6(2.4x2.4) VOC Sensors ROHSSensirionVOC Sensors
RT9013-30B
SOT23-5SOT23-5 New Arrivals ROHSRichtek TechUncategorised
SCD41-D-R2
LGA-20UncategorisedSensirion
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R7, R8, R10, R12, R15, R16, R17 |
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C6, C8, C9, C12, C13, C18, C19, C20 |
| 3 | 5k11 | Resistor_SMD:R_0805_2012Metric | R5, R6, R11 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C10, C21 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 1uF/X7R | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 1 | 220nF | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 4R7 | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | Buzzer | Buzzer_Beeper:CMT-7525-80-SMT-TR | BZ1 |
| 1 | Conn_01x02_Socket | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J6 |
| 1 | D | Diode_SMD:D_0805_2012Metric | D1 |
| 1 | D+ | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | D- | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | DISP LEFT | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | DISP RIGHT | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | EN | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | ESP32-S3-MINI-1U | RF_Module:ESP32-S2-MINI-1U | U1 |
| 1 | IO0 | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | LIS2MDL | Package_LGA:LGA-12_2x2mm_P0.5mm | U7 |
| 1 | LSM6DSOXTR | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U3 |
| 1 | LSM_SA0 | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2 |
| 1 | MTCK | TestPoint:TestPoint_Pad_D1.0mm | TP16 |
| 1 | MTDI | TestPoint:TestPoint_Pad_D1.0mm | TP18 |
| 1 | MTDO | TestPoint:TestPoint_Pad_D1.0mm | TP17 |
| 1 | MTMS | TestPoint:TestPoint_Pad_D1.0mm | TP19 |
| 1 | RST | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | RT9013 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | RXD0 | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | SCD41-D-R2 | Sensor:Sensirion_SCD4x-1EP_10.1x10.1mm_P1.25mm_EP4.8x4.8mm | U8 |
| 1 | SGP41-D-R4 | SGP41-D-R4:XDCR_SGP41-D-R4 | U4 |
| 1 | ST25DV16K-IER8C3 | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.36x1.46mm | U2 |
| 1 | TBD | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | L1 |
| 1 | TXD0 | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J3 |
Questions
How big is the Sensor puck PCB?
It measures 7.2 × 41.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensor puck use?
60 parts, built around the ESP32-S3-MINI-1U-N8, LIS2MDL, SGP41-D-R4 and RT9013-30B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor puck KiCad files?
From the david072/sensor_puck repository on GitHub, at the commit this page was made from: the board is pcb/sensor_puck.kicad_pcb and its schematic pcb/sensor_puck.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor puck design in my own project?
Its repository states no licence, so its author keeps all rights: ask david072 before reusing the design.
Similar boards
- 2 layers75 × 75 mm
Air quality pcb
aleemacc/air_quality_sensor
PCB design for a custom air quality measuring device
30 parts - 6 layers60 × 100 mm
Senseboard
CPSLO-AI-Campus-Fire-Detection/senseboard
PCB for sensor stack and compute for fire detection system
109 partsAGPL-3.0 - 4 layers65 × 56 mm
Sensor HAT
Eniemooo/Sensor-HAT
Open-hardware indoor air sensor (CO2, VOC/NOx, T/RH, light, sound): HAT for Raspberry Pi or standalone with Seeed XIAO + ESPHome. KiCad 10.
112 parts - 4 layers25.5 × 62.8 mm
- 4 layers60 × 80 mm
Wisp
huulanka/wisp
Open-source ESP32 room climate monitor — CO2, VOC, humidity, temperature and light sensing with custom PCB, MQTT/HomeKit integration, and OTA firmware updates. Full hardware + software, from schematic to BOM.
91 partsMIT - 2 layers49 × 50.4 mm
- 4 layers60 × 60 mm
Ummon
JonaWe/ummon
ummon (from German Umgebungsmonitor, "environment monitor") is an ESP32-C6 based environmental sensor board with USB-C power.
95 parts