4 layers120 × 50 mm
4 layers61.8 × 79.6 mm
Shipwrecked pcb
mpkendall/shipwrecked-pcb17Shipwrecked PCB Badges
- Size
- 61.8 × 79.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 153
- Nets
- 116
- Pads
- 509
- Tracks, vias
- 1,325, 388
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 May 2025
- Updated
- 9 Aug 2025
Overview
Shipwrecked pcb is an open-source printed circuit board by mpkendall, from the mpkendall/shipwrecked-pcb repository on GitHub, published under the Unlicense licence. It is a 4-layer board of 61.8 × 79.6 mm with 153 parts on 116 nets, routed with 1,325 tracks and 388 vias.
It is built around the RP2040, PE4259-63 and SX1262IMLTRT, with the TPS61200DRC, W25Q128JVSIQ and AMS1117-3.3V among its other parts. Its parts include 43 capacitors, 35 connectors, 19 switches, 16 resistors and 7 ICs. It belongs with the RP2040 boards of this library.
Main components
12
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
PE4259-63
SC-70-6-40℃~+85℃ 0.35dB 1.8V~3.3V 10MHz~3GHz 30dB 33.5dBm Integrated control logic SPDT SC-70-6 RF Switches ROHSpSemiRF Switches
SX1262IMLTRT
QFN-24-EP(4x4)-148dBm -40℃~+85℃ 1.8V~3.7V 150MHz~960MHz 22dBm 300Kbps 32mA 4.2mA ISM SPI Supports software reset、Power-on reset function、Supports RSSI function transceiver QFN-24-EP(4x4) RF Transceiver ICs ROHSSEMTECHRF Transceiver ICs
TPS61200DRC
VSON-10-EP(3x3)-40℃~+125℃@(TJ) 1 1.65MHz 1.8V~5.5V 300mV~5.5V Adjustable Boost Boost Built-in Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
AMS1117-3.3V
SOT-223-20℃~+85℃ 1 1.2A 1.5V@(800mA) 15V 3.3V 5mA Fixed Positive Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PCA9555PW
TSSOP-24-40℃~+85℃ 1.1uA 16 2.3V~5.5V 3mA 400kHz 8 I2C、SMBus Interrupt Output Reset function、Cascade and address expansion TSSOP-24 I/O Expanders ROHSNXP SemiconductorsI/O Expanders
SH-6X6X4.3H-CJ
DIP-4P,6x6mm-25℃~+70℃ 100,000 cycles 12V 2.5N 4.3mm 50mA 6mm 6mm Black No PC Pin Round Button SPST Through Hole Without Bracket DIP-4P,6x6mm Tactile Switches ROHSSHOU HANTactile Switches
CC0603KRX7R9BB104
0603100nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
RC0603FR-0710KL
UncategorisedUnknown maker
MBR0530T1G
SOD-123Schottky DiodesFUXINSEMICC0603JRNPO9BN150
060315pF 50V NP0 ±5% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
README
README.mdParts
153| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | Conn_01x01 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J3, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23, J24, J25, J26, J28, J29 +14 |
| 16 | Clicky - THT | Button_Switch_THT:SW_PUSH_6mm | SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18 |
| 13 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5, C6, C7, C8, C9, C10, C11, C12, C56, C65, C66 |
| 11 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C15, C16, C17, C18, C19, C20, C23, C26, C52 |
| 6 | 10uF | Capacitor_SMD:C_0603_1608Metric | C51, C53, C54, C55, C60, C61 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R20, R21, R22 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123 | D2, D3, D4 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | C13, C14 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric | R9, R18 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R7 |
| 2 | 27.4 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 3.3pF | Capacitor_SMD:C_0603_1608Metric | C68, C69 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C21, C22 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 8pF | Capacitor_SMD:C_0603_1608Metric | C24, C25 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 0900FM15D0039 | RF_Converter:Balun_Johanson_0900FM15K0039 | FL1 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 10uH | Inductor_SMD:L_APV_ANR4018 | L1 |
| 1 | 15uH | Inductor_SMD:L_0805_2012Metric | L11 |
| 1 | 180k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C64 |
| 1 | 2.2 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 2.2uH | Inductor_SMD:L_Taiyo-Yuden_NR-30xx | L9 |
| 1 | 2x AA | Battery:BatteryHolder_Keystone_2462_2xAA | BT1 |
| 1 | 32MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 39pF | Capacitor_SMD:C_0603_1608Metric | C63 |
| 1 | 470nF | Capacitor_SMD:C_0603_1608Metric | C67 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric | C57 |
| 1 | 47nH | Inductor_SMD:L_0603_1608Metric | L10 |
| 1 | 47pF | Capacitor_SMD:C_0603_1608Metric | C62 |
| 1 | 9.1nH | Inductor_SMD:L_0603_1608Metric | L12 |
| 1 | A0 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | A1 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | A2 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | Antenna | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | AE1 |
| 1 | B2B Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J9 |
| 1 | B2B Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J8 |
| 1 | BLM18AG601SN1D | Resistor_SMD:R_0603_1608Metric | FB1 |
| 1 | BOOTSEL | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_D14mm_H7mm_P10mm | BZ1 |
| 1 | D | Diode_SMD:D_SOD-123F | D1 |
| 1 | G*** | kibuzzard-687A9DB2 | kibuzzard-687A9DB2 |
| 1 | G*** | kibuzzard-6878653F | kibuzzard-6878653F |
| 1 | G*** | kibuzzard-68786588 | kibuzzard-68786588 |
| 1 | G*** | kibuzzard-68786528 | kibuzzard-68786528 |
| 1 | G*** | kibuzzard-687ADB8B | kibuzzard-687ADB8B |
| 1 | G*** | kibuzzard-687865CB | kibuzzard-687865CB |
| 1 | G*** | kibuzzard-68786508 | kibuzzard-68786508 |
| 1 | G*** | kibuzzard-6878659A | kibuzzard-6878659A |
| 1 | G*** | kibuzzard-687A9D67 | kibuzzard-687A9D67 |
| 1 | G*** | kibuzzard-687864C4 | kibuzzard-687864C4 |
| 1 | LED | LED_THT:LED_D5.0mm | D5 |
| 1 | PCA9555PW | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U7 |
| 1 | PE4259 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U3 |
| 1 | PWR Switch | Button_Switch_SMD:SW_SPDT_PCM12 | SW19 |
| 1 | RESET | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SWD | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | SX1262IMLTRT | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U8 |
| 1 | Si1308EDL | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | TPS61200DRC | Package_SON:Texas_S-PVSON-N10_ThermalVias | U4 |
| 1 | USB4105 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | Waveshare 1.54" E-Ink | Connector_FFC-FPC:TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal | J2 |
Similar boards
- 4 layers101.6 × 53.3 mm
H730duino
martinribelotta/h730duino
STM32H7 Arduino form factor and software compatible board
111 parts47MIT - 4 layers101.6 × 53.3 mm
- 2 layers58.7 × 53.7 mm
CW312T ATSAM4L
jmercerr/CW312T-ATSAM4L
design transfer project from cw308t to cw312t form for ATSAM4L target board
30 parts - 4 layers48.8 × 107.9 mm
- 4 layers198.4 × 104.3 mm
DC33
Maritime-Hacking-Village/Badge-2025
Public repository for the official MHV 2025 badge.
200 parts15CERN-OHL-W-2.0 - 4 layers138 × 114 mm
- 4 layers106 × 100 mm
POE POWER
ssmo-oss/UMI-Power-distribution
Three separate boards distribute a 12 V supply to the UMI system. D6 is the current prototype revision. It has not been physically qualified or approved for production.
60 parts
Questions
How big is the Shipwrecked pcb PCB?
It measures 61.8 × 79.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Shipwrecked pcb use?
153 parts, built around the RP2040, PE4259-63, SX1262IMLTRT and TPS61200DRC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shipwrecked pcb KiCad files?
From the mpkendall/shipwrecked-pcb repository on GitHub, at the commit this page was made from: the board is PCB-Schematic/shipwreckedpcb/shipwreckedpcb.kicad_pcb and its schematic PCB-Schematic/shipwreckedpcb/shipwreckedpcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shipwrecked pcb design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).