Mlab KiCad

37 boards

KiCad boards from 37 GitHub repositories tagged “mlab-kicad”, the most starred first; open any of them in PCBKit.

2 layers50.3 × 40.1 mm
DRV10987V01
mlab-modules/DRV10987V01
Sensorless driver of BLDC and PMSM motors based on DRV10987 controller.
30 parts7
2 layers50.3 × 40.1 mm
VLFANT01B
mlab-modules/VLFANT01
VLF antenna connection module
9 parts6
2 layers136.2 × 85.9 mm
BATDATUNIT01
mlab-modules/BATDATUNIT01
Multiple parallel Li-ion 18650 battery cell module with BMS and data storage with MCU control.
225 parts5GPL-3.0
2 layers60.5 × 40.1 mm
PCRD04B
mlab-modules/PCRD04
Silicon PIN diode cosmic radiation detector
62 parts4GPL-3.0
2 layers70.6 × 70.6 mm
ADCoctoSPI01
mlab-modules/ADCoctoSPI01
Octal input high-speed ADC with serial LVDS output.
80 parts3GPL-3.0
2 layers40.1 × 19.8 mm
ALTIMET02
mlab-modules/ALTIMET02
High-accuracy barometric pressure and temperature sensing module with MS561101BA03.
17 parts2GPL-3.0
2 layers19.8 × 30 mm
FRAM01
mlab-modules/FRAM01
8 Mbit FRAM (CY15B108QN) fast data write, low power consumption, and high radiation resistance data storage
12 parts2GPL-3.0
2 layers40.1 × 30 mm
LIGHTNING01
mlab-modules/LIGHTNING01
Lightning sensor module based on AS3935 Franklin Lightning Sensor IO. Sensor can be connected via I2C or SPI bus.
33 parts2
2 layers80.8 × 60.5 mm
LION2CELL01
mlab-modules/LION2CELL01
Dual-cell Li-Ion Battery management system.
100 parts2GPL-3.0
2 layers40.1 × 40.1 mm
SOLARMINI01B
mlab-modules/SOLARMINI01
Small low-power MPPT module for photovoltaic cells.
28 parts2GPL-3.0
2 layers50.3 × 30 mm
ISM02
mlab-modules/ISM02
ISM RF module with LoRa network capability
55 parts1GPL-3.0
2 layers70.6 × 90.9 mm
ISO11446PWR01
mlab-modules/ISO11446PWR01
Car trailer emulator for use trailer socket as a power source
70 parts1GPL-3.0
2 layers50.3 × 30 mm
PCRD01
mlab-modules/PCRD01
Semiconductor cosmic radiation detector Silicon diode interface.
39 parts1GPL-3.0
2 layers50.3 × 40.1 mm
PCRD06
mlab-modules/PCRD06
Sample and hold circuit for photomultiplier pulse signal processig
33 parts1GPL-3.0
2 layers24.1 × 50.3 mm
PINHOLDER01
mlab-modules/PINHOLDER01
Board for mounting thick semiconductor diodes into existing devices.
5 parts1GPL-3.0
2 layers60.5 × 40.1 mm
PROGLOG01
mlab-modules/PROGLOG01
Small low-power open-source toolchain compatible FPGA
66 parts1
2 layers60.5 × 50.3 mm
RFIQINT01B
mlab-modules/RFIQINT01
UTP cable RF signal I/Q interface for QFHMIX module with punch-down blocks
48 parts1GPL-3.0
2 layers19.8 × 40.1 mm
STEPUPDC02
mlab-modules/STEPUPDC02
Step-up converter. Vin 1,8 V - 5 V, Vout up to 28 V.
18 parts1GPL-3.0
2 layers40.1 × 19.8 mm
TTLLVDS01
mlab-modules/TTLLVDS01
TTL to LVDS translating module.
17 parts1GPL-3.0
2 layers30 × 40.1 mm
ACOMP01
mlab-modules/ACOMP01
Fast analog comparator module
20 partsGPL-3.0
2 layers40.1 × 40.1 mm
AMUX01
mlab-modules/AMUX01
Four-channel analog multiplexer with single-sided output
20 partsGPL-3.0
2 layers23.6 × 85.9 mm
BATDATSOCKET01
mlab-modules/BATDATSOCKET01
Adapter for fast battery and data storage connection. Compatible with BATDATUNIT01
15 partsGPL-3.0
2 layers60.5 × 40.1 mm
BP02
mlab-modules/BP02
Symmetrical RF filter module with SATA connector input/output
38 partsGPL-3.0
2 layers40.1 × 40.1 mm
BRIDGEADC01
mlab-modules/BRIDGEADC01
Strain Gauges analog front end and ADC
44 partsGPL-3.0