2 layers66.9 × 74.5 mm
2 layers40.1 × 40.1 mm
AMUX01
mlab-modules/AMUX01Four-channel analog multiplexer with single-sided output
- Size
- 40.1 × 40.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 10
- Pads
- 56
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 9 Feb 2023
- Updated
- 11 Jul 2024
Overview
AMUX01 is an open-source printed circuit board by mlab-modules, from the mlab-modules/AMUX01 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 40.1 × 40.1 mm with 20 parts on 10 nets.
It is built around the MAX4734EUB+. Its parts include 9 connectors, 3 resistors, 2 capacitors, 1 IC and 1 diode.
Main components
1README
README.mdAMUX01 - four channel analog multiplexer
A simple module based on the MAX4734. The MAX4734 has 4 analog channels, controlled by signals A0, A1 and EN. Supports power supply and signals in the range of 1.6-3.6 V.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | HEADER_1x03 | Mlab_Pin_Headers:Straight_1x03 | J2, J3, J4, J5 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 3 | HEADER_1x02 | Mlab_Pin_Headers:Straight_2x01 | J7, J8, J9 |
| 2 | HOLE | Mlab_Mechanical:MountingHole_3mm | M3, M4 |
| 2 | HOLE M3 | Mlab_Mechanical:MountingHole_3mm | M1, M2 |
| 1 | 1.6 V to 3.6V | Mlab_Pin_Headers:Straight_2x03 | J1 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | BZV55C-5,6V | Diode_SMD:D_SMA | D1 |
| 1 | HEADER_2x03_PARALLEL | Mlab_Pin_Headers:Straight_2x03 | J6 |
| 1 | MAX4734EUB+ | Package_SO:MSOP-10_3x3mm_P0.5mm | U1 |
Questions
How big is the AMUX01 PCB?
It measures 40.1 × 40.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AMUX01 use?
20 parts, built around the MAX4734EUB+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AMUX01 KiCad files?
From the mlab-modules/AMUX01 repository on GitHub, at the commit this page was made from: the board is hw/sch_pcb/AMUX01.kicad_pcb and its schematic hw/sch_pcb/AMUX01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AMUX01 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772