2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0
2 layers40.1 × 30 mm
LIGHTNING01
mlab-modules/LIGHTNING012Lightning sensor module based on AS3935 Franklin Lightning Sensor IO. Sensor can be connected via I2C or SPI bus.
- Size
- 40.1 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 13
- Pads
- 81
- Tracks, vias
- 190, 34
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 25 May 2023
- Updated
- 16 Sep 2023
Overview
LIGHTNING01 is an open-source printed circuit board by mlab-modules, from the mlab-modules/LIGHTNING01 repository on GitHub. It is a 2-layer board of 40.1 × 30 mm with 33 parts on 13 nets, routed with 190 tracks and 34 vias.
Its parts include 10 resistors, 10 connectors, 6 capacitors, 1 IC and 1 diode. It belongs with the sensors and measurement boards of this library.
README
README.mdLIGHTNING01A
Digital lightning sensor
Lightning sensor module based on AS3935 Franklin Lightning Sensor IO. Sensor can be connected via I2C or SPI bus.
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | JUMP_2x1 | Mlab_Pin_Headers:Straight_2x01 | J2, J3, J4, J5, J6, J7, J8, J9 |
| 4 | 0R | Mlab_R:SMD-0805 | R3, R7, R8, R9 |
| 4 | 10k | Mlab_R:SMD-0805 | R1, R2, R5, R10 |
| 4 | HOLE | Mlab_Mechanical:MountingHole_3mm | M1, M2, M3, M4 |
| 2 | - | Mlab_R:SMD-0805 | R4, R6 |
| 1 | 100nF | Mlab_R:SMD-0805 | C6 |
| 1 | 10uF | Mlab_R:SMD-0805 | C3 |
| 1 | 10uF/10V | Mlab_R:SMD-0805 | C5 |
| 1 | 1uF | Mlab_R:SMD-0805 | C4 |
| 1 | 270pF | Mlab_R:SMD-0805 | C2 |
| 1 | 650pF | Mlab_R:SMD-0805 | C1 |
| 1 | AS3935 | Mlab_IO:MLPQ-16 | U1 |
| 1 | JUMP2_2x1 | Mlab_Pin_Headers:Straight_2x01 | J1 |
| 1 | JUMP_3X2 | Mlab_Pin_Headers:Straight_2x03 | J10 |
| 1 | M4 | Mlab_D:Diode-MELF_Standard | D1 |
| 1 | MA55532-AE | Mlab_L:Coilcraft_MA5532-AE_RFID | L1 |
Questions
How big is the LIGHTNING01 PCB?
It measures 40.1 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LIGHTNING01 use?
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LIGHTNING01 KiCad files?
From the mlab-modules/LIGHTNING01 repository on GitHub, at the commit this page was made from: the board is hw/sch_pcb/LIGHTNING01.kicad_pcb and its schematic hw/sch_pcb/LIGHTNING01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LIGHTNING01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask mlab-modules before reusing the design.
Similar boards
- 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm
