6 layers31.7 × 110 mm
Eurorack pmod pcb
apfaudio/eurorack-pmod
A eurorack-friendly audio frontend compatible with many FPGA boards, based on the AK4619VN audio CODEC.
155 parts241
2 layers70.6 × 90.9 mm
ISO11446PWR01
mlab-modules/ISO11446PWR011Car trailer emulator for use trailer socket as a power source
- Size
- 70.6 × 90.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 45
- Pads
- 191
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Feb 2023
- Updated
- 14 Feb 2026
Overview
ISO11446PWR01 is an open-source printed circuit board by mlab-modules, from the mlab-modules/ISO11446PWR01 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 70.6 × 90.9 mm with 70 parts on 45 nets.
It is built around the LTV-357T. Its parts include 23 resistors, 20 connectors, 10 diodes, 7 ICs and 4 fuses.
Main components
1README
README.mdISO11446PWR01 - Trailer emulator
ISO 11446 specifies a 13-pole electrical connector between towing and towed vehicles with 12 volt electrical system. The module emulates connection of the trailer to get power supply and commands signals for connected devices.
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | WAGO 256-401 | Mlab_CON:WAGO256 | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J13, J19, J20, J21, J22 |
| 9 | 1k | Mlab_R:SMD-0805 | R8, R9, R12, R13, R16, R17, R18, R22, R23 |
| 9 | LED | Mlab_D:LED_1206 | D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 7 | 33R | Resistor_THT:R_Radial_Power_L13.0mm_W9.0mm_P5.00mm | R1, R2, R3, R4, R5, R6, R7 |
| 7 | 510R | Mlab_R:SMD-0805 | R10, R11, R14, R15, R19, R20, R21 |
| 7 | LTV-357T | Package_SO:SO-4_4.4x3.6mm_P2.54mm | U1, U2, U3, U4, U5, U6, U7 |
| 2 | 16A | Mlab_CON:Fuse-Keystone-3557-2 | F4, F5 |
| 2 | 2x4 | Mlab_Pin_Headers:Straight_2x04 | J16, J18 |
| 2 | HOLE | Mlab_Mechanical:MountingHole_3mm | M3, M4 |
| 2 | HOLE M3 | Mlab_Mechanical:MountingHole_3mm | M1, M2 |
| 2 | SD110-16 | Mlab_F:1812 | F1, F3 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10uF | Mlab_C:SMD-0805 | C1 |
| 1 | 3.3-5V | Mlab_Pin_Headers:Straight_2x03 | J14 |
| 1 | BZV55C-5,6V | Diode_SMD:D_SMA | D1 |
| 1 | Signals | Mlab_Pin_Headers:Straight_2x07 | J15 |
Questions
How big is the ISO11446PWR01 PCB?
It measures 70.6 × 90.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ISO11446PWR01 use?
70 parts, built around the LTV-357T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ISO11446PWR01 KiCad files?
From the mlab-modules/ISO11446PWR01 repository on GitHub, at the commit this page was made from: the board is hw/sch_pcb/ISO11446PWR01.kicad_pcb and its schematic hw/sch_pcb/ISO11446.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ISO11446PWR01 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 88 mm
- 4 layers60 × 30 mm
DALI USB
SvenHaedrich/kicad_dali_usb_lpc
KiCad Project for DALI to USB interface based on NXP LPC 1114 µController.
47 parts3MIT - 2 layers50.8 × 25.4 mm
Ckt irsense split
IowaScaledEngineering/ckt-irsense
CKT-IRSENSE Reflective Infrared Proximity Sensor
26 parts1 - 2 layers12 × 27.5 mm
- 4 layers102.2 × 83 mm
- 4 layers98.9 × 81.3 mm
- 4 layers102.2 × 83 mm
