Skip to the content

ESP8266

229 boards

KiCad boards from 145 GitHub repositories tagged “esp8266”, the most starred first; open any of them in PCBKit.

  • 2 layers45.7 × 60.3 mmMiaw wifitools, the printed circuit board in 3D

    Miaw wifitools

    DX4GREY/esp8266_wifitools

    This is a WiFi Tool which includes EvilTwin and Deauther, this tool is based on esp8266_deauther, this tool fully runs on esp8266

    25 parts19
  • 2 layers98.5 × 17.8 mmWeeSpindel, the printed circuit board in 3D

    WeeSpindel

    c-/weeSpindel

    Smaller, simpler version of the iSpindel. NOTE: Work-in-progress

    22 parts17
  • 2 layers199.4 × 50.8 mmNixie board, the printed circuit board in 3D

    Nixie board

    vascofazza/cloxie_nixie_clock

    Schematics and code for Cloxie: my Nixie Tube Clock.

    85 parts17GPL-3.0
  • 2 layersEsp dmx shield, the printed circuit board in 3D

    Esp dmx shield

    raumzeitlabor/esp-mqtt-dmx

    small ESP project which acts as a DMX controller to handle RGB LED PAR lamps via MQTT messages

    14 parts16GPL-3.0
  • 2 layers44.6 × 21.8 mmDC DC only, the printed circuit board in 3D

    DC DC only

    Chrismettal/ESP-Hiro

    ESP-8266 Smart home dev board / general purpose IO for your home!

    24 parts15GPL-3.0
  • 2 layers55.6 × 63.5 mmDMB Wemos D1 Breakout, the printed circuit board in 3D

    DMB Wemos D1 Breakout

    MKme/ESP8266

    ESP8266 projects, firmware, PCB designs, Gerbers & ref docs

    89 parts14
  • 2 layers50 × 50 mmESP12 Harness, the printed circuit board in 3D

    ESP12 Harness

    WingTangWong/ESP8266_Programming_D1_Mini_Pogo_Jig

    Programming jig for ESP-12 modules using Wemos D1 Mini ESP8266 Module and Pogo Pins

    2 parts14GPL-3.0
  • 2 layers93 × 42 mmADEM, the printed circuit board in 3D

    ADEM

    timelab/ADEM

    Mobile device for distributed measurements of particulate matter (fine dust)

    29 parts13LGPL-3.0
  • 4 layers43 × 40.1 mmStm32flight, the printed circuit board in 3D

    Stm32flight

    PinkFluffyUnic0rn/stm32flight

    Flight controller for a small quadcopter

    101 parts12GPL-3.0
  • 2 layers60 × 45 mm8BitWiFiVisualizer, the printed circuit board in 3D

    8BitWiFiVisualizer

    stasiselectronics/8BitWiFiVisualizer

    Open Source Hardware project for a minimalist WiFi enabled 8 Bit visualizer. The included firmware displays the intensity of the packet stream for a particular AP channel, but feel free to remix the hardware or write…

    29 parts12
  • 4 layers47 × 32.9 mmRaesp gateway, the printed circuit board in 3D

    Raesp gateway

    cziter15/raesp_gateway

    :satellite: A standalone device project featuring SX1278 and ESP8266 components, serving as a radio-WiFi gateway.

    17 parts11GPL-3.0
  • 4 layers25.5 × 22.4 mmWi se rewirable, the printed circuit board in 3D

    Wi se rewirable

    depau/wi-se-hw

    Cheap and tiny ESP8266 boards for Wi-Se to access your SBC or router serial port remotely

    51 parts11
  • 4 layers136.3 × 71.1 mmMSign, the printed circuit board in 3D

    MSign

    mincrmatt12/MSign

    internet-connected led sign control system

    169 parts11MIT
  • 2 layers92.5 × 29 mmRacingLapTimer, the printed circuit board in 3D

    RacingLapTimer

    BlueAndi/RacingLapTimer

    Racing lap timer, based on a laser sensor.

    6 parts10MIT
  • 2 layers35 × 99.5 mmPovslinger, the printed circuit board in 3D

    Povslinger

    Jeija/esp8266-povslinger

    Persistence of vision display using ESP8266 and APA102-2020

    49 parts10
  • 2 layers80 × 60 mmEnvMonitor, the printed circuit board in 3D

    EnvMonitor

    kennySzhucheng/EnvMonitor

    🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程

    27 parts10
  • 2 layers67 × 44 mmWifiDoorBell D1-mini, the printed circuit board in 3D

    WifiDoorBell D1-mini

    thorsten-l/ESP8266-WiFi-Doorbell-Gateway

    A gateway for your doorbell button ;-)

    15 parts10Apache-2.0
  • 2 layers74.9 × 50.2 mmD1MiniChainCounterWLAN, the printed circuit board in 3D

    D1MiniChainCounterWLAN

    AK-Homberger/ESP8266_AnchorChainControl_WLAN

    Remote control for anchor chain that shows current chain lenght via WLAN to phone/tablet (with ESP8266 D1 Mini).

    20 parts9GPL-3.0
  • 2 layers28 × 80 mmDoorman, the printed circuit board in 3D

    Doorman

    zokl/homekit-doorman

    System of a doorbell and smart lock integration into Apple HomeKit

    20 parts8MIT
  • 2 layers44.8 × 64.8 mmBD35F FridgeController, the printed circuit board in 3D

    BD35F FridgeController

    AK-Homberger/BD35F-FridgeController

    An electronic thermostat for a Danfoss/Secop BD35F Compressor with ESP8266.

    10 parts7GPL-3.0
  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers76.5 × 38.1 mmCactus, the printed circuit board in 3D

    Cactus

    hutscape/cactus

    🌵 Indoor WiFi-connected temperature and humidity sensor 🍶

    25 parts7MIT
  • 2 layers65 × 56 mmPower monitor hat, the printed circuit board in 3D

    Power monitor hat

    rafw87/hardware-modules

    Set of DIY hardware modules.

    53 parts7CC-BY-SA-4.0
  • 2 layers87 × 87 mmEsp thermostat, the printed circuit board in 3D

    Esp thermostat

    tomikaa87/esp-thermostat

    Smart WiFi thermostat based on the well-known ESP8266 SoC.

    59 parts7GPL-3.0