Skip to the content
4 layers47 × 32.9 mmRaesp gateway, the printed circuit board in 3D

:satellite: A standalone device project featuring SX1278 and ESP8266 components, serving as a radio-WiFi gateway. The primary objective is to provide support for OOK remote power outlets, with the flexibility for potential future integration of LoRa 433 and other communication protocols, thanks to its adaptable hardware.

Size
47 × 32.9 mm
Copper layers
4
Thickness
1.63 mm
Parts
17
Nets
28
Pads
77
Tracks, vias
120, 53
Pours
10
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
27 Apr 2022
Updated
22 Dec 2025

Overview

Raesp gateway is an open-source printed circuit board by cziter15, from the cziter15/raesp_gateway repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 47 × 32.9 mm with 17 parts on 28 nets, routed with 120 tracks and 53 vias.

It is built around the ESP-12S and AMS1117-3.3. Its parts include 7 capacitors, 3 resistors, 3 ICs, 2 diodes and 2 connectors. It belongs with the radio and wireless and home automation and IoT boards and the ESP8266 boards of this library.

Main components

2

README

hardware/README.md

Hardware design : raesp_gateway

Schematic

image

Renders

image

Parts

17
QtyValueFootprintReferences
20.1µfCapacitor_SMD:C_1206_3216MetricC4, C5
210µfCapacitor_SMD:C_1206_3216MetricC1, C7
2220Resistor_SMD:R_1206_3216MetricR2, R8
222µfCapacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-IC3, C6
110µfCapacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-IC2
11kResistor_SMD:R_1206_3216MetricR4
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1Ai-Thinker-Ra-02RF_Module:Ai-Thinker-Ra-01-LoRaU2
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1ESP-12SRF_Module:ESP-07U1
1RFLED_SMD:LED_1206_3216MetricD2
1USB_OTGConnector_USB:USB_Micro-B_Molex-105017-0001J1
1WIFILED_SMD:LED_1206_3216MetricD1

Similar boards

  • 2 layers56.5 × 50 mmLed40board, the printed circuit board in 3D

    Led40board

    MrJake222/leds40

    LED4.0 (finally...)

    22 parts
  • 2 layers54.9 × 33 mmBoard2, the printed circuit board in 3D

    Board2

    dgoodlad/esp8266-mitsubishi-aircon

    ESP8266 / Mitsubishi AC interface

    26 parts24MIT
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 4 layers77 × 83 mmGeoMCU, the printed circuit board in 3D

    GeoMCU

    NohPei/GeoMCU

    Integrated Geophone Boards with programmable gain and an onboard MCU. Can be used over WiFi or wired with an external ADC.

    80 parts2CERN-OHL-P-2.0
  • 2 layers118.7 × 86.4 mmWallbox, the printed circuit board in 3D

    Wallbox

    dkonigsberg/wallbox-board

    Wall-O-Matic Microcontroller Interface Board

    55 parts1CC-BY-SA-4.0
  • 2 layers120 × 100 mmEnvSensor v2, the printed circuit board in 3D

    EnvSensor v2

    jakubprzybytek/Environmental-Sensors

    162 parts1
  • 2 layers64.8 × 62.2 mmWLED V0.1, the printed circuit board in 3D

    WLED V0.1

    Krishnawa/WLED_HW

    WLED Hardware

    55 parts1
  • 2 layers35.1 × 36.3 mmESP8266-IR, the printed circuit board in 3D

    ESP8266-IR

    willbicks/ESP8266-IR

    24 parts1

Questions

How big is the Raesp gateway PCB?

It measures 47 × 32.9 mm and has 4 copper layers, 1.63 mm thick.

What parts does the Raesp gateway use?

17 parts, built around the ESP-12S and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Raesp gateway KiCad files?

From the cziter15/raesp_gateway repository on GitHub, at the commit this page was made from: the board is hardware/gw.kicad_pcb and its schematic hardware/gw.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Raesp gateway design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).