Skip to the content
12345678910111213141516P$1

ESP-12S

Ai-ThinkerExtended

-20℃~+85℃ -90dBm 16dBm 170mA 2.4GHz 3.3V 56mA 802.11b/g/n、TCP、IP ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART SMD,24x16mm WiFi Modules ROHS

Part id
ai-thinker/ESP-12S
Category
WiFi Modules
Package
SMD,24x16mm
Pins
17
In stock
3,069 at JLCPCB (C82898)
Used on
25 open-source boards

Overview

The ESP-12S is a wiFi Module made by Ai-Thinker in a SMD,24x16mm package with 17 pins. -20℃~+85℃ -90dBm 16dBm 170mA 2.4GHz 3.3V 56mA 802.11b/g/n、TCP、IP ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART SMD,24x16mm WiFi Modules ROHS.

PCBKit's library has its KiCad symbol (SparkFun-RF:ESP-12S, from Eagle libraries) and its footprint (SparkFun-RF:ESP-12S, from Eagle libraries), ready for a KiCad board. 3,069 are in stock at JLCPCB (part C82898). 25 open-source boards in 17 repositories on GitHub use it.

Symbol

1RST2ADC3EN4IO165IO146IO127IO138VCC9GNDP$1GND10IO1511IO212IO013IO414IO515RXD016TXD0
SparkFun-RF:ESP-12SFrom Eagle libraries

Footprint

12345678910111213141516P$1
SparkFun-RF:ESP-12SFrom Eagle libraries

Pinout

17
The pins of the ESP-12S
PinNameType
1RSTUnspecified
2ADCUnspecified
3ENUnspecified
4IO16Unspecified
5IO14Unspecified
6IO12Unspecified
7IO13Unspecified
8VCCUnspecified
9GNDUnspecified
10IO15Unspecified
11IO2Unspecified
12IO0Unspecified
13IO4Unspecified
14IO5Unspecified
15RXD0Unspecified
16TXD0Unspecified
P$1GNDUnspecified

Open-source boards using it

25See all 25
  • 2 layers54.9 × 33 mmBoard2, the printed circuit board in 3D

    Board2

    dgoodlad/esp8266-mitsubishi-aircon

    ESP8266 / Mitsubishi AC interface

    26 parts24MIT
  • 4 layers47 × 32.9 mmRaesp gateway, the printed circuit board in 3D

    Raesp gateway

    cziter15/raesp_gateway

    :satellite: A standalone device project featuring SX1278 and ESP8266 components, serving as a radio-WiFi gateway.

    17 parts11GPL-3.0
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 4 layers77 × 83 mmGeoMCU, the printed circuit board in 3D

    GeoMCU

    NohPei/GeoMCU

    Integrated Geophone Boards with programmable gain and an onboard MCU. Can be used over WiFi or wired with an external ADC.

    80 parts2CERN-OHL-P-2.0
  • 2 layers118.7 × 86.4 mmWallbox, the printed circuit board in 3D

    Wallbox

    dkonigsberg/wallbox-board

    Wall-O-Matic Microcontroller Interface Board

    55 parts1CC-BY-SA-4.0
  • 2 layers120 × 100 mmEnvSensor v2, the printed circuit board in 3D

    EnvSensor v2

    jakubprzybytek/Environmental-Sensors

    162 parts1
  • 2 layers64.8 × 62.2 mmWLED V0.1, the printed circuit board in 3D

    WLED V0.1

    Krishnawa/WLED_HW

    WLED Hardware

    55 parts1
  • 2 layers35.1 × 36.3 mmESP8266-IR, the printed circuit board in 3D

    ESP8266-IR

    willbicks/ESP8266-IR

    24 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ESP-12S?

Yes. The symbol is SparkFun-RF:ESP-12S and the footprint SparkFun-RF:ESP-12S, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ESP-12S?

SMD,24x16mm, with 17 pins. Its footprint is drawn on this page.

Where is the ESP-12S datasheet?

Ai-Thinker publishes it: the Datasheet link on this page opens it.

Where can I order the ESP-12S?

JLCPCB lists it as part C82898, with 3,069 in stock; the sellers' links on this page open their listings.

What can replace the ESP-12S?

Parts like it in the library: the ESP32-WROOM-32E-N4 by Espressif Systems, the ESP-12F(ESP8266MOD) by Ai-Thinker, the ESP32-WROOM-32 by Espressif Systems and the ESP32-WROOM-32E-N16 by Espressif Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ESP-12S?

25 boards in 17 repositories on GitHub; the most starred are listed on this page, with their KiCad files.