Skip to the content
4 layers43 × 40.1 mmStm32flight, the printed circuit board in 3D

Flight controller for a small quadcopter

Size
43 × 40.1 mm
Copper layers
4
Thickness
1.6 mm
Parts
101
Nets
72
Pads
333
Tracks, vias
1,785, 118
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
23 May 2024
Updated
5 Nov 2026

Overview

Stm32flight is an open-source printed circuit board by PinkFluffyUnic0rn, from the PinkFluffyUnic0rn/stm32flight repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 43 × 40.1 mm with 101 parts on 72 nets, routed with 1,785 tracks and 118 vias.

Its parts include 55 capacitors and 7 ICs. It belongs with the robots and motor control and radio and wireless boards and the ESP8266 and STM32 boards of this library.

README

README.md

STM32 Flight controller

DIY quadcopter flight controller from scratch, two boards and software.

Project structure is described on wiki page.

Software

Software part implements all basic quadcopter flight control features. Configuration commands and settings are on wiki page.

  • Rotation speed stabilization using gyroscope readings.
  • Attitude stabilization using accelerometer/gyroscope readings.
  • Yaw stabilization using gyroscope readings.
  • Yaw stabilization using magnetometer/gyroscope readings.
  • Acceleration stabilization using accelerometer readings.
  • Altitude stabilization using barometer/accelerometer readings.
  • Position stabilization using GNSS/accelerometer/magnetometer readings.
  • Configuration through Wi-Fi.
  • Dshot-300 and Dshot-600 ESC control protocols.
  • IRC Tramp VTX control.
  • OSD for digital VTX through MSP.
  • Telemetry and control through eLRS.
  • Terminal configuration tool.
  • Qt5 based GUI configuration tool for desktop and android.

STM32H723 based board

Schematic

  • MCU: STM32H723VGT6
  • Crystall oscillator: 20 Mhz
  • DC-DC converter for control board: TPS5430
  • Control board voltage regulator: LDL1117S33R
  • Accelerometer/Gyroscope: ICM-42688-P
  • Barometer: DPS368
  • Magnetometer: LIS3MDL
  • External magnetometer: MMC5983MA
  • Flight log storage: W25Q
  • GNSS module: M10
  • Remote control: ERLS CRSF receiver
  • Telemetry/debug/config: ESP8285

STM32F405 based board

  • MCU: STM32F405RGT6
  • Crystall oscillator: 20 Mhz
  • DC-DC converter for control board: TPS5430 (external)
  • Control board voltage regulator: LDL1117S33R-3.3
  • Accelerometer/Gyroscope: ICM-42688-P
  • Barometer: DPS368
  • Magnetometer: QMC5883L
  • Flight log storage: W25Q
  • GNSS module: M10
  • Remote control: ERLS CRSF receiver
  • Telemetry/debug/config: ESP8285

The quadcopter used for testing

  • Motors: 1404, 3800 kV
  • Props: 3030
  • Battery: 14.8v (4s), 1300 mAh, 120c
  • Frame: carbon fiber
  • Canopy, VTX mount: 3d printed PLA
  • Landing pads: EVA foam

Parts

101
QtyValueFootprintReferences
54CommentPcbLib1:0603c2, c10, c11, c12, c13, c14, c15, c16, c17, c18, c19, c20, c21, c22, c23, c24 +38
31, , , , , , , , , , , , , , , +15
2CommentPcbLib1:smd_crystallcr1, cr2
2CommentPcbLib1:SH1.0-6i2c, spi3
1CommentPcbLib1:PCBComponent_1c1
1CommentPcbLib1:lqfp64u2
1CommentPcbLib1:esp8285u3
1CommentPcbLib1:sh1.0-2power
1CommentPcbLib1:qmc5883lu6
1CommentPcbLib1:w25qu5
1CommentPcbLib1:DPS368u8
1CommentPcbLib1:ams1117u1
1CommentPcbLib1:sh1.0-4uart
1CommentPcbLib1:SH1.0-8esc
1CommentPcbLib1:icm42688u7
1CommentPcbLib1:rainsun antennaant

More from PinkFluffyUnic0rn/stm32flight

4
  • 4 layers43 × 40.1 mmStm32flight, the printed circuit board in 3D

    Stm32flight

    PinkFluffyUnic0rn/stm32flight

    Flight controller for a small quadcopter

    97 parts12GPL-3.0
  • 2 layers18.3 × 13.9 mmLis3mdl, the printed circuit board in 3D

    Lis3mdl

    PinkFluffyUnic0rn/stm32flight

    Flight controller for a small quadcopter

    17 parts12GPL-3.0
  • 2 layers18.3 × 13.9 mmMmc5983ma, the printed circuit board in 3D

    Mmc5983ma

    PinkFluffyUnic0rn/stm32flight

    Flight controller for a small quadcopter

    17 parts12GPL-3.0
  • 2 layers19.5 × 19 mmDcdc, the printed circuit board in 3D

    Dcdc

    PinkFluffyUnic0rn/stm32flight

    Flight controller for a small quadcopter

    15 parts12GPL-3.0

Similar boards

  • 4 layers70 × 72 mmSPINC AA Charger, the printed circuit board in 3D

    SPINC AA Charger

    CoretechR/SPINC

    DIY Automatic Battery Charger Using RP2040

    101 parts467GPL-3.0
  • 4 layers22.9 × 61 mmPico ice, the printed circuit board in 3D

    Pico ice

    tinyvision-ai-inc/pico-ice

    Raspberry Pi PICO board + Lattice iCE40 FPGA's

    101 parts203MIT
  • 4 layers100 × 100 mmEth, the printed circuit board in 3D

    Eth

    imihajlow/ccpu

    A 8-bit computer made of 74xx series logic gates and memory ICs.

    101 parts145
  • 4 layers50 × 50 mmMiniSpeedCam-1.2, the printed circuit board in 3D

    MiniSpeedCam-1.2

    Valar-Systems/MiniSpeedCam

    MiniSpeedCam

    101 parts116CERN-OHL-S-2.0
  • 4 layers60 × 95 mmSTM32H7 GuitarPedal, the printed circuit board in 3D

    STM32H7 GuitarPedal

    GuitarML/GuitarPedalSTM32

    Guitar pedal using a stm32h7 microcontroller programmed with CubeIDE (PCB and Firmware)

    101 parts100MIT
  • 4 layers58.4 × 22.9 mmQuickfeather board, the printed circuit board in 3D

    Quickfeather board

    QuickLogic-Corp/quick-feather-dev-board

    100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain

    101 parts66CC-BY-SA-4.0
  • 4 layers110.6 × 52.5 mmSineWaveGenerator, the printed circuit board in 3D

    SineWaveGenerator

    CARSSCenter/OpenNerve-Implantable-Pulse-Generator

    Source files for the OpenNerve implantable pulse generator (IPG), including firmware and hardware for Gen1 and Gen2 PCBAs as well as enclosure CAD and documentation.

    101 parts26CC-BY-4.0

Questions

How big is the Stm32flight PCB?

It measures 43 × 40.1 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Stm32flight use?

101 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stm32flight KiCad files?

From the PinkFluffyUnic0rn/stm32flight repository on GitHub, at the commit this page was made from: the board is pcb/F4/project.kicad_pcb and its schematic pcb/F4/project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stm32flight design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).