
Cell test bench
0hasant/Liion_Cell_Simulator
Single-cell characterization bench for 18650 and 21700 Li-ion cells (DMEGC INR45E, generic 3.5 Ah 18650). Part of the Solaris final-year project.

Source files for the OpenNerve implantable pulse generator (IPG), including firmware and hardware for Gen1 and Gen2 PCBAs as well as enclosure CAD and documentation.
SineWaveGenerator is an open-source printed circuit board by CARSSCenter, from the CARSSCenter/OpenNerve-Implantable-Pulse-Generator repository on GitHub, published under the CC-BY-4.0 licence. It is a 4-layer board of 110.6 × 52.5 mm with 101 parts on 62 nets, routed with 500 tracks and 53 vias.
It is built around the OPA2188AID, TLV172IDCK and TPS63002DRCT, with the BAT54 among its other parts. Its parts include 36 capacitors, 27 resistors, 11 ICs, 10 connectors and 5 diodes.
Source files for the OpenNerve implantable pulse generator (IPG), charger, and user interface software
The OpenNerve IPG is designed to enable researchers to develop novel therapies in the neuromodulation and bioelectronic medicine spaces. It is currently being used by a number of groups for acute and chronic preclinical studies, with plan to transition to clinical studies when ready.The IPG is capable of providing current-based bipolar electrical stimulation, measuring biosignals using multiple analog front ends (AFEs), and connecting with third-party sensors via an in-body I2C network. It communicates with a user controller over Bluetooth Low Energy (BLE) and can be easily configured to be rechargeable over inductive link. All source files are released under the CC-BY 4.0 open source copyright license, which requires attribution but allows their use for closed-source and commercial applications.
Two versions of the printed circuit board inside OpenNerve have been designed and manufactured. The Gen1 PCBA has eight pseudo-independent monopolar stimulation channels (configurable as four bipolar channels), two differential biosignal amplifiers for recording ECG, EMG, or eCAPS, and an I2C port for connection to an accelerometer or other in-body digital sensors. The Gen2 PCBA has two fully independent bipolar stimulation channels capable of square wave stimulation up to 1200 Hz or low frequency sine wave stimulation, four configurable analog front ends, and an I2C port. See below for electrical specifications for the Gen2 IPG (square wave stimulation and analog front-ends).
OpenNerve contains two microcontrollers: an nRF52810 which controlls BLE communication (referred to as "BLE"), and an STM32 which controls most other functions (referred to as "MCU"). BLE firmware is the same for both Gen1 and Gen2 PCBAs and can be found here. Instructions for programming a new board can be found in the BLE Flashing Guide under Docs. MCU firmware is different for Gen1 and Gen2 IPGs; the source code and hex files for each board's MCU firmware can be found in their respective folders, and instructions for compiling and flashing can be found at MCU Flashing Guide.
A Windows application has been written in VSCode to control OpenNerve's functions and download/save measurements. The source code for this app can be found in the OpenNerve Windows App repo. To communicate with OpenNerve using this app requires an encryption private key. To get the key used for the open-source builds of MCU2 firmware please reach out to carss@usc.edu. There are also instructions included here on how to create your own encryption keys and firmware build.
An Android app is also under development for communication and control with OpenNerve. Prototype code for this app can be found here.
The OpenNerve IPG can be charged inductively using the OpenNerve Charger.
The OpenNerve IPG has been designed and manufactured in partnership with a number of contributors from the academic and private sectors, all of whom are committed to open source neurotech and lowering the barrier to developing new therapies. See below for a list of contributing organizations (last updated 22/01/2026).
Funding for OpenNerve has been provided by the US National Institutes of Health's SPARC program # 1U41NS129514 as well as by the US National Science Foundation's POSE Phase 1 program # 2449357.
The contents of this repository are subject to revision. No representation or warranty, express or implied, is provided in relation to the accuracy, correctness, completeness, or reliability of the information, opinions, or conclusions expressed in this repository.
The contents of this repository (the “Materials”) are experimental in nature and should be used with prudence and appropriate caution. Any use is voluntary and at your own risk.
The Materials are made available “as is” by USC (the University of Southern California and its trustees, directors, officers, employees, faculty, students, agents, affiliated organizations and their insurance carriers, if any), its collaborators Med-Ally LLC and Medipace Inc., and any other contributors to this repository (collectively, “Providers”). Providers expressly disclaim all warranties, express or implied, arising in connection with the Materials, or arising out of a course of performance, dealing, or trade usage, including, without limitation, any warranties of title, noninfringement, merchantability, or fitness for a particular purpose.
Any user of the Materials agrees to forever indemnify, defend, and hold harmless Providers from and against, and to waive any and all claims against Providers for any and all claims, suits, demands, liability, loss or damage whatsoever, including attorneys' fees, whether direct or consequential, on account of any loss, injury, death or damage to any person or (including without limitation all agents and employees of Providers and all property owned by, leased to or used by either Providers) or on account of any loss or damages to business or reputations or privacy of any persons, arising in whole or in part in any way from use of the Materials or in any way connected therewith or in any way related thereto.
The Materials, any related materials, and all intellectual property therein, are owned by Providers.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R4, R12, R14, R18, R19, R20, R21, R26, R28 |
| 6 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21, C29, C33, C34, C35, C36 |
| 5 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C22, C26, C31, C32 |
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C13, C17, C19, C25 |
| 5 | 300pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C16, C20, C24, C27 |
| 5 | TLV172IDCK | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U4, U5, U13, U15, U16 |
| 4 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R10, R16 |
| 4 | BAT54 | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D5, D6 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C28, C30 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7 |
| 2 | 220nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C8 |
| 2 | 22nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C9 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C6 |
| 2 | 3.3nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C10 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R11 |
| 2 | 500 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R24 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 0.1uF1, 10uF1 |
| 2 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10, J12 |
| 2 | TLV9061xDBV | Package_TO_SOT_SMD:SOT-23-5 | U10, U14 |
| 1 | +5V | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J9 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 127k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23 |
| 1 | 2.2uH | Inductor_SMD:L_Coilcraft_LPS3010 | L1 |
| 1 | 243k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25 |
| 1 | 25.5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | 25k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 40k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 540k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | D_TVS | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | Fuse | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | OPA2188AID | OPA2188AID:SOIC127P599X175-8N | U6 |
| 1 | OPA310xDBV | Package_TO_SOT_SMD:SOT-23-5 | U12 |
| 1 | Out_Sin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J11 |
| 1 | Q_NJFET_DGS | JFET:TRANS_J201 | Q1 |
| 1 | R_Potentiometer | Potentiometer_THT:BOURNS_POT | RV2 |
| 1 | R_Potentiometer_Dual_Separate | Potentiometer_THT:DUALGANG_fixed | RV1 |
| 1 | SCLK | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | SDI | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | SW_Rotary_2x6 | Rotary_Encoder:SW_CK1050 | SW1 |
| 1 | SYNC | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | TPS63002DRCT | JFET:VREG_V62_16624-01YE | U2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | VOUT | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J8 |
| 1 | V_dac_ref | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | ~ | Package_SO:MSOP-10_3x3mm_P0.5mm | U7 |

0hasant/Liion_Cell_Simulator
Single-cell characterization bench for 18650 and 21700 Li-ion cells (DMEGC INR45E, generic 3.5 Ah 18650). Part of the Solaris final-year project.

Hakman482/fpga-power-quality-monitor
A complete hardware–FPGA–software prototype for real-time single-phase power-quality measurement, developed as an MSc Electronic & Electrical Engineering project.


jjradler/multi-vu-eurorack
Buffered multiple with an AVR-controlled VU meter and various available artistic panels.




Jsnchg/Heavy-Operations-UI-Industry-System-EI-SSCB
It measures 110.6 × 52.5 mm and has 4 copper layers, 1.6 mm thick.
101 parts, built around the OPA2188AID, TLV172IDCK, TPS63002DRCT and BAT54. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CARSSCenter/OpenNerve-Implantable-Pulse-Generator repository on GitHub, at the commit this page was made from: the board is Tools/SineWaveGenerator/PCB/SineWaveGenerator.kicad_pcb and its schematic Tools/SineWaveGenerator/PCB/SineWaveGenerator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).