
CLT
tomikaa87/vigilant-invention
This is just my playground repository for my various hobby projects

Smart WiFi thermostat based on the well-known ESP8266 SoC.
Esp thermostat is an open-source printed circuit board by tomikaa87, from the tomikaa87/esp-thermostat repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 87 × 87 mm with 59 parts on 44 nets, routed with 480 tracks and 77 vias.
It is built around the ESP-12F, HLK-PM03 and DS18B20+, with the DS1307Z+, SS8050-G and AO3480 among its other parts. Its parts include 15 resistors, 11 capacitors, 7 switches, 5 connectors and 3 ICs. It belongs with the home automation and IoT and radio and wireless boards and the ESP8266 boards of this library.
Smart WiFi thermostat based on the well-known ESP8266 SoC.
Documentation and detailed description will come in the near future...
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R12, R14, R15 |
| 6 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5, C6, C8, C10, C11 |
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | H1, H2, H3, H4, H5 |
| 3 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10, R11, R13 |
| 2 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R_A1_OPT1, R_A2_OPT1 |
| 2 | 1000u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2, C9 |
| 2 | SS8050-G | SamacSys_Parts:SOT95P240X115-3N | Q1, Q2 |
| 1 | 0,5A 250V Slow | SamacSys_Parts:FUSC10134X305N | F1 |
| 1 | 100n 310V | SamacSys_Parts:R46KI310040M1K | C1 |
| 1 | 10mH | SamacSys_Parts:UU9810MH | L1 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7 |
| 1 | 3V CR1632 | Battery:BatteryHolder_CR1632_SMD | BT1 |
| 1 | 47L16 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | AC IN | w_conn_mkds:mkds_1,5-2 | J1 |
| 1 | AO3480 | SamacSys_Parts:SOT95P280X125-3N | Q3 |
| 1 | BAV170HMFHT116 | SamacSys_Parts:SOT95P240X115-3N | D1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_SeikoEpson_MC306-4Pin_8.0x3.2mm | Y1 |
| 1 | DS1307Z+ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | DS18B20+ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | ESP-12F | ESP8266:ESP-12E_SMD | U1 |
| 1 | HK4100F-DC5V-SHG | SamacSys_Parts:HK4100FDC5VSHG | K1 |
| 1 | HLK-PM03 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_14.6x12mm_SilkScreen | LOGO1 |
| 1 | OLED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | PROGRAM | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | RELAY | w_conn_mkds:mkds_1,5-3 | J2 |
| 1 | SW_BOOST | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_FSM2JSMA | SW2 |
| 1 | SW_LEFT | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_FSM2JSMA | SW4 |
| 1 | SW_MENU | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_FSM2JSMA | SW5 |
| 1 | SW_MINUS | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_FSM2JSMA | SW3 |
| 1 | SW_PLUS | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_FSM2JSMA | SW1 |
| 1 | SW_RIGHT | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_FSM2JSMA | SW6 |
| 1 | VDR10D561KJ | Varistor:RV_Disc_D12mm_W6.7mm_P7.5mm | RV1 |

tomikaa87/vigilant-invention
This is just my playground repository for my various hobby projects

ArckRace/IoT_2025
Репозиторий для сохранения и публикации домашних заданий по курсу "Инженер умных систем"

mrwillson2u/propmesh
Open-source wireless control for Halloween and holiday props.



Eninspace/triac
This project is based on esp8266 and TRIAC for control power via remote control.


It measures 87 × 87 mm and has 2 copper layers, 1.6 mm thick.
59 parts, built around the ESP-12F, HLK-PM03, DS18B20+ and DS1307Z+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tomikaa87/esp-thermostat repository on GitHub, at the commit this page was made from: the board is pcb/esp-thermostat/esp-thermostat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).