

Pilot Wire v1
Fil Pilot for Home Assistant with MQTT
- Size
- 51.9 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 18
- Pads
- 71
- Tracks, vias
- 112, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Oct 2024
- Updated
- 9 Oct 2024
Overview
Pilot Wire v1 is an open-source printed circuit board by xbeaudouin, from the xbeaudouin/fil-pilot repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 51.9 × 52 mm with 20 parts on 18 nets, routed with 112 tracks and 0 vias.
It is built around the ESP-12F, HLK-PM03 and MOC3041M. Its parts include 7 resistors, 3 ICs, 2 diodes, 2 connectors and 1 capacitor. It belongs with the home automation and IoT boards and the ESP8266 boards of this library.
Main components
3ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi ModulesHLK-PM03
插件0.1W 1 100mVp-p 15mm 1A 20mm 3.3V 34mm 3W 3kV 70V~350V 72% 85VAC~265VAC AC/DC-DC Short Circuit Protection、Over Current Protection ±0.2% 插件 AC-DC Power Modules ROHSHI-LINKAC-DC Power ModulesMOC3041M
DIP-6-40℃~+85℃ 1 1.25V 2000V/us 4.17kV 400V 60mA TRIAC Yes DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output Optoisolators
README
README.mdFil Pilot for Home Assistant
This projet permit you to create and use a fil pilot interface on Home Assistant.
Several Directories :
Arduino/ : The Arduino source code
kicad/ : The kicard pcb and schematics
home_assistant/ : Some Home Assistant stuff
TODO
Finish documentation
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 12K | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R6, R7 |
| 2 | 120 | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R5 |
| 2 | 1N4007 | Diodes_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | MOC3041M | Housings_DIP:DIP-6_W7.62mm_LongPads | U2, U3 |
| 1 | Aesthetics:OSHW-LOGO-S_COPPER | ||
| 1 | Aesthetics:ROHS_LOGO_0.18_IN | ||
| 1 | 10uF | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 220V + FP | TerminalBlocks_Phoenix:TerminalBlock_Phoenix_MPT-2.54mm_3pol | J1 |
| 1 | ESP-12F | RF_Modules:ESP-12E | U1 |
| 1 | HLK-PM03 | Power_Supply:HLK-PM03 | PS1 |
| 1 | Prog | footprints:Pin_Header_Straight_1x05_Pitch2.54mm | J2 |
The 18 most common of 20 parts.
Similar boards
- 2 layers50.8 × 50.8 mm

- 2 layers50 × 40 mm

- 2 layers87 × 87 mm

Esp thermostat
tomikaa87/esp-thermostat
Smart WiFi thermostat based on the well-known ESP8266 SoC.
59 parts7GPL-3.0 - 2 layers39 × 83 mm

- 2 layers64.3 × 63 mm

Triac AC Dimmer 1P
Eninspace/triac
This project is based on esp8266 and TRIAC for control power via remote control.
28 parts5GPL-3.0 - 2 layers94 × 82 mm

- 2 layers63.5 × 48.3 mm

Mains monitor
rgronberg/mains-monitor
Energy monitor solution capable of collecting information on two current phases. Reports data to ThingSpeak.
31 parts - 2 layers121 × 68 mm

Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108
Questions
How big is the Pilot Wire v1 PCB?
It measures 51.9 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pilot Wire v1 use?
20 parts, built around the ESP-12F, HLK-PM03 and MOC3041M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pilot Wire v1 KiCad files?
From the xbeaudouin/fil-pilot repository on GitHub, at the commit this page was made from: the board is kicad/Pilot_Wire_v1/Pilot_Wire_v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pilot Wire v1 design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).