2 layers80 × 66 mm
Lightlink
spstack/lightlink-remote-outlet
Code and PCB designs for a device that can link a switched power outlet to any other outlet remotely.
59 parts
2 layers94 × 82 mm
EnergyMeter
jkordek1/EnergyMeter- Size
- 94 × 82 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 66
- Pads
- 194
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Sep 2024
- Updated
- 6 May 2026
Overview
EnergyMeter is an open-source printed circuit board by jkordek1, from the jkordek1/EnergyMeter repository on GitHub. It is a 2-layer board of 94 × 82 mm with 72 parts on 66 nets.
It is built around the ESP-12F, HLK-PM03 and AMS1117-5.0, with the HLW8032, LNK304GN and US1JHE3_A/H among its other parts. Its parts include 25 resistors, 18 capacitors, 6 ICs, 4 diodes and 3 connectors. It belongs with the ESP8266 boards of this library.
Main components
8
ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi Modules
HLK-PM03
插件0.1W 1 100mVp-p 15mm 1A 20mm 3.3V 34mm 3W 3kV 70V~350V 72% 85VAC~265VAC AC/DC-DC Short Circuit Protection、Over Current Protection ±0.2% 插件 AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
HLW8032
SOP-8-40℃~+85℃ 0.2% 1000:1 2 2.43V 25mW 25ppm/℃ 3.579MHz 4mA 5V Pulse output、Built-in reference source Single-Phase Energy Metering IC UART SOP-8 Energy Metering ROHSHiliwei TechEnergy Metering
LNK304GN
SMD-7P-40℃~+150℃ 170mA 62kHz~70kHz 69% 700V Flyback、Buck Non-Isolated Over Current Protection、Short Circuit Protection、Overtemperature protection (OTP) SMD-7P AC-DC Controllers and Regulators ROHSPOWER INTEGRATIONSPre-Ordered Products
US1JHE3_A/H
SMA(DO-214AC)-55℃~+150℃ 1.7V@1A 10uA@600V 1A 30A 600V 75ns SMA(DO-214AC) Fast Recovery / High Efficiency Diodes ROHSVishay IntertechnologyFast Recovery / High Efficiency Diodes
MB6S
MBS-55℃~+150℃ 1.1V@400mA 1A 35A 5uA@600V 600V Single-Phase Rectifier MBS Bridge Rectifiers ROHSMDDBridge Rectifiers
MOV-10D561K
插件,P=7.5mm180pF@1kHz 2.5kA 350V 460V 560V 7.5mm 70J 925V 插件,P=7.5mm Varistors ROHSBournsVaristors
README
README.mdEnergyMeter
This project is still WIP
About
Device for measuring power and energy consumption of AC load.
Project status
- Schematic
- PCB
- First prototype fabricated
- Coding
- Enclosure design
- 3D CAD assembly and renders
Main features
- Based on popular ESP-12 microcontroller
- HLW8032 energy meter IC
BOM
BOM is available for download in BOM folder, all components are from LCSC.com.
Images
Project folder structure
.
├── ...
├── Images # Images of the project
├── KiCADFiles # Main folder
│ ├── 3D models # 3d models of components
│ ├── BOM # Bill of Materials files
│ ├── production # gerber output folder
│ └── Schematic.pdf # Project schematic
└── ...Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R18, R21, R22, R24 |
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric | C5, C8, C9, C15, C16 |
| 4 | 0.004R | Library:R_2512_Shunt | R6, R7, R8, R9 |
| 4 | 470k | Resistor_SMD:R_0805_2012Metric | R13, R14, R15, R16 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_1206_3216Metric | C10, C17, C18 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R10, R11, R12 |
| 3 | 33n | Capacitor_SMD:C_0805_2012Metric | C11, C12, C13 |
| 2 | 1mH | Inductor_SMD:L_Taiyo-Yuden_NR-80xx_HandSoldering | L1, L2 |
| 2 | 470R | Resistor_SMD:R_0805_2012Metric | R17, R23 |
| 2 | 4u7 / 400V | Capacitor_SMD:CP_Elec_8x10 | C3, C4 |
| 2 | PC817 | Package_DIP:DIP-4_W7.62mm | U4, U5 |
| 2 | S8050-SOT23 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D3.0mm | TP1, TP2 |
| 2 | US1JHE3 | Diode_SMD:D_SMA | D3, D4 |
| 1 | 100nF X1 440V | Capacitor_THT:C_Rect_L18.0mm_W8.0mm_P15.00mm_FKS3_FKP3 | C1 |
| 1 | 100u | Capacitor_SMD:C_Elec_10x10.2 | C14 |
| 1 | 100u tant | Capacitor_Tantalum_SMD:CP_EIA-7343-15_Kemet-W | C7 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 13k | Resistor_SMD:R_0805_2012Metric | R20 |
| 1 | 22u / 50V | Capacitor_SMD:C_2220_5750Metric_Pad1.97x5.40mm_HandSolder | C6 |
| 1 | 2k05 | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 3k3 | Resistor_SMD:R_0805_2012Metric | R25 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | ESP-12F | RF_Module:ESP-12E | U2 |
| 1 | Fuse socket | Library:FH1-200CK-G | F1 |
| 1 | HLK-PM03 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-PMxx | PS1 |
| 1 | HLW8032 | Library:SOP-8_3.9x4.9mm_P1.27mm_custom | U3 |
| 1 | LNK304G | Package_DIP:PowerIntegrations_SMD-8B | U1 |
| 1 | MB6S | Package_TO_SOT_SMD:TO-269AA | D2 |
| 1 | MOV-10D561K | Varistor:RV_Disc_D12mm_W3.9mm_P7.5mm | RV1 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin | SW2 |
| 1 | Screw_Terminal_AC | Library:KF7.62-2P | J1 |
| 1 | Screw_Terminal_LOAD | Library:KF7.62-2P | J3 |
| 1 | UU9.8-103L0301 | Library:YDUU9.8-103L0301 | FL1 |
Similar boards
- 2 layers25.4 × 57.2 mm
HLW8032 Click
michpro/mikroBUS
Collection of add-on boards in mikroBUS™ standard
45 parts5CERN-OHL-P-2.0 - 4 layers142 × 90 mm
- 2 layers59.7 × 127.3 mm
Wasserkocher
dmatscheko/water_kettle
ESP32-S3 running ESPHome on a custom KiCad PCB for the base of a SEVERIN WK 3479 water kettle
67 parts - 2 layers44 × 71 mm
- 2 layers
- 2 layers100 × 70 mm
- 2 layers87 × 87 mm
Esp thermostat
tomikaa87/esp-thermostat
Smart WiFi thermostat based on the well-known ESP8266 SoC.
59 parts7GPL-3.0
Questions
How big is the EnergyMeter PCB?
It measures 94 × 82 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EnergyMeter use?
72 parts, built around the ESP-12F, HLK-PM03, AMS1117-5.0 and HLW8032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EnergyMeter KiCad files?
From the jkordek1/EnergyMeter repository on GitHub, at the commit this page was made from: the board is KiCAD Files/EnergyMeter.kicad_pcb and its schematic KiCAD Files/EnergyMeter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EnergyMeter design in my own project?
Its repository states no licence, so its author keeps all rights: ask jkordek1 before reusing the design.