2 layers
2 layers
Production
lod/lca20203Tutorial - Kicad for Software Engineers
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 45
- Pads
- 192
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Jan 2020
- Updated
- 15 Jan 2020
Overview
Production is an open-source printed circuit board by lod, from the lod/lca2020 repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board with 51 parts on 45 nets.
It is built around the ESP-12F, TLP291-4 and MB6S, with the TV02W360B-G, BZT52C5V6-TP and NTMD5838NLR2G-VB among its other parts. Its parts include 17 resistors, 15 diodes, 8 capacitors, 4 transistors and 3 ICs. It belongs with the ESP8266 boards of this library.
Main components
7
ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi Modules
TLP291-4
SOIC16Quad Channel Optocoupler, Phototransistor OutputToshibaUncategorised
MB6S
MBS-55℃~+150℃ 1.1V@400mA 1A 35A 5uA@600V 600V Single-Phase Rectifier MBS Bridge Rectifiers ROHSMDDBridge Rectifiers
TV02W360B-G
SOD-123-55℃~+150℃ 1uA 200W 3.1A@10/1000us 40V 49.1V 64.5V Bidirectional TVS SOD-123 ESD and Surge Protection (TVS/ESD) ROHSComchipUncategorisedBZT52C5V6-TP
SOD-123-65℃~+150℃ 1 Independent 1uA@2V 400Ω 40Ω 5.2V~6V 5.6V 500mW SOD-123 Zener Diodes ROHSMicro Commercial ComponentsZener Diodes
NTMD5838NLR2G-VB
SO-8MOSFETsVBsemi Elec
SS14FL
SMAF-55℃~+125℃ 1A 200uA@40V 40A 40V 450mV@1A Independent SMAF Schottky Diodes ROHSShikuesSchottky Diodes
README
README.mdLCA2020 Tutorial - Kicad for Software Engineers
This project contains the slides, handout and supporting files for a tutorial to be delivered at LCA202 at the Gold Coast.
https://linux.conf.au/schedule/presentation/43/
The progress checkpoint files are in the electronics directory.
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R6, R9, R10, R11, R14, R17 |
| 6 | 470uF | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C2, C3, C5, C6, C7, C8 |
| 5 | MB6S | Package_TO_SOT_SMD:TO-269AA | D1, D4, D10, D12, D14 |
| 5 | TV02W360B-G | Diode_SMD:D_SOD-123 | D3, D5, D6, D8, D9 |
| 4 | 2.4 | Resistor_SMD:R_0603_1608Metric | R4, R8, R13, R16 |
| 4 | 47 | Resistor_SMD:R_0603_1608Metric | R3, R7, R12, R15 |
| 4 | BZT52C5V6-TP | Diode_SMD:D_SOD-123 | D7, D11, D13, D15 |
| 4 | NTMD5838NLR2G | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2, Q3, Q4 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 220nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 27uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 3.32k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Conn_01x05_Male | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J2 |
| 1 | ESP-12F | RF_Module:ESP-12E | U3 |
| 1 | EVQ-Q2K03W | Button_Switch_SMD:SW_SPST_EVQQ2 | SW1 |
| 1 | LM2841Y-Q1 | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | SS14FL | Diode_SMD:D_SOD-123F | D2 |
| 1 | Screw_Terminal_01x15 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-15-5.0-H_1x15_P5.00mm_Horizontal | J1 |
| 1 | TLP291-4 | Package_SO:SOIC-16_4.55x10.3mm_P1.27mm | U2 |
More from lod/lca2020
1Similar boards
- 2 layers20.3 × 24.5 mm
Examples
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
46 parts546MIT - 2 layers65 × 30 mm
Noisesource psu
dkozel/noisesource-psu
USB powered and controlled supply for RF Noise Sources
45 parts3 - 4 layers65 × 26 mm
- 4 layers
Watch
VarunAPatil/MedSafe
The goal: a compact, wrist-worn device that simultaneously tracks heart rate & SpO₂, motion & orientation, altitude & atmospheric pressure, and GNSS location — all in one tightly integrated system.
121 parts - 2 layers90 × 85 mm
- 2 layers94 × 82 mm
- 4 layers37.1 × 37.2 mm
Doorman
AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)
44 parts252GPL-3.0 - 2 layers45 × 45 mm
Questions
What parts does the Production use?
51 parts, built around the ESP-12F, TLP291-4, MB6S and TV02W360B-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Production KiCad files?
From the lod/lca2020 repository on GitHub, at the commit this page was made from: the board is electronics/four_channel/production.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Production design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).