Skip to the content
PCBKitNew board
MOC3041M, in 3D

MOC3041M

onsemi

-40℃~+85℃ 1 1.25V 2000V/us 4.17kV 400V 60mA TRIAC Yes DIP-6 Triac, SCR Output Optoisolators ROHS

Extended
DatasheetJLCPCBLCSConsemi/MOC3041M
Category
Triac, SCR Output Optoisolators
Package
DIP-6
Pins
6

Overview

The MOC3041M is a triac, SCR Output Optoisolator made by onsemi in a DIP-6 package with 6 pins. -40℃~+85℃ 1 1.25V 2000V/us 4.17kV 400V 60mA TRIAC Yes DIP-6 Triac, SCR Output Optoisolators ROHS.

PCBKit's library has its KiCad symbol (Relay_SolidState:MOC3041M, from KiCad's library) and its footprint (Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 4,286 are in stock at JLCPCB (part C8921). 24 open-source boards in 20 repositories on GitHub use it.

Symbol

ZCD1246
Relay_SolidState:MOC3041MFrom KiCad's library

Footprint

123456
Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Parameters

15
Current - Surge(Itsm)
1A
Features
Zero-crossing trigger
Forward Current
60mA
Holding Current (Ih)
400uA
Input Type
DC
Isolation Voltage(Vrms)
4.17kV
Load Voltage
400V
Number of Channels
1
Number of terminals
6
Operating Temperature
-40℃~+85℃
Output Type
TRIAC
Power Dissipation
250mW
Static dv/dt
2000V/us
Voltage - Forward(Vf)
1.25V
Zero Crossing Circuit
Yes

Order codes

1

Pinout

6
The pins of the MOC3041M
PinNameType
1—Passive
2—Passive
3NCNot connected
4—Passive
5NCNot connected
6—Passive

Open-source boards using it

All 24
  • 2 layers121 × 68 mmFreeds sanchez, the printed circuit board in 3D

    Freeds sanchez

    pablozg/freeds

    Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora

    42 parts108
  • 2 layers50.8 × 50.8 mmEsp switch, the printed circuit board in 3D

    Esp switch

    foxel/esp-dual-rf-switch

    LightFox Dual: esp8266 WiFi+RF dual channel switch

    29 parts6
  • 2 layers90 × 100 mmOlivia control, the printed circuit board in 3D

    Olivia control

    AlterMundi-MonitoreoyControl/Proyecto-Incubadora

    Is an innovative project aimed at enhancing the efficiency and productivity of poultry incubators in family farming.

    51 parts4LGPL-2.1
  • 2 layers100 × 74 mmQym solder, the printed circuit board in 3D

    Qym solder

    basson/qym-solder

    QymSolder - Soldering station three in one - hakko t12, hot air gun, d909/898D or analog.

    135 parts4GPL-3.0
  • 2 layers68.6 × 73.7 mmLm324 soldering station, the printed circuit board in 3D

    Lm324 soldering station

    JanoVel/lm324_soldering_station

    The KiCad project of the lm324 soldering station described in this post: http://electronics.vlzqz.com/analog-closed-loop-controlled-soldering-station.html

    40 parts4MIT
  • 2 layers51.9 × 52 mmPilot Wire v1, the printed circuit board in 3D

    Pilot Wire v1

    xbeaudouin/fil-pilot

    Fil Pilot for Home Assistant with MQTT

    20 parts4AGPL-3.0
  • 2 layers148 × 61 mmIrrigation controller, the printed circuit board in 3D

    Irrigation controller

    adriencarbonaro/irrigation-controller

    Irrigation System Controller

    40 parts2
  • 2 layers100 × 100 mmSplitflap berlin, the printed circuit board in 3D

    Splitflap berlin

    julianschick/fallblatt-schematics-ep2

    Fallblattanzeige der S-Bahn Berlin (Leiterplattenlayout)

    64 parts2MIT

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/onsemi/MOC3041M" title="MOC3041M in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/onsemi/MOC3041M.jpg" alt="MOC3041M" width="1200" height="900">
A picture that opens the part, for a README
[![MOC3041M](https://pcbkit.io/embed/parts/onsemi/MOC3041M.jpg?size=s)](https://pcbkit.io/parts/onsemi/MOC3041M)

Questions

Is there a KiCad symbol and footprint for the MOC3041M?

Yes. The symbol is Relay_SolidState:MOC3041M and the footprint Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MOC3041M?

DIP-6, with 6 pins. Its footprint is drawn on this page.

Where is the MOC3041M datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the MOC3041M?

JLCPCB lists it as part C8921, with 4,286 in stock; the sellers' links on this page open their listings.

What can replace the MOC3041M?

Parts like it in the library: the EL3053 by Everlight Electronics, the MOC3052 by Lite-On, the MOC3083 by Lite-On and the MOC3053M(UMW) by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MOC3041M?

24 boards in 20 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8