2 layers35 × 47 mm
OLED
43 boardsKiCad boards from 27 GitHub repositories tagged “oled”, the most starred first; open any of them in PCBKit.
- 2 layers120 × 40 mm
Buinchiez40
ChrisChrisLoLo/bunchiez40
A pocket keyboard that makes use of mouse switches to achieve a miniscule size
90 parts56GPL-3.0 - 2 layers219.1 × 76.2 mm
- 2 layers48 × 36.5 mm
Osillyscope etchable
tvlad1234/osillyscope
Low cost, low part count CH32V003-based oscilloscope
31 parts30MIT - 2 layers60 × 40 mm
Touch n drink
zargony/touch-n-drink
Hardware and firmware for cashless payment device for cold drinks at the aeroclub at EDLH
13 parts14EUPL-1.2 - 2 layers80 × 60 mm
EnvMonitor
kennySzhucheng/EnvMonitor
🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程
27 parts10 - 2 layers35 × 50 mm
Imu rc hand unit
DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.
76 parts7MIT - 2 layers87 × 87 mm
Esp thermostat
tomikaa87/esp-thermostat
Smart WiFi thermostat based on the well-known ESP8266 SoC.
59 parts7GPL-3.0 - 2 layers65 × 100 mm
- 2 layers94 × 57.8 mm
Artsey ergo
tmshader/artsey-ergo
A 3D printable ergonomic wireless Artsey-based keyboard running ZMK.
36 parts6CERN-OHL-S-2.0 - 2 layers105.4 × 107.9 mm
Ultimate adafruit macropad baseboard
Fescron/Ultimate_Adafruit_MacroPad
An upgraded Adafruit Macropad with easier macro-layer-switching using additional NeoKey buttons (and OLED display). Also includes keyboard-layout switching and dimming as well as a lot of macro-definitions.
17 parts5MIT - 2 layers60 × 60 mm
- 2 layers46 × 75.9 mm
NRF24Radio STM32G431KB
denysderihlazov/stm32-nrf24-wireless-node
Custom STM32G431KBT6 + nRF24L01 wireless communication module with SSD1306 OLED interface, 2-layer PCB and STM32 HAL firmware. Hardware (KiCad), Gerbers, BOM and documentation included.
56 parts3MIT - 2 layers68.9 × 23 mm
- 2 layers42 × 58 mm
NF01
feboyfierlyan/nodi
Nodi — a custom PCB digital companion charm. KiCad hardware, RISC-V firmware, a shared C/WASM core, and an interactive 3D simulator.
44 parts1 - 2 layers89.9 × 70.4 mm
IRadio
JakobThiessen/iRadio
ESP32-S3 Internetradio mit I²S-Verstärker, RGB-OLED-Display, WS2812-LED und modernem Web-Interface. Konfiguration per AccessPoint, Senderverwaltung via LittleFS, OTA-Updates und WebSocket-Echtzeit-UI.
69 parts1MIT - 2 layers65.5 × 60.8 mm
Raspi pico christmas tree
jcksnvllxr80/raspi_pico_christmas_tree
This project was designed for a decorative Christmas tree made out of cedar which stands about two feet in height.
19 parts1 - 2 layers55 × 28 mm
Pihole display cape
Ajimaru/pihole-display
OLED status display for Pi-hole and Unbound on a BeagleBone Black, with hardware buttons and a web UI.
3 partsMIT - 2 layers120 × 52 mm
PlancH
caccia78/PlancH
Open source desk button panel for Home Assistant: ESP32-S3, ESPHome, OLED display, 10 buttons and RGB backlight. KiCad sources, Gerbers and a 3D-printable stand.
45 parts - 2 layers96.4 × 90.9 mm
MiniPad
DagaVedant/MiniPad
a 3x3 qmk macropad with a rotary encoder, rgb keys, and an oled with a clock and a spinning globe
34 partsMIT - 2 layers50.8 × 24.4 mm
PWMtoPWM
DaveCalaway/PWMtoPWM
That board change the a pwm_in pulse in to other pwm_out pulse. Oled display integration.
9 partsMIT - 2 layers306.4 × 122.2 mm
Bhoo 75
dhillon-m/custom-keyboard
ZMK firmware for the BHOO-75 wireless keyboard and BHOO-20 numpad with OLED (nice!nano v2, split)
169 partsMIT - 2 layers79 × 117.5 mm
- 2 layers100 × 60 mm
Daisy V2 - STM32
ghostseven/Draytronics-Daisy-PCB-V2
An open source macro pad with a rotary encoder and OLED panel, this is an alternative version to the original through hole Daisy kit.
57 parts