

Touch n drink
Hardware and firmware for cashless payment device for cold drinks at the aeroclub at EDLH
- Size
- 60 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 18
- Pads
- 53
- Tracks, vias
- 118, 18
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Jul 2024
- Updated
- 22 Jul 2026
Overview
Touch n drink is an open-source printed circuit board by zargony, from the zargony/touch-n-drink repository on GitHub, published under the EUPL-1.2 licence. It is a 2-layer board of 60 × 40 mm with 13 parts on 18 nets, routed with 118 tracks and 18 vias.
It is built around the S8550. Its parts include 3 resistors, 3 connectors, 1 IC and 1 transistor. It belongs with the radio and wireless and lEDs and displays boards and the ESP32 and RISC-V boards of this library.
Main components
1README
pcb/README.mdTouch 'n Drink PCB
Custom PCB
A custom PCB holds the ESP32-C3 Module, a buzzer and connectors to wire up display, keypad and NFC reader. The PCB is quite simple and easy to manufacture. Choose any manufacturer you like.
If you don't want to manufacture a PCB, it's also easily possible to wire up components on a perfboard (see below).
Soldered PCB:
Empty PCB:
Rendered PCB model:
PCB Layout:
Components
- 60x40 mm custom 2-layer PCB
- 1x ESP32-C3 SuperMini (AliExpress) (Amazon) (Model)
- 1x Passive buzzer, THT, 12085
- 1x S8550, SMT, TSOT-23 (or other generic NPN transistor, BEC pin ordering)
- 1x 1k resistor, SMT, 0805
- 2x 5k resistor, SMT, 0805
- 1x 4-pin JST PH header, SMT, horizontal, S4B-PH-SM4-TB
- 1x 5-pin JST PH header, SMT, horizontal, S5B-PH-SM4-TB
- 1x 7-pin JST PH header, SMT, horizontal, S7B-PH-SM4-TB
Perfboard (optional, instead of PCB)
Instead of manufacturing a custom PCB, you can wire up components on a 60x40 mm perfboard.
Components
- Prototype PCB 60x40 (AliExpress) (Amazon) (Model)
- ESP32-C3 SuperMini (AliExpress) (Amazon) (Model)
- Passive buzzer module, 3.3V, active low (AliExpress) (Amazon) (Model)
- Connectors for wiring to front panel (optional)
- Wires for soldering
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 5K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | Display | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J1 |
| 1 | ESP32-C3 SuperMini | ESP32-C3_SuperMini:ESP32-C3_SuperMini | U1 |
| 1 | Keypad | Connector_JST:JST_PH_S7B-PH-SM4-TB_1x07-1MP_P2.00mm_Horizontal | J3 |
| 1 | NFC | Connector_JST:JST_PH_S5B-PH-SM4-TB_1x05-1MP_P2.00mm_Horizontal | J2 |
| 1 | S8550 | Package_TO_SOT_SMD:TSOT-23 | Q1 |
Similar boards
- 2 layers128 × 77 mm

- 2 layers

IEC-62056-21-Optical Probe
twam/IEC-62056-21-Optical-Probe
Optical-Probe for reading out power meters supporting IEC 62056-21 via USB
38 parts33 - 2 layers60 × 40 mm

Forcegauge
szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,
77 parts18GPL-3.0 - 2 layers71.1 × 50.8 mm

Power supply and amplifier
roybaer/sound_source
Design documents for Disney Sound Source (DSS) compatible hardware
34 parts9 - 2 layers121 × 75.5 mm

Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5 - 2 layers81.2 × 40 mm

Single scale v3 kicad
IoTReady/esp32-wifi-ble-weighing-scale
This is a weighing scale designed to share data over Wi-Fi using esp32 WROOM32 module. For the weighing scale we are using a load cell and measuring the output using a HX711 24-bit ADC designed for weigh scales and…
59 parts5 - 2 layers54.6 × 34.9 mm

Doc
potato1992/PCSwitchPi
Control PC power buttons (power/reset/force power down) using a raspberry pi through Web interface
15 parts5Apache-2.0 - 4 layers39.6 × 19.6 mm

Questions
How big is the Touch n drink PCB?
It measures 60 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Touch n drink use?
13 parts, built around the S8550. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Touch n drink KiCad files?
From the zargony/touch-n-drink repository on GitHub, at the commit this page was made from: the board is pcb/touch-n-drink.kicad_pcb and its schematic pcb/touch-n-drink.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Touch n drink design in my own project?
Its repository publishes it under the EUPL-1.2 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).