4 layers30 × 45 mm
4 layers39.6 × 19.6 mm
0102-TILEDAP
TileParts/0102-TILEDAP5一个 DAPLink 调试器，附带 USB-UART 桥接功能
- Size
- 39.6 × 19.6 mm
- Copper layers
- 4
- Thickness
- 1.2 mm
- Parts
- 57
- Nets
- 42
- Pads
- 166
- Tracks, vias
- 232, 112
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 7 Sep 2022
- Updated
- 29 Sep 2022
Overview
0102-TILEDAP is an open-source printed circuit board by TileParts, from the TileParts/0102-TILEDAP repository on GitHub. It is a 4-layer board of 39.6 × 19.6 mm with 57 parts on 42 nets, routed with 232 tracks and 112 vias.
It is built around the STM32F103TBU6, SPX3819M5-L-3-3 and LESD5Z5.0CT1G, with the S8550 among its other parts. Its parts include 15 resistors, 11 capacitors, 3 connectors, 2 ICs and 2 diodes. It belongs with the STM32 boards of this library.
Main components
4
STM32F103TBU6
VFQFPN36(6x6)-40℃~+85℃ 128KB 12bit 20KB 26 2V~3.6V 32 Bit 72MHz ARM Cortex-M3 Built-in FLASH VFQFPN36(6x6) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
SPX3819M5-L-3-3
SOT-23-5-40℃~+85℃@(Ta) 1 20V 3.3V 420mV@(100mA) 500mA 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LESD5Z5.0CT1G
SOD-523-40℃~+125℃ 18.6V 1uA 200W@8/20us 25pF 5V 7.8V 9.4A@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-4 TVS SOD-523 ESD and Surge Protection (TVS/ESD) ROHSLeshan Radio (LRC)ESD And Surge Protection (TVS/ESD)
S8550
SOT-23-55℃~+150℃ 1 PNP 100nA 120 150MHz 25V 300mW 500mA 5V 600mV PNP SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.md0102-TILEDAP
一个 DAPLink 调试器，附带 USB-UART 桥接功能。
特性
- 使用 STM32F103TBU6 小封装
- 实体 nRESET 键，用于复位目标 MCU，或长按进入 TILEDAP 自身的拖拽更新模式
- 引出了一对 UART TX/RX，可通过免驱的 USB CDC-ACM 读取目标 MCU 串口日志
协议
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | LESD5Z5.0CT1G | Diode_SMD:D_SOD-523 | D?, D?, D?, D?, D?, D?, D7 |
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7, C12, C13 |
| 2 | 0R | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 1.5K | Resistor_SMD:R_0402_1005Metric | R10, R14 |
| 2 | 100K | Resistor_SMD:R_0402_1005Metric | R8, R13 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R2, R12 |
| 2 | 10uF/25V | Capacitor_SMD:C_0805_2012Metric | C1, C3 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C8, C11 |
| 2 | 4.7K | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R3 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 220R | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 470R | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 8MHz | JLC-SMT:Oscillator_SMD_3.2x2.5mm | Y1 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | G*** | kibuzzard-632952DE | kibuzzard-632952DE |
| 1 | G*** | kibuzzard-631DD70B | kibuzzard-631DD70B |
| 1 | G*** | kibuzzard-632952EA | kibuzzard-632952EA |
| 1 | G*** | kibuzzard-63295177 | kibuzzard-63295177 |
| 1 | G*** | kibuzzard-632A8CA6 | kibuzzard-632A8CA6 |
| 1 | G*** | kibuzzard-6329514A | kibuzzard-6329514A |
| 1 | G*** | kibuzzard-63295187 | kibuzzard-63295187 |
| 1 | G*** | kibuzzard-63295172 | kibuzzard-63295172 |
| 1 | G*** | kibuzzard-631DD707 | kibuzzard-631DD707 |
| 1 | G*** | kibuzzard-632952E3 | kibuzzard-632952E3 |
| 1 | G*** | kibuzzard-632952D9 | kibuzzard-632952D9 |
| 1 | G*** | kibuzzard-631DD701 | kibuzzard-631DD701 |
| 1 | G*** | kibuzzard-632952D1 | kibuzzard-632952D1 |
| 1 | G*** | kibuzzard-631DDA4D | kibuzzard-631DDA4D |
| 1 | IF | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J2 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | S8550 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | STM32F103TBU6 | Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP4.1x4.1mm | U2 |
| 1 | SW_Push | JLC-SMT:HCTL_TC-3601L-2.5 | SW1 |
| 1 | TGT | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | USB-C | JLC-SMT:HRO_TYPE-C-31-M-12 | J1 |
Similar boards
- 2 layers21.8 × 16.3 mm
- 2 layers21.8 × 16.3 mm
Nk start
Nitrokey/nitrokey-start-hardware
Crypto Stick is a USB 32-bit computer with STM32F103 processor and an OpenPGP smart card. It has a minimalistic design, the MCU is running at 72MHz, and it has a SWD port for main flash ROM update.
39 parts5 - 2 layers79.6 × 35 mm
- 4 layers46 × 46 mm
Placement
anil08607/stm32-smartwatch
A 46 × 46 mm, four-layer Bluetooth smartwatch PCB with a Nordic nRF52810-QFAA, 240 × 240 SPI LCD interface, BMA456 accelerometer, battery-backed PCF8563 RTC, USB-C 5 V charging, protected single-cell battery interface…
71 parts - 2 layers19.6 × 19.6 mm
- 4 layers19.6 × 35 mm
0101-SERIAL CP2102N
TileParts/0101-SERIAL-CP2102N
基于 CP2102N 的 USB-UART 转接器，并且附带 ESP32 兼容的自动烧录电路
46 parts - 2 layers100 × 80 mm
Questions
How big is the 0102-TILEDAP PCB?
It measures 39.6 × 19.6 mm and has 4 copper layers, 1.2 mm thick.
What parts does the 0102-TILEDAP use?
57 parts, built around the STM32F103TBU6, SPX3819M5-L-3-3, LESD5Z5.0CT1G and S8550. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 0102-TILEDAP KiCad files?
From the TileParts/0102-TILEDAP repository on GitHub, at the commit this page was made from: the board is 0102-TILEDAP.kicad_pcb and its schematic 0102-TILEDAP.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 0102-TILEDAP design in my own project?
Its repository states no licence, so its author keeps all rights: ask TileParts before reusing the design.