

DeerMon
- Size
- 30 × 45 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 38
- Pads
- 287
- Tracks, vias
- 425, 146
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Feb 2022
- Updated
- 3 May 2022
Overview
DeerMon is an open-source printed circuit board by xingrz, from the xingrz/DeerMon-PCB repository on GitHub. It is a 4-layer board of 30 × 45 mm with 51 parts on 38 nets, routed with 425 tracks and 146 vias.
It is built around the ESP32-PICO-V3-02, BCT3220ELA-TR and CH343P, with the SPX3819M5-L-3-3, LESD5Z5.0CT1G and CA-C03 among its other parts. Its parts include 17 capacitors, 9 resistors, 4 ICs, 4 diodes and 3 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
10ESP32-PICO-V3-02
QFN-48-EP(7x7)-40℃~+85℃ -97dBm 150Mbps 19.5dBm 2.412GHz~2.484GHz 2.4GHz 3V~3.6V Bluetooth、WiFi SPI、UART、I2C、I2S、SDIO transceiver QFN-48-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsWiFi ModulesBCT3220ELA-TR
TDFN-8L-EP(2x2)-40℃~+85℃ 1.5% 2.7V~5.5V 20mA 4 Over-Temperature Protection (OTP) PWM TDFN-8L-EP(2x2) LED Drivers ROHSBROADCHIPLED DriversCH343P
TQFN-16-EP(3x3)-40℃~+85℃ 3.3V、5V 3mA 6Mbps 90uA USB 2.0 USB to UART TQFN-16-EP(3x3) USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersSPX3819M5-L-3-3
SOT-23-5-40℃~+85℃@(Ta) 1 20V 3.3V 420mV@(100mA) 500mA 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLESD5Z5.0CT1G
SOD-523-40℃~+125℃ 18.6V 1uA 200W@8/20us 25pF 5V 7.8V 9.4A@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-4 TVS SOD-523 ESD and Surge Protection (TVS/ESD) ROHSLeshan Radio (LRC)ESD And Surge Protection (TVS/ESD)CA-C03
55205520 SMT ROHSJLCPCB AssemblyUncategorisedHMB1206-05
插件,D=12mm-40℃~+85℃ 12mm 2.6kHz 30mA 4V~8V 5V 6.7mm 85dB Active Buzzer (Built-in Driving Circuit) Electromagnetic 插件,D=12mm Buzzers ROHSJiangsu Huaneng ElecBuzzersPUMH4
TSSOP-6(SOT-363)-65℃~+150℃ 100mA 100nA 13kΩ 150mV 2 NPN (Pre-Biased) 200 300mW 50V 5V NPN TSSOP-6(SOT-363) Digital Transistors ROHSNexperiaDigital TransistorsSK6805-EC15
SMD-4P,1.5x1.5mm-40℃~+80℃ 0.5mA 0.65mm 1.5mm 1.5mm 120mcd~240mcd 160° 1kHz 2000V 20mcd~40mcd 3.5V~5.5V 460nm~470nm 50mcd~100mcd 520nm~530nm 620nm~625nm 800Kbit/s Built-in power-on reset circuit、Built-in one-way transmission function Semi-transparent lens SMD-4P,1.5x1.5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)TYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB Connectors
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C5, C12, C13, C16, C17 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3, C8, C11, C14, C15 |
| 4 | CraftEdge | JLC-SMT:JLC_CRAFT_EDGE_3P | CE1, CE2, CE3, CE4 |
| 4 | Mount | JLC-SMT:MountingHole_1.2mm_M1 | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0402_1005Metric | R11, R12, R13 |
| 3 | LESD5Z5.0CT1G | Diode_SMD:D_SOD-523 | D1, D2, D3 |
| 2 | 10uF/25V | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BCT3220ELA-TR | Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.7x1.3mm | U2 |
| 1 | BOOT | JLC-SMT:SHOUHAN_TS24ZJ | SW1 |
| 1 | CA-C03 | JLC-SMT:CrossAir_CA-C03 | AE1 |
| 1 | CH343P | Package_DFN_QFN:WQFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm | U1 |
| 1 | EN | JLC-SMT:SHOUHAN_TS24ZJ | SW2 |
| 1 | ESP32-PICO-V3-02 | JLC-SMT:ESP32-PICO_QFN-48_7x7mm_P0.5mm_EP4.5x4.5mm_ThermalVias | U4 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x09_P2.54mm_Vertical | J3 |
| 1 | HMB1206-05 | JLC-SMT:HNDZ_TMB1206-05 | BZ1 |
| 1 | PUMH4 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | SK6805-EC15 | JLC-SMT:OPSCO_SK68XX-EC15 | D4 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | TYPE-C-31-M-12 | JLC-SMT:HRO_TYPE-C-31-M-12 | J1 |
| 1 | ZJY144S025 | JLC-SMT:JS_AFC11-S14ICC-00 | J2 |
Similar boards
- 4 layers68.6 × 53.3 mm

- 4 layers39.6 × 19.6 mm

- 4 layers82.8 × 47.3 mm

- 4 layers46 × 46 mm

Placement
anil08607/stm32-smartwatch
A 46 × 46 mm, four-layer Bluetooth smartwatch PCB with a Nordic nRF52810-QFAA, 240 × 240 SPI LCD interface, BMA456 accelerometer, battery-backed PCF8563 RTC, USB-C 5 V charging, protected single-cell battery interface…
71 parts - 4 layers299 × 99 mm

- 2 layers70 × 100 mm

Lower
sbarisic/MagMouse
Open source hall-effect based mouse - no mechanical contacts - no failure points
128 parts2 - 4 layers149.6 × 98 mm

- 4 layers37.1 × 41 mm

Questions
How big is the DeerMon PCB?
It measures 30 × 45 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DeerMon use?
51 parts, built around the ESP32-PICO-V3-02, BCT3220ELA-TR, CH343P and SPX3819M5-L-3-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DeerMon KiCad files?
From the xingrz/DeerMon-PCB repository on GitHub, at the commit this page was made from: the board is DeerMon.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DeerMon design in my own project?
Its repository states no licence, so its author keeps all rights: ask xingrz before reusing the design.