4 layers39.6 × 19.6 mm
2 layers19.6 × 19.6 mm
0101-INDICATORS
TileParts/0101-INDICATORS一块 LED 灯板
- Size
- 19.6 × 19.6 mm
- Copper layers
- 2
- Thickness
- 1.2 mm
- Parts
- 30
- Nets
- 14
- Pads
- 52
- Tracks, vias
- 42, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 7 Oct 2022
- Updated
- 7 Oct 2022
Overview
0101-INDICATORS is an open-source printed circuit board by TileParts, from the TileParts/0101-INDICATORS repository on GitHub. It is a 2-layer board of 19.6 × 19.6 mm with 30 parts on 14 nets, routed with 42 tracks and 14 vias.
It is built around the LESD5Z5.0CT1G. Its parts include 13 diodes, 6 resistors and 1 connector.
Main components
1README
README.md0101-INDICATORS
一块 LED 灯板。
特性
- 低电平有效，需要连接 3.3V 为 LED 供电
- 双排针并联，方便将信号继续转接到别的地方，如逻辑分析仪
- 排针与 LED 之间可覆盖美纹纸自行标记
- 背面预留 ESD 器件的焊盘（需要连接 GND）
协议
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | LESD5Z5.0CT1G | Diode_SMD:D_SOD-523 | D7, D8, D9, D10, D11, D12, D13 |
| 6 | 1.5K | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6 |
| 6 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J1 |
| 1 | G*** | kibuzzard-633FDFA7 | kibuzzard-633FDFA7 |
| 1 | G*** | kibuzzard-63351A8A | kibuzzard-63351A8A |
| 1 | G*** | kibuzzard-633FDF9B | kibuzzard-633FDF9B |
| 1 | G*** | kibuzzard-633FDF52 | kibuzzard-633FDF52 |
| 1 | G*** | kibuzzard-633FE25F | kibuzzard-633FE25F |
| 1 | G*** | kibuzzard-633FDF9F | kibuzzard-633FDF9F |
| 1 | G*** | kibuzzard-63351A9D | kibuzzard-63351A9D |
| 1 | G*** | kibuzzard-633FDFA3 | kibuzzard-633FDFA3 |
| 1 | G*** | kibuzzard-633FE26A | kibuzzard-633FE26A |
| 1 | G*** | kibuzzard-633FDFAC | kibuzzard-633FDFAC |
Similar boards
- 4 layers30 × 45 mm
- 2 layers79.6 × 35 mm
- 4 layers46 × 46 mm
Placement
anil08607/stm32-smartwatch
A 46 × 46 mm, four-layer Bluetooth smartwatch PCB with a Nordic nRF52810-QFAA, 240 × 240 SPI LCD interface, BMA456 accelerometer, battery-backed PCF8563 RTC, USB-C 5 V charging, protected single-cell battery interface…
71 parts - 4 layers19.6 × 35 mm
0101-SERIAL CP2102N
TileParts/0101-SERIAL-CP2102N
基于 CP2102N 的 USB-UART 转接器，并且附带 ESP32 兼容的自动烧录电路
46 parts - 2 layers100 × 80 mm
- 2 layers50.8 × 69.2 mm
Uikit
vsfteam/vsf
Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems
51 parts341Apache-2.0 - 2 layers52.2 × 52.2 mm
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
30 parts3kApache-2.0
Questions
How big is the 0101-INDICATORS PCB?
It measures 19.6 × 19.6 mm and has 2 copper layers, 1.2 mm thick.
What parts does the 0101-INDICATORS use?
30 parts, built around the LESD5Z5.0CT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 0101-INDICATORS KiCad files?
From the TileParts/0101-INDICATORS repository on GitHub, at the commit this page was made from: the board is 0101-INDICATORS.kicad_pcb and its schematic 0101-INDICATORS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 0101-INDICATORS design in my own project?
Its repository states no licence, so its author keeps all rights: ask TileParts before reusing the design.