Embedded systems

311 boards

KiCad boards from 191 GitHub repositories tagged “embedded-systems”, the most starred first; open any of them in PCBKit.

4 layers
StealTheMoon
choicebuilds/automatic-storage-unit
A 1 layer PCB built from scratch within 36 hours in the RoboTechs hackathon using an ESP32, fabricated using the LPKF Protomat and Protolaser.
22 parts
4 layers75 × 49 mm
Kamikazii
choicebuilds/SumoBot-v2
A Robojackets robot (v2) built from scratch, featuring a custom 4-layer PCB, STM32-based (ARM Cortex-M3) firmware written in C (STM32CubeMX + CMake), and a 3D-printed chassis.
59 parts
2 layers196.8 × 171.5 mm
Smarthomepcb2logic
chromyx/Analog-Home-Design
The Analog Smart Environment Monitor is a multi-sensor safety and automation system designed to continuously monitor environmental conditions and respond automatically to critical events.
69 parts
2 layers38.5 × 31 mm
TOF SCANNER
Circuit-Digest/EdgeSense
Real-time Edge AI firmware & desktop studio for STM32H533 and VL53L8CH 8x8 multi-zone dToF sensor. On-device 3D gesture recognition, surface texture classification, hand posture detection, and raw CNH optical histogram…
58 parts
2 layers53 × 56 mm
7-segment display
contispaulcristian/7-segment-display
This project features a custom ATmega328P microcontroller board programmed in C. It drives a 4-digit 7-segment display to implement a simple counter application.
18 parts
2 layers67 × 122 mm
Gasmeter handheld device
cs99x/GasMonitorLoRaCloud
This project is a mobile and embedded application for a university course called "Mobile and Embedded Development".
76 parts
4 layers156.6 × 143.1 mm
STM32F4 Breakout
DallasFormulaRacing/PneumaticPaddleShifting
An embedded system for the driver to perform up and down shifts with pneumatic paddle shifters.
56 parts
2 layers127 × 110 mm
UNICON board
dodotronix/RobotClaire
This project is focused on a design of an autonomous robot including its electronics and basic software to present robot's features
132 parts
2 layers45.5 × 19 mm
Board vl6180x
dodotronix/Sensors
Sensors which i used and created codes (and evetualy made a board layouts) for fast implementation and tests
19 parts
2 layers73.5 × 65.5 mm
ESP32 Sensor Data Acquisition Board
EldinLz/esp32-sensor-daq
Custom ESP32-C3 sensor data acquisition PCB, firmware, fabrication files, and validation plan.
16 parts
2 layers141 × 68.6 mm
EntangledHearts
felix-scheib/Rapid-Prototyping
Rapid Prototyping
77 parts
6 layers106.5 × 103 mm
TURBINADA
GoncaloMark/Turbina
Componente Hardware e Software para Turbinas Tesup carregarem baterias de 12V.
49 parts
40 × 85 mm
SolarPoints
Grolla05/Project_SolarPoints
An autonomous IoT solar-powered smart lighting system for low-infrastructure areas, featuring KiCad PCB design, ESP32 firmware, and Google Maps telemetry dashboard. 🌐⚡🏮
102 parts
2 layers26.3 × 18 mm
Max30102 pcb
Habib-creater/MAX30102_Optical_Sensor_Board
MAX30102-based optical sensor board designed for embedded hardware development.
18 parts
2 layers97.9 × 113.9 mm
555 demo
harrisoncbrammell/555friend
A PCB designed to introduce 555 timers and their three operating states.
44 parts
2 layers72 × 53 mm
VoltWatch
hridhayesh09/VoltWatch
Custom PCB power surge detection system using ESP32 and ZMPT101B
11 parts
2 layers103.5 × 87 mm
Arduino music box
hschwar2/arduino-music-box
Arduino interactive music box featuring a 4-button diode-OR hardware interrupt circuit, tone-to-color PWM mapping, and real-time analog volume/brightness control.
24 parts
2 layers81.6 × 144.1 mm
Autonomous seed planting robot
HusseinAlwali/autonomous-seed-planting-robot
Solar-powered autonomous seed-planting rover - ESP32 firmware, Android planner app, custom KiCad PCB, and 3D-printed mechanics. My graduation project.
26 parts
2 layers108.5 × 34.5 mm
PCB board and schematic
iceyaseen/fpga-bus-identifier
An I2C, UART, and 1-Wire identifier for unknown 3-4 pin components, built on a Tang Nano 9K FPGA and a Python host app. PCB design included.
19 partsMIT
2 layers35.4 × 27.5 mm
MotionSense IMU
igilarranz/MotionSense-IMU
2-layer USB-C powered LSM6DSM IMU breakout board designed in KiCad
12 parts
2 layers130 × 90 mm
ROV
IslamHUFE/ROV-1-PCB

32 parts
2 layers63.5 × 52 mm
Esp32-laser security
JaswantBhartiya/esp32-laser-security
A wire-free laser security tripwire system powered by an ESP32-S3. Features independent transmitter nodes, multi-bounce mirror pathing, dynamic auto-ambient light calibration, custom KiCad PCB files, and 3D mechanical…
17 partsMIT
4 layers88.2 × 70.3 mm
Bittheater
kyriosaa/bittheater
A compact device that displays up to 4 custom animations on a 16x2 LCD screen
7 parts
2 layers113.4 × 110.6 mm
Controller group52
linjunway/Embedded-Systems-Sorting-Machine
Designed and built a fully automated table-tennis ball sorting machine. This project highlights the use of custom mechanical and 3D-printed parts as well as a custom controller circuit board powered by an Atmega328-PU…
57 parts