
MEOW System Integration
andrewgond/M.E.O.W-Mealtime-Electronic-Observation-and-Weighing
M.E.O.W. automated pet feeder, a system that dispenses food and logs pet weight using load cells and RFID identification.

ROV is an open-source printed circuit board by IslamHUFE, from the IslamHUFE/ROV-1-PCB repository on GitHub. It is a 2-layer board of 130 × 90 mm with 32 parts on 59 nets, routed with 302 tracks and 0 vias.
It is built around the ESP32-S3-DEVKITC-1-N8R2, LM2596S-5.0 and A4988. Its parts include 9 ICs, 6 connectors, 5 fuses, 3 diodes and 2 capacitors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | T-block | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2, J4, J5, J6 |
| 4 | fuse | Fuse:Fuse_Blade_ATO_directSolder | F1, F3, F4, F5 |
| 3 | ZK-BM1 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | U5, U6, U7 |
| 2 | LED | LED_THT:LED_D3.0mm | D2, D3 |
| 2 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 2 | capacitor | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | U8 |
| 1 | ESP32-S3-DEVKITC-1-N8R2 | esp32-s3:XCVR_ESP32-S3-DEVKITC-1-N8R2 | U3 |
| 1 | GY-MS5837 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U9 |
| 1 | LM2596 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U1 |
| 1 | LOGO | logo:logo5 | G*** |
| 1 | MPU6050 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | U4 |
| 1 | Screw_Terminal_01x04 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm | J3 |
| 1 | T-block | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J1 |
| 1 | fuse | Fuse:Fuseholder_Clip-5x20mm_Schurter_CQM_Inline_P20.60x5.00mm_D1.00mm_Horizontal | F2 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | U10 |
The 28 most common of 32 parts.

andrewgond/M.E.O.W-Mealtime-Electronic-Observation-and-Weighing
M.E.O.W. automated pet feeder, a system that dispenses food and logs pet weight using load cells and RFID identification.

tadzio8425/Chocolala
IOT Chocolate Pot. Includes an app developed in React-Native that connects locally to an ESP32 in STA or AP Mode.

JasonHEngineering/DIY-Robot-Arm-V3
1) Along with using with TMC2209 motor drivers, I have removed R8, R15, R16, R17, R18, R19 because the R value was accidentally too high. I have shorted R8, R16, R17, and left open R15, R18, R19.

riezky-gitH/SIMPAS-BOILER
> 📖 Guidebook proyek — tautan guidebook baru akan ditambahkan di sini.

arkadasgupta07/ProjectKratos
Arka Dasgupta BITS Pilani, K. K. Birla Goa Campus Aspiring to develop rovers by engineering their electronics, controls and automation subsystems.


dennowiggle/ESP32_Interface
Facilitate learning the Z80 Retro! hardware and software.

It measures 130 × 90 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the ESP32-S3-DEVKITC-1-N8R2, LM2596S-5.0 and A4988. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the IslamHUFE/ROV-1-PCB repository on GitHub, at the commit this page was made from: the board is ROV.kicad_pcb and its schematic ROV.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask IslamHUFE before reusing the design.