Skip to the content
2 layersChocolala, the printed circuit board in 3D

IOT Chocolate Pot. Includes an app developed in React-Native that connects locally to an ESP32 in STA or AP Mode.

Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
71
Pads
131
Tracks, vias
177, 0
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
15 Feb 2023
Updated
29 Jul 2023

Overview

Chocolala is an open-source printed circuit board by tadzio8425, from the tadzio8425/Chocolala repository on GitHub, published under the MIT licence. It is a 2-layer board with 20 parts on 71 nets, routed with 177 tracks and 0 vias.

It is built around the L293D, LM2596S-5.0 and A4988. It belongs with the ESP32 boards of this library.

Main components

3

README

README.md

Chocolala

The IOT Chocolate Pot:

  • Electronic instrumentation system for a reactor that prepares "hot" chocolate. Includes:

    • Continous weight and temperature measurement
    • Automatic liquid pouring
    • Controlled mixing speed
  • Backend developed using the Arduino Framework and an ESP32 development board.

  • Frontend mobile app developed using the Expo Framework and React-Native.

  • Further documentation (in Spanish): Documentación Chocolala

  • Developed in the Universidad de Los Andes for the class of Instrumentación Electrónica (IELE-3206)

Developed by:

  • Juan Sebastián Ortega (https://github.com/tadzio8425)
  • Nicolás Correal (https://github.com/Correaln47)
  • Maria Alejandra Moreno (https://github.com/marialemor)
  • Francisco Santamaría (f.santamaria@uniandes.edu.co)

Frontend - App preview

Index pageMain page

Product Design

Chain of used instrumentation
PCB DesignPCB Prototype
Prototype

Demo

https://github.com/tadzio8425/Chocolala/assets/78126968/3fff56c4-ae32-456e-9e00-969c29b892ba

Parts

20
QtyValueFootprintReferences
6Conn_01x01_SocketConnector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_VerticalGND, GND, GND, J3, J5, PWM
3, GND, GND
2ESP32-DEVKIT-V1ESP32:MODULE_ESP32_DEVKIT_V1U1, U6
2Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalBomba1, Pot1
2Screw_Terminal_01x03Connector_PinSocket_2.00mm:PinSocket_1x03_P2.00mm_VerticalEncoder1, Temp1
2Screw_Terminal_01x04Connector_PinSocket_2.00mm:PinSocket_1x04_P2.00mm_VerticalHX711, Nema17
1A4988A4988:MODULE_A4988_STEPPER_MOTOR_DRIVER_CARRIERU3
1L293DPackage_DIP:DIP-16_W7.62mmU2
1LM2596StepDown_LM2596:YAAJ_DCDC_StepDown_LM2596U5

Similar boards

  • 2 layers140.3 × 98.7 mmMEOW System Integration, the printed circuit board in 3D

    MEOW System Integration

    andrewgond/M.E.O.W-Mealtime-Electronic-Observation-and-Weighing

    M.E.O.W. automated pet feeder, a system that dispenses food and logs pet weight using load cells and RFID identification.

    40 parts1Apache-2.0
  • 2 layers130 × 90 mmROV, the printed circuit board in 3D

    ROV

    IslamHUFE/ROV-1-PCB

    32 parts
  • 2 layers100 × 100 mmK6 carrier rev2-8, the printed circuit board in 3D

    K6 carrier rev2-8

    opmedia-dev/k6_gpo_exhibit

    KiCad 10 project for a 2-layer carrier board (100 × 100 mm). All modules plug in via through-hole pin headers — no SMD soldering required.

    39 parts
  • 2 layers55.9 × 76.2 mmEjector, the printed circuit board in 3D

    Ejector

    d-weber/prusa-chain-production

    Add chain production capability to your Prusa i3

    20 parts117
  • 2 layers97 × 90 mmSatellite Arduino controller, the printed circuit board in 3D

    Satellite Arduino controller

    grinje/AutoSatTracker

    Tracking satellites with custom hardware based on stepper motors

    27 parts14
  • 2 layers144.8 × 104.1 mmController, the printed circuit board in 3D

    Controller

    phorton1/Arduino-cnc-cnc3018

    A FluidNC based implementation of a controller for a cheap cnc3028 machine

    66 parts13
  • 2 layers99.1 × 78.7 mmBalancingBot, the printed circuit board in 3D

    BalancingBot

    AlanFord/balancingBot

    my version of a balancing robot

    27 parts10
  • 2 layers99.5 × 67 mmController Board, the printed circuit board in 3D

    Controller Board

    kairobyte/bipedal_self_balance

    A bipedal self balancing robot with 2DOF in each leg. Built from scratch.

    23 parts7MIT

Questions

What parts does the Chocolala use?

20 parts, built around the L293D, LM2596S-5.0 and A4988. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Chocolala KiCad files?

From the tadzio8425/Chocolala repository on GitHub, at the commit this page was made from: the board is PCB/V1/V1.kicad_pcb and its schematic PCB/V1/V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Chocolala design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).