
K6 gpo carrier
opmedia-dev/k6_gpo_exhibit
KiCad 10 project for a 2-layer carrier board (100 × 100 mm). All modules plug in via through-hole pin headers — no SMD soldering required.

KiCad 10 project for a 2-layer carrier board (100 × 100 mm). All modules plug in via through-hole pin headers — no SMD soldering required.
K6 carrier rev2-8 is an open-source printed circuit board by opmedia-dev, from the opmedia-dev/k6_gpo_exhibit repository on GitHub. It is a 2-layer board of 100 × 100 mm with 39 parts on 39 nets, routed with 362 tracks and 24 vias.
It is built around the L293D and LM2596S-5.0. Its parts include 7 resistors, 5 diodes, 4 switches, 3 capacitors and 2 ICs. It belongs with the ESP32 boards of this library.
KiCad 10 project for a 2-layer carrier board (100 × 100 mm). All modules plug in via through-hole pin headers — no SMD soldering required.
See PINOUT.md for the complete pinout reference with every pin, net, and signal described.
| File | Description |
|---|---|
k6_gpo_carrier.kicad_pro | KiCad project file |
k6_gpo_carrier.kicad_sch | Schematic (text-documentation style — shows all nets and pin assignments) |
k6_gpo_carrier.kicad_pcb | PCB layout with component placement, ground-fill zones, and board outline |
generate_kicad.py | Python script that generates all files above (run to regenerate) |
PINOUT.md | Complete pinout reference (full tables for every connector and IC) |
k6_carrier_rev2-8.kicad_pcb | Hand-routed manufacturing master (Rev 2.1, as-built & bench-proven). Use this file for reorders. Includes the Rev 2.1 fixes: R7 (R_LIM 2.2 kΩ) and D1 in series in the opto leg, C3 (10 µF/63 V coupling cap) in series with the transformer secondary, and R2 (470 Ω) as the opto-LED shunt. Power/48 V nets widened. Not generated by the scripts — edit here directly. |
Reorders: fabricate from
k6_carrier_rev2-8.kicad_pcb. Thegenerate_*.pyscripts produce the earlier auto-layout boards and do not include the hand-routed Rev 2.1 corrections above — regenerating will not reproduce this master. Before ordering: continuity-check the built board, confirm R7 is populated in series, and confirm D1's banded (cathode) end faces the PC817 side.
| Parameter | Value |
|---|---|
| Dimensions | 100 × 100 mm |
| Layers | 2 (F.Cu + B.Cu) |
| Copper weight | 1 oz |
| Board thickness | 1.6 mm |
| Mounting holes | 4× M3, 4 mm from edges |
| Min trace width | 0.5 mm (power) / 0.25 mm (signal) |
| Min drill | 0.4 mm (vias), 0.8 mm (IC pads), 1.0 mm (headers) |
┌──────────────────────────────────────────────────────────────────────────────┐
│ (MH) [12V IN] [BUCK] [BOOST] [MAX98357A] [DAC] (MH) │
│ J3 J1 J2 J5 J6 │
│ │
│ [XFMR T1] │
│ ┌─────────────────────┐ │
│ │ │ [PHONE J4] │
│ │ ESP32 DevKit │ 3-pin screw │
│ │ U1 │ │
│ [BUTTONS] │ 2×15 pin headers │ │
│ J8 RING └─────────────────────┘ [C1] │
│ J9 CANCEL │
│ J10 RESET ┌────────┐ │
│ │ L293D │ │
│ │ U2 │ │
│ [R1 470R] [R2 220R] └────────┘ [R3 10K] │
│ [SD CARD] ┌────┐ │
│ J7 │PC817│ │
│ │ U3 │ │
│ (MH) └────┘ (MH) │
└──────────────────────────────────────────────────────────────────────────────┘
(MH) = Mounting hole M3| Ref | Description | Pins |
|---|---|---|
| J1 | LM2596 buck converter (12V → 5V) | 4: IN+, IN-, OUT+, OUT- |
| J2 | XL6009 boost converter (12V → 50V) | 4: IN+, IN-, OUT+, OUT- |
| J3 | 12V DC power input | 2: +12V, GND |
| J4 | Phone cord (3-pin screw terminal) | 3: Line A, Line B, Bell |
| J5 | MAX98357A DAC module | 7: VIN, GND, SD, GAIN, DIN, BCLK, LRC |
| J6 | DAC audio output (to transformer) | 2: L+, L- |
| J7 | SD card module (SPI) | 6: GND, VCC, MOSI, MISO, SCK, CS |
| J8 | RING button (to control panel) | 2: signal, GND |
| J9 | CANCEL button (to control panel) | 2: signal, GND |
| J10 | RESET button (to control panel) | 2: signal, GND |
| Ref | Part | Package |
|---|---|---|
| U1 | ESP32 DevKit V1 | 2×15 pin header socket (25.4 mm row spacing) |
| U2 | L293D H-bridge | DIP-16 (use IC socket) |
| U3 | PC817 optocoupler | DIP-4 (use IC socket) |
| Ref | Value | Purpose |
|---|---|---|
| R1 | 470 Ω 1W | Line current limit |
| R2 | 220 Ω ¼W | Optocoupler LED current limit |
| R3 | 10 kΩ ¼W | Optocoupler output pull-down |
| C1 | 100 nF | L293D decoupling capacitor |
| T1 | 600 Ω : 600 Ω transformer | Audio coupling to phone line |
gerbers/gerbers/ folder and upload to your fabricatorTypical 5-board order from JLCPCB: ~$2 + shipping.
If you modify the board layout, edit generate_kicad.py and run:
cd pcb
python3 generate_kicad.pyThis regenerates all three KiCad files from scratch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1N4007 | D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2, D3, D4, D5 |
| 4 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3-10K, R4-10k, R5-10k, R6-10k |
| 4 | M3 | MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 2 | R2-470R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1-470R, R2-470R |
| 1 | 10uf 63v | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | 12V_DC | BarrelJack_Horizontal | J1 |
| 1 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7-2.2K |
| 1 | 48V_DC | BarrelJack_Horizontal | J2 |
| 1 | 600R_XFMR | PinHeader_2x02_P2.54mm_Vertical | T1 |
| 1 | A+B | PinHeader_1x06_P2.54mm_Vertical | J_COIN |
| 1 | CANCEL | PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | DEV_Left | PinHeader_1x15_P2.54mm_Vertical | J_DEV_L |
| 1 | DEV_Right | PinHeader_1x15_P2.54mm_Vertical | J_DEV_R |
| 1 | ESP32_Left | PinSocket_1x15_P2.54mm_Vertical | J_ESP_L |
| 1 | ESP32_Right | PinSocket_1x15_P2.54mm_Vertical | J_ESP_R |
| 1 | L293D | DIP-16_W7.62mm | U2 |
| 1 | LM2596 | PinHeader_1x04_P2.54mm_Vertical | U_BUCK |
| 1 | Lamp | PinHeader_1x02_P2.54mm_Vertical | J_LAMP |
| 1 | MAX98357A | PinHeader_1x07_P2.54mm_Vertical | U_DAC |
| 1 | MODE | PinHeader_1x02_P2.54mm_Vertical | SW4 |
| 1 | PC817 | DIP-4_W7.62mm | U1 |
| 1 | Phone | TerminalBlock_bornier-3_P5.08mm | J_PHONE |
| 1 | RESET | PinHeader_1x02_P2.54mm_Vertical | SW3 |
| 1 | RING | PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | SD_Card | PinHeader_1x06_P2.54mm_Vertical | U_SD |
| 1 | Speaker | TerminalBlock_bornier-2_P5.08mm | J_SPK |

opmedia-dev/k6_gpo_exhibit
KiCad 10 project for a 2-layer carrier board (100 × 100 mm). All modules plug in via through-hole pin headers — no SMD soldering required.

opmedia-dev/k6_gpo_exhibit
KiCad 10 project for a 2-layer carrier board (100 × 100 mm). All modules plug in via through-hole pin headers — no SMD soldering required.

tadzio8425/Chocolala
IOT Chocolate Pot. Includes an app developed in React-Native that connects locally to an ESP32 in STA or AP Mode.

ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards

NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)

geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…


harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.


It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the L293D and LM2596S-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the opmedia-dev/k6_gpo_exhibit repository on GitHub, at the commit this page was made from: the board is pcb/k6_carrier_rev2-8.kicad_pcb and its schematic pcb/k6_carrier_rev2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask opmedia-dev before reusing the design.