Skip to the content
2 layers87.5 × 70 mmLaberinto, the printed circuit board in 3D

Open source robot for maze solving + line following

Size
87.5 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
29
Pads
112
Tracks, vias
257, 10
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
28 Oct 2015
Updated
31 Oct 2017

Overview

Laberinto is an open-source printed circuit board by CRM-UAM, from the CRM-UAM/CRMaze repository on GitHub. It is a 2-layer board of 87.5 × 70 mm with 34 parts on 29 nets, routed with 257 tracks and 10 vias.

It is built around the L293D. Its parts include 10 diodes, 10 connectors, 5 resistors, 3 capacitors and 2 switches.

Main components

1

README

README.md

CRMaze

Open source robot for maze solving + line following

Authors

Víctor Uceda & Carlos García
Club de Robótica-Mecatrónica, Universidad Autónoma de Madrid (CRM-UAM)
http://crm-uam.github.io

License

License: Attribution - Share Alike - Creative Commons (http://creativecommons.org/licenses/by-sa/4.0/)

Disclaimer

This hardware/software is provided "as is", and you use the hardware/software at your own risk. Under no circumstances shall any author be liable for direct, indirect, special, incidental, or consequential damages resulting from the use, misuse, or inability to use this hardware/software, even if the authors have been advised of the possibility of such damages.

Parts

34
QtyValueFootprintReferences
8Ddiode:custom_diodeD3, D4, D5, D6, D7, D8, D9, D10
5RResistors_ThroughHole:Resistor_Vertical_RM5mmR1, R2, R3, R4, R5
3CPCapacitors_ThroughHole:C_Radial_D8_L11.5_P3.5C1, C2, C3
1ADCSocket_Arduino_Pro_Mini:Socket_Strip_Arduino_1x02P3
1AnalogSocket_Arduino_Pro_Mini:Socket_Strip_Arduino_1x12P4
1CLEDLEDs:LED-5MMD1
1Dbattdiode:custom_diodeD2
1DigitalSocket_Arduino_Pro_Mini:Socket_Strip_Arduino_1x12P1
1I2C_IMUPin_Headers:Pin_Header_Straight_1x04P8
1L293DSockets_DIP:DIP-16__300_ELLIC1
1M1Connect:PINHEAD1-2P11
1M2Connect:PINHEAD1-2P12
1SWITCH_INVswitch:SWITCH_3PinSW2
1SW_PUSHButtons_Switches_ThroughHole:SW_PUSH_SMALLSW1
1battConnect:PINHEAD1-2P6
1buzzerPin_Headers:Pin_Header_Straight_1x02P7
1distancePin_Headers:Pin_Header_Straight_1x05P10
1line_irPin_Headers:Pin_Header_Angled_1x05P9

The 31 most common of 34 parts.

Similar boards

  • 2 layers178 × 145 mmUltra DB X51 v1, the printed circuit board in 3D

    Ultra DB X51 v1

    ExploreEmbedded/8051_DevelopmentBoard

    Design files and sample code for 8051 development Ultra Boards

    145 parts70
  • 2 layers84.3 × 58.4 mmEnocderDriver, the printed circuit board in 3D

    EnocderDriver

    NikodemBartnik/Small-Projects

    All of smaller projects (Arduino, PCBs, electronics, code)

    35 parts55
  • 2 layers56.4 × 72.6 mmRas pi hat, the printed circuit board in 3D

    Ras pi hat

    geno543/Redropi_highway

    the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…

    8 parts13
  • 2 layers92.5 × 62.5 mmDropGenPCB, the printed circuit board in 3D

    DropGenPCB

    harrislab-brown/DropGen

    DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.

    25 parts12CC-BY-SA-4.0
  • 2 layers47.5 × 49.5 mmElectronic, the printed circuit board in 3D

    Electronic

    zosko/magspoof

    Magspoof with Arduino Pro Micro

    5 parts11
  • 2 layers120.7 × 184.1 mmBeachRover circuit, the printed circuit board in 3D

    BeachRover circuit

    wizardofrobots/roverCode

    Jetson Nano powered Arduino Rover

    11 parts10
  • 2 layers90 × 53.4 mmOpenOx, the printed circuit board in 3D

    OpenOx

    hacklabkyiv/openox-pcb

    PCB design for OpenOx - open source oxygen concentrator

    43 parts7GPL-3.0
  • 2 layers69.6 × 75.7 mmMotor driver, the printed circuit board in 3D

    Motor driver

    mgrova/SLAM_Wheel-E

    SLAM using ROS with Wheel-E

    17 parts6GPL-3.0

Questions

How big is the Laberinto PCB?

It measures 87.5 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Laberinto use?

34 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Laberinto KiCad files?

From the CRM-UAM/CRMaze repository on GitHub, at the commit this page was made from: the board is Hardware/PCB_kicad/laberinto.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Laberinto design in my own project?

Its repository states no licence, so its author keeps all rights: ask CRM-UAM before reusing the design.